Jump to content

Recommended Posts

Posted

First time to upload pic. Hope this works.

 

 

attachicon.gif0830142204a.jpg

I just bought some relays today at RadioShack, I was planning to do this mod but I am not sure where to put these diodes. Where do I find all those wires? Hood, side door panel?

 

Thank you,

-Dylan.

Posted

I just bought some relays today at RadioShack, I was planning to do this mod but I am not sure where to put these diodes. Where do I find all those wires? Hood, side door panel?

 

Thank you,

-Dylan.

Under driver side dashboard. Tucked up under the dash. Not the big black box on the forward firewall

Posted

Does anyone have the link for the fogs on with high or can just tell me what other slot to put the other end of the diode in. I can't quite make it out in the picture that is attached. What color wire do the 2 ends go in?

Posted

Did this tonight with just a piece of wire covered in Heat Shrink and push in metal ends. Works like a charm

  • 3 weeks later...
Posted

Anyone notice that at times the mirror LEDs simply don't light up at all or are very dim? I had another member ask me about it, no more and more curious as it's becoming more frustrating daily to wonder if this mod will work right?..

Posted

does anyone know what slot the reverse and puddle lights are? I've got the new tow mirrors and have that 2 led in the mirror hooked to my puddle lights right now. if i could just jump that connection under the dash that'd be a lot easier then running a straight wire all the way through the door panel and grommet and whatever like i had to do for the amber markers to blink and be running lights

Posted

does anyone know what slot the reverse and puddle lights are? I've got the new tow mirrors and have that 2 led in the mirror hooked to my puddle lights right now. if i could just jump that connection under the dash that'd be a lot easier then running a straight wire all the way through the door panel and grommet and whatever like i had to do for the amber markers to blink and be running lights

Yes I did it in the tow mirror thread. I'll see if I can dig up the info, I know the cargo light wire is the grey with light green stripe and I think it's in the first connector all the way to the left (closest to the parking brake)

Posted

Yes I did it in the tow mirror thread. I'll see if I can dig up the info, I know the cargo light wire is the grey with light green stripe and I think it's in the first connector all the way to the left (closest to the parking brake)

ok that'd be great thanks!

  • 2 weeks later...
  • 2 months later...
Posted

I have tried twice to get this mod to work so that the leds on tow mirrors will turn on. I can not get that puddle light to turn on tho :tear:

  • 4 weeks later...
Posted

I just did mod. I was getting a little frustrated cus every time I would try to push the lead inside it would bend. Finally got it done and it works great.

 

2014 Silverado 2WT CC Summit White 4.3L V6

DROPKICK Edition

IG: jorge_dropkick_rangel

Posted

Anyone with Tow mirrors have issues with the LEDs in mirror flickering on one side?

 

 

Sent from my iPhone using Tapatalk

  • 2 weeks later...
Posted

First time to upload pic. Hope this works.

 

 

attachicon.gif0830142204a.jpg

Did not work for me. The Cargo light will come with reverse lights on when I hit the unluck on key fob but when truck is in reverse no reverse lights come on or no cargo lights. I have the correct diode part and installed just as your picture?

Posted
Okay so I was inspired by 2 threads here, one being the fog lights on with high beams, which I did and love. The other is a thread about putting a switch in the bed by the tailgate to turn on the cargo lights. That's a great idea but I wanted something simpler, so using the info in the fog light thread, and the link to the wire diagrams, I found the relay switch wires for the cargo lights and the reverse lights then used an extra diode from the fog light trick to connect the two. Now when it's dark and you unlock your doors with the remote, which activates the headlights and reverse lights, the cargo lights come on as well. This does activate the lights by the third brake light as well as the lights in the bed, just as if you pushed the switch on the dash. This is going to activate the cargo lights when you put the truck in reverse also, which will provide more light behind the truck, but it may glare off the rear window as well. I will be testing this tonight to see if I like it or not.

 

The reverse light relay wire is in the same brown plug as the fog lights. Number 26, its brown with 2 blue stripes.

 

The cargo light relay wire is also number 26, brown wire white stripe, but it's in the pink plug to the left of the brown plug.

 

I used the other diode from the 2 pack I bought to do the fog lights ( part # 1N004). The stripe goes toward the cargo lights in the pink plug.

 

As long as there's not too much glare to see while reversing at night then this should be a handy little trick!!

[/quote Hey so this should work on a 2015 as well right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Indeed a proper drain tap or drain valve with adapter that has a hose on it that opens up the valve as the adapter goes on is a slick setup and have that for certain highway tractors etc and other equipment that came from the factory with a tap but this L8T is pretty darned good other than me doing it on the floor and easy to touch hot exhaust and am not as agile as I used to be !. If I really want to pull a hot filter on an engine I will use an insulated set of thick neoprene gauntlet gloves but I am not in the hurry I used to need to be so things are done more relaxed and in theory somewhat safer ... I think LOL.    And as I mentioned the unique shape of the Amsoil 1 quart containers, while they might not work as well as an offset pour spout container for some awkward engine location applications, they are working a lot better with my Lisle funnel kit because of how they prop up on all four corners when upside down resting on the rim of the funnel where the typical quart container would never stay put without holding onto it. 
    • Well, I just hit 100K a few weeks back, and I can honestly say I have not had any major issues with my '21 5.3 Crew cab.  I have done most routine maintenance, oil changes, air filter, tire rotations, and a transmission drain and filter change (not even a full flush).  A couple of months ago, I started experiencing the dreaded CLUNK when coming to a stop, sometimes hard enough to literally push the truck forward! After researching here and in other forums/youtube videos, etc, I was thinking it's the slip yoke. I finally had a chance to take it to my local mechanic today, and he was not able to recreate the issue.  Amazing, since it does it nearly every time I drive.  He also said he can't simply grease my slip yoke/driveshaft splines, because I have a 1 piece driveshaft.  I am not sure what else I can do.  Has anyone else had this issue or have any idea what else it could be?
    • This is where the Fumoto drain valve comes in handy.  No mess and able to change oil hot, like right off the interstate hot.  Flows nice and you can direct it into a container. As for the oil filter, I use an old dixie cup or plastic one from McDonalds. It contains the oil as you pull the filter down and not all over your hand.
    • Well, if it did change from lifters to rocker arms, at least it would be easier to fix as they fail.
    • Doesn't hurt to try.  It's my understanding that you have to run it at least 4 or 5 oil changes for things to get clean.  Think about it, your engine didn't get dirty in just an oil change so over time it will slowly clean. It's the safest way to do it and not have seal issues.      I remember  a product that came out a long time ago, AutoRX, it was an additive you put in the oil and then drove for 3k miles. Some saw improvements and some didn't. It was suggested to use a non synthetic with it at the time. Same observation, use a couple oil changes and give it time to work. It also stated it worked best if you could drive on trips to keep the oil hot.  I'm sure if you ask AI it could tell you all about it.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...