What have you done to your K2 today?

[EChavez]

Where did you buy your Corsa DB muffler? I can't find any online. Every website wants to sale me a 4 inch inlet/outlet version for a diesel. Thanks!

 

Lucked out and found one on eBay from a parted out truck. From what I've seen they're impossible to come across unless you get the entire cat back system. Best of luck sir!

[c.schill]

Removed the lower front air dam on my '16 Z71. This is just the piece that sweeps down in front of the wheels at the front corners. Gained me about 3 inches of ground clearance in the corners and about an inch in the center. Eventually, the plan is to removed the other black piece and chrome "skid plate" completely and replace it with an aftermarket skid plate and bar of some sort.

 

Before:

 

 

After:

[1300c]

 

Lucked out and found one on eBay from a parted out truck. From what I've seen they're impossible to come across unless you get the entire cat back system. Best of luck sir!

Thanks for the heads up. The hunt is on. I wonder if the db system for an 07-13 would fit? I thought I remembered reading on here somewhere where someone put the exhaust from their old sierra on a new one, and it fit with zero modifications.

[Abearclaw]

Removed the lower front air dam on my '16 Z71. This is just the piece that sweeps down in front of the wheels at the front corners. Gained me about 3 inches of ground clearance in the corners and about an inch in the center. Eventually, the plan is to removed the other black piece and chrome "skid plate" completely and replace it with an aftermarket skid plate and bar of some sort.

 

Before:

 

 

After:

i think the pictures need to be a little darker.....

 

 

Sent from my iPhone using Tapatalk

[slj2008]

i think the pictures need to be a little darker.....

 

 

Sent from my iPhone using Tapatalk

 

looks good. close up of the light bar / how is it mounted . Thanks

[Abearclaw]

 

looks good. close up of the light bar / how is it mounted . Thanks

LOL it's not my truck I dunno how it's mounted.

 

 

Sent from my iPhone using Tapatalk

[slj2008]

Removed the lower front air dam on my '16 Z71. This is just the piece that sweeps down in front of the wheels at the front corners. Gained me about 3 inches of ground clearance in the corners and about an inch in the center. Eventually, the plan is to removed the other black piece and chrome "skid plate" completely and replace it with an aftermarket skid plate and bar of some sort.

 

Before:

 

 

After:

 

looks good. how did you mount light bar

[roundsy]

I would do them summit white, ties into the grille nicer

 

Swapped my hostages back on.

[slj2008]

I would do them summit white, ties into the grille nicer

 

Swapped my hostages back on.

 

looks good. new grill inserts or whole grill ????

[EChavez]

Thanks for the heads up. The hunt is on. I wonder if the db system for an 07-13 would fit? I thought I remembered reading on here somewhere where someone put the exhaust from their old sierra on a new one, and it fit with zero modifications.

 

No problem. I don't see why not, it's just piping. From what I understand the DB series of exhaust systems was developed for the 07-13 body. The new "Sport" exhaust is for 14+.

[cbrsilv15]

 

looks good. new grill inserts or whole grill ????

He got high country grille. His headlights look like crap. My non cleared would look better. Should ship them to me asap to swap.

[LongrangeLauber]

Need everyone's opinion, even if they are negative lol. So I'm looking at either aftermarket replicas or aftermarket with a little more offset than stock. Im stuck between 3 wheels. As you'll see, I don't like anything too busy, just something simple and clean. Here are my choices

 

Sierra All Terrain replicas; I would stick with a 20" wheel and just use my current tires. This is one of two cheaper options

 

http://www.gm-trucks.com/forums/index.php?app=core&module=attach&section=attach&attach_id=64452

 

Dick Cepek DC-2; can't find a pic of them on a k2 truck, but if I went with these I would most likely go to an 18" wheel and have to purchase new tires, etc etc. This would be my most costly option but with a -13mm I think it would set the truck apart, besides the fact that a good bit of jeeps have them from what I see lol

 

http://www.gm-trucks.com/forums/index.php?app=core&module=attach&section=attach&attach_id=64453

 

And last but not least would be Dick Cepek Gunmetal 7's. If I went with these I think they actually look good in my factory 20" and I could reuse my current tires. These have a good offset at +13mm, so it wouldn't stick the tire out past the fender, but close to flush I believe. I have really grown towards them and I can get them to my door for under $900, a tad more than the Sierra reps, by maybe $80 or so

 

http://www.gm-trucks.com/forums/index.php?app=core&module=attach&section=attach&attach_id=64454

 

http://www.gm-trucks.com/forums/index.php?app=core&module=attach&section=attach&attach_id=64455

 

http://www.gm-trucks.com/forums/index.php?app=core&module=attach&section=attach&attach_id=64456

 

In my mind, comparing cost and looks, I think the Gunmetal 7's take the cake. On a black truck I think they look good. I also have always loved the Sierra All Terrain wheels, and those I wouldn't have to worry about any rubbing (don't think the Gunmetal 7 wheels would rub, but the DC-2 wheels with a 33" tire and a -13mm offset may rub on a 2" level). Anyways, y'all shoot your opinions my way!!

[c.schill]

i think the pictures need to be a little darker.....

 

 

Sent from my iPhone using Tapatalk

 

Yeah, oh well. Best I could do since I was at work and using my phone. I work nights. Really appreciate the sarcasm though.

 

 

looks good. how did you mount light bar

 

It's mounted with a license plate bracket mount. Since I'm in Ohio, we have to have front license plates, which gives a good place to mount a small one. The bracket I got was on amazon, link here. I plan on doing something more cosmetically appealing with the wiring as soon as I get a free weekend.

[Abearclaw]

 

Yeah, oh well. Best I could do since I was at work and using my phone. I work nights. Really appreciate the sarcasm though.

 

Yeah sounds like you should really "lighten up" big guy LOL

 

 

Sent from my iPhone using Tapatalk

[c.schill]

Yeah sounds like you should really "lighten up" big guy LOL

 

 

Sent from my iPhone using Tapatalk

 

Clever.