Jump to content

Gas Pedal Flex Solution

FL335i
 Share

Recommended Posts

JRoyPDX Enthusiast

JRoyPDX

Posted
Posted (edited)

This pedal flex thing is real.

 

For the record this is a 2017 with almost 300 miles on it.

 

I shimmed between the plastic and the firewall with a piece of 3/16 steel about 1.25" wide and 3" long. It does not move at all now.

 

Here are YouTube links before and after

 

 

 

 

 

I've already noticed a more steady throttle. No lag due to it flexing and no harsh gear hunting from it flexing back or over throttling to compensate for the flex. This is a must fix.bc3d3edca2d71335bd06e8798360c8f9.jpg

 

2017 Silverado 1500 Z71 4x4 Regular Cab Short Bed

Edited by JRoyPDX
  • Like 1
  • Replies 292
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

FL335i
FL335i

After noticing the gas pedal has a lot of travel before it actually starts to work, I looked at it closely. I noticed it's a very bad design. There is a plastic bracket that is bolted to the floor p

Rubyralph
Rubyralph

I agree that a good video would be worth a million words of what the problem is and where it's located.   I filed the NHTSA complaint shown below:     VEHICLE SPEED CONTROL: 2014 Chevrolet Silver

FL335i
FL335i

I can't believe this post is still going strong almost 3yrs later. Glad my fix is helping others.

Posted Images

RUSSH Enthusiast

RUSSH

Posted
Posted

I have adjustable pedals and it was joke with the play/flex. I removed the whole assembly down to the plastic mount that has bolts attached to it.

I placed 2qty 1/8" thick plastic washers 1.125" in diameter over the 3qty bolts and put pedal assembly back and tightened down. I then took a plastic shim like a wood shim yet plastic and cut it down. At this point I pried up plastic mount and squeezed caulk and shim behind.

 

Took truck for "Hot Lap" and this thing now has probably 100% better throttle response! The best and first MOD evey body should be doing! Thanks OP why didn't I open this thread 1yr ago?

Excellent. So the adjustable pedals flex too? :driving:

Brews02ws6 Enthusiast

Brews02ws6

Posted
Posted

I've been anxious to try this fix to cure what I think is crappy throttle response. I just started looking at the videos posted and mine doesn't move like that. It's fully seated against the floor/firewall area. I can pull out on the whole assembly and the pedal moves up with it. So I think there's an unfortunate group who have this bracket/assembly bent or warped, so it flexes down where it should be with any pressure.

 

Kinda bummed, because I wanted to do this fix and gain some throttle response.

tanner709 Enthusiast

tanner709

Posted
Posted

The difference is night and day. I slipped a small wood shim behind and between the left side and bottom bolts, took it for a drive without even thinking... backed out of the drive way and nearly chirped the tires with the standard amount of throttle to get going.

 

thanks to the OP!

FL335i Enthusiast

FL335i

Posted
  • Author
Posted

Your welcome. I cannot believe how many people have done this mod. I thought it was just me coming from BMW's and had a very different expectation for a pedal. Turns out is a crap design that my 4yr old daughter could of done in pre-school.

davevinc1080 Enthusiast

davevinc1080

Posted
Posted (edited)

I have a 2015 5.3, non adjustable pedals. I pulled the carpet back a bit and was able to jam a wood shim in there and it achieved the fix (cant see it, does not look bad in my opinion. Much easier than a bunch of bolts). No tools, no cutting, didnt take anything apart. It was not night and day in my case, BUT I for sure do feel it improved throttle response. I feel more connected to the motor. Easy, quick, cheap fix for a bit more of a real feel into the machine.

Edited by davevinc1080
jono20 Enthusiast

jono20

Posted
Posted

I've done it now too. Cut up a plastic scraper and stacked enough pieces to get a good fit and wrapped some electrical tape around the stack before stuffing it between the plastic mount and firewall. Makes a huge difference when I'm travelling slowly around parking garages etc and am trying to to apply light throttle.

  • 2 months later...
jimbofoxman Enthusiast

jimbofoxman

Posted
Posted

Picked up a used 2015 about 2 weeks ago and it's not as bad as some others I've seen here, but mine is maybe 1/8". Will mess with tonight and compare.

  • Like 1
jimbofoxman Enthusiast

jimbofoxman

Posted
Posted

Picked up a used 2015 about 2 weeks ago and it's not as bad as some others I've seen here, but mine is maybe 1/8". Will mess with tonight and compare.

 

Shoved a small piece of 1/8" plywood up under there. Definitely a different feel (a better feel) on the pedal between pressing the accelerator to the engine's reaction.

  • 1 month later...
jaymiles007 Enthusiast

jaymiles007

Posted
Posted

I have adjustable pedals and it was joke with the play/flex. I removed the whole assembly down to the plastic mount that has bolts attached to it.

I placed 2qty 1/8" thick plastic washers 1.125" in diameter over the 3qty bolts and put pedal assembly back and tightened down. I then took a plastic shim like a wood shim yet plastic and cut it down. At this point I pried up plastic mount and squeezed caulk and shim behind.

 

Took truck for "Hot Lap" and this thing now has probably 100% better throttle response! The best and first MOD evey body should be doing! Thanks OP why didn't I open this thread 1yr ago?

 

Hey, I have the adjustable pedals on my 2018 and the entire pedal seems loose and moves loosely in every which direction. I'm not sure if I have a fluke or if this is normal between all of the adjustable pedal models. I had a 2014 with non adjust and it had minimal flex but I still did this mod. Looking at my 2018 It doesn't look like as easy of a solution.

 

Any way you could post some pictures or more detailed process of what you did? Would be appreciated if you did.

mookdoc6 Senior Enthusiast

mookdoc6

Posted
Posted

 

Hey, I have the adjustable pedals on my 2018 and the entire pedal seems loose and moves loosely in every which direction. I'm not sure if I have a fluke or if this is normal between all of the adjustable pedal models. I had a 2014 with non adjust and it had minimal flex but I still did this mod. Looking at my 2018 It doesn't look like as easy of a solution.

 

Any way you could post some pictures or more detailed process of what you did? Would be appreciated if you did.

 

 

I have a detailed written instructions under one post! I am not great with computers but the instructions are EXACT and will help you very much.....It never fix the "intended" floating aspect of pedal but will stop the "actual flex in materials and delayed throttle responses enormously" My post is legit and more involved than a paint stick fix.....It's a fix that your never coming back to "fix again or it might have moved etc" good luck son! Stay away from the ecoboost's man I hate ecoboost's!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,758
    Total Members
    8,960
    Most Online
    Randy Ginoza
    Newest Member
    Randy Ginoza
    Joined

  • Who's Online   5 Members, 0 Anonymous, 2,134 Guests (See full list)

  • Latest Articles

  • Posts

    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Paid $2.72 for E85 today.
    • Atlas
      Gas Prices

      By Atlas · Posted

      Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • scotthvac.net
      2022-24 halogen - led grille swap

      By scotthvac.net · Posted

      2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • davester
      Replacement Radiator

      By davester · Posted

      And use RA's 5% discount code if you buy from them.  google for the code, one is always available.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...