Jump to content

Denali cluster in SLT

NIXONRIDE

By NIXONRIDE
in Modifications & Accessories

 Share

Recommended Posts

bndawgs Senior Enthusiast

bndawgs

Posted
Posted
3 hours ago, GTPprix said:

FAQ – Please read before contacting us – thank you!

 

Q: I have a base model truck will this mod work?

A: Yes we can retrofit program the Denali or smaller color cluster for your application. See the thread from pgamboa regarding the steps needed to make this work properly on your end.

 

Q: I already bought a cluster will it work?

A: That depends on MANY factors, we HIGHLY recommend you contact us first with the part number you are looking at to confirm fitment.

 

Q: How much does this whole shebang cost?

A: We only do programming and the cost varies depending on what cluster you get, the condition, any special requests etc. Typically most people do this mod for around $500 total including cluster.

 

Q: I bought a cluster and plugged it in and now some things dont work, can you program it?

A: We have posted multiple warnings to not plug units into your vehicle until we program them, if you plug it in prior you own it and the tamper flags you created; we wont touch it.

 

Q: Whats the average turnaround time?

A: Typically one weekend or less depending on work load.

 

Q: What part numbers should I be looking for?

A: You want the Denali part number for your EXACT year and specification. If you have a 2016 diesel you need a 2016 diesel cluster. 2015 has two model years effectively 2015 and 2015.5 as always ANY part you are looking at please send us the part number to confirm fitment prior to purchase!

 

Q: I want to move ahead what info do I need to send you to get a quote and check compatibility?

A: Your VIN, the cluster part number you are looking at and its condition.

 

 

Thank you!! :)

Out of curiousity, is there any way to remove the tamper flags once they've been set?  

  • Replies 1.2k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

NIXONRIDE
NIXONRIDE

Thanks to Mr. Chris White I now have a Denali gauge cluster in my 2016 Sierra SLT. Once he did his programming it was plug and play. Everything works just like it does in My wife's 2016 Yukon Denali

GTPprix
GTPprix

You’ve been asking and we’ve been listening. Granted it took longer than anyone would have liked we are changing up our operations a bit to hopefully make things easier on everyone; especially the con

CaliBoy_661
CaliBoy_661

Well I got my Cluster already and already installed... here are some pictures from mine     Sent from my iPhone using Tapatalk

Posted Images

pgamboa Senior Enthusiast

pgamboa

Posted
Posted

Thanks@GTPprix. I’m sure my inbox will be inundated more than ever. Lol.

All I did was make a video on how to install the cluster :) and adding front park assist along the way. LOL.

It all works great!

For anyone looking to do this upgrade, please do your homework, obtain part #s for your specific year, then shoot an email during those hours. Patience is key here. Provide as MUCH information as you can in that one email so you don’t lose time on back/forth correspondence (especially if you’re anxious to do this upgrade).

The FAQs are a great.




Sent from my iPhone using Tapatalk

  • Like 3
sk Senior Enthusiast

sk

Posted
Posted
4 hours ago, GTPprix said:

If you are emailing regarding this service please make sure you are sending 1. Your VIN 2. The clusters you are looking at (we are not suppling part numbers there may be 20 per application so there could be 60 per truck) and we will confirm fitment 3. The condition of the cluster you are looking at so we can quote the pricing. 

 

Thanks!

Okay.  I supplied the VIN in my first email but from one your previous posts I thought you said to email you for the cluster part number FIRST so I didn't buy the cluster yet.  Guess I misunderstood.  Mines a 2015 (possibly 2015.5) Silverado so I'll look for Denali clusters for that.  But a few quick questions maybe you can answer here:

 

1)  Can the background digital colors be changed from the GMC red to Chevy blue?

2)  Can the Tach and Speedo overlays be changed out?  I have a Z71 and kind of like the "reverse sawtooth" background.

3)  I think the Tahoe LTZ was available in 2015 with this cluster.  I assume that would work as well.

 

Thanks!

GTPprix Senior Enthusiast

GTPprix

Posted
Posted
1 hour ago, bndawgs said:

Out of curiousity, is there any way to remove the tamper flags once they've been set?  

The "normal/corporate" answer: No. 

The whatever it takes answer: Sure if you want to spend thousands of dollars replacing a shit ton of modules LOL Then again with that part of the process it'll be very obvious why you're doing it. 

1 hour ago, pgamboa said:

Thanks@GTPprix. I’m sure my inbox will be inundated more than ever. Lol.

All I did was make a video on how to install the cluster :) and adding front park assist along the way. LOL.

It all works great!

For anyone looking to do this upgrade, please do your homework, obtain part #s for your specific year, then shoot an email during those hours. Patience is key here. Provide as MUCH information as you can in that one email so you don’t lose time on back/forth correspondence (especially if you’re anxious to do this upgrade).

The FAQs are a great.




Sent from my iPhone using Tapatalk

 

Thanks man much appreciated!!! :D

1 hour ago, sk said:

Okay.  I supplied the VIN in my first email but from one your previous posts I thought you said to email you for the cluster part number FIRST so I didn't buy the cluster yet.  Guess I misunderstood.  Mines a 2015 (possibly 2015.5) Silverado so I'll look for Denali clusters for that.  But a few quick questions maybe you can answer here:

 

1)  Can the background digital colors be changed from the GMC red to Chevy blue?

2)  Can the Tach and Speedo overlays be changed out?  I have a Z71 and kind of like the "reverse sawtooth" background.

3)  I think the Tahoe LTZ was available in 2015 with this cluster.  I assume that would work as well.

 

Thanks!

Not sure why it quoted you on that, that actually wasnt aimed at you just a prelude to the FAQ post LOL

 

1. Not on a 2015

2. No these are Denali specific

3. No, they had it in 2016. 

sk Senior Enthusiast

sk

Posted
Posted

Chris,

 

Thanks for the quick response.  I love the Denali cluster and wanted to do this upgrade but don't know if I like the red menus.  If I decide to do it I'll pick up one from a 2015 and let you know!

pgamboa Senior Enthusiast

pgamboa

Posted
Posted

Chris,

 

You mean I missed the opportunity for a blue theme on my 2016 cluster?  LOL.

BlkSS Enthusiast

BlkSS

Posted
Posted
1 hour ago, GTPprix said:

The "normal/corporate" answer: No. 

The whatever it takes answer: Sure if you want to spend thousands of dollars replacing a shit ton of modules LOL Then again with that part of the process it'll be very obvious why you're doing it. 

 

Thanks man much appreciated!!! :D

Not sure why it quoted you on that, that actually wasnt aimed at you just a prelude to the FAQ post LOL

 

1. Not on a 2015

2. No these are Denali specific

3. No, they had it in 2016. 

 

1 hour ago, pgamboa said:

Chris,

 

You mean I missed the opportunity for a blue theme on my 2016 cluster?  LOL.

Chris,

 

Me too, with the trouble that mine has caused you guys for my 2016 diesel, you could have switched a 2016 Denali Diesel cluster to the Chevy Blue?

GTPprix Senior Enthusiast

GTPprix

Posted
Posted
1 hour ago, sk said:

Chris,

 

Thanks for the quick response.  I love the Denali cluster and wanted to do this upgrade but don't know if I like the red menus.  If I decide to do it I'll pick up one from a 2015 and let you know!

 

The only way that would work is if we custom programmed a 2016 tahoe (GAS ONLY LOL) and you upgraded the rest of the modules on the most bus to 2016's. This is something we'd discuss via email. 

1 hour ago, pgamboa said:

Chris,

 

You mean I missed the opportunity for a blue theme on my 2016 cluster?  LOL.

 

I think people forget that changing the theme doesn't  change the rest of the physical colors LOL It can be done but it would be all SUV graphics. 

 

12 minutes ago, BlkSS said:

 

Chris,

 

Me too, with the trouble that mine has caused you guys for my 2016 diesel, you could have switched a 2016 Denali Diesel cluster to the Chevy Blue?

Nah you'd still have red/white physical gauges :(

BlkSS Enthusiast

BlkSS

Posted
Posted
4 minutes ago, GTPprix said:

 

Nah you'd still have red/white physical gauges :(

Gotcha, thanks Chris.

USCGRetiredJosh Enthusiast

USCGRetiredJosh

Posted
Posted

I have a 2015 SLT that you programmed the Denali cluster for, I’m getting rid of my truck next week. Will the cluster work in someone else’s vehicle?

  • Like 1
1SLOW1500 Senior Enthusiast

1SLOW1500

Posted
Posted

very interested in this. 2016 sierra. But I can't find the part anywhere. I tried the listed part number. GMdirect said it was discontinued. I didn't read all 26 pages. So what is you contact info? I will email you my vin. thanks 

 

Note may buy USCGRetiredJosh cluster..... 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Lower trims ( WT, Custom, Silverado ( aka LT )

      By newdude · Posted

      HD at the moment, are kinda their own deal.  How LTZ sells on those vs on 1500, there is a difference.   They are merging most of the mid trims on 1500.  LT, RST and LTZ are replaced by one trim, Silverado.  LT and RST are a BIG portion of sales.    Bad naming choice aside, the new Silverado trim will offer the spread of options that those three trims offered.  So expect to see things like the tech package for example, and maybe memory seats.  And LT Trail Boss will now just be "Trail Boss" (formerly LT Trail Boss) but will offer content spread like the new Silverado trim will.  The press photos showed the Trail Boss (formerly LT Trail Boss) has access to Super Cruise now, which on the current truck was High Country only.        
    • dennismc
      2021 vs 2026 handling (1500 X31 Sierra)

      By dennismc · Posted

      I installed a Hellwig rear sway bar on my 21 Sierra SLT, it made a huge difference on how the truck handles, no body roll, the trucks much more planted now. Not sure of the suspension differences between the 21 and 26,  if its body roll your having a sway bar will solve it. 
    • Old Bay
      frustrating P0446 code

      By Old Bay · Posted

      So a follow up and my fix. I found in online searches the live data to look at on a scan tool to verify the fuel tank pressure sensor was working.  It showed an spec number towards the lower end of the rang, but in spec.  Then while it was running opened the gas cap and the pressure should change.  It didn't change even a tiny bit.  The data for the purge valve said it was open...never changed. So then I measured the voltages on the plug for the fuel pressure sensor and they matched what it should be.  So local car quest parts had the sensor in stock...it was a bit of a pain to remove and an even bigger one to get it to actually go back in.  It helped to unbolt the driveshaft and bungie cord away from the gas tank to give a bit more room to work. So fuel tank pressure sensor in I cleared the code, and started it up.  I went to the scan tool's live data and... Eureka! The pressure number was different and fluctuated a bit.  So took it on a short drive and pressure number varied saw the purge valve go from closed to open and back to closed.  Drove it to and from work for roughly a week plugged in the scan tool no codes.  I took it in to get tested and passed.  In my state's infinite wisdom (oops meant greed), since I pushed the test with the maximum extensions I have to take it back in by Feb '27 to 'get it back up to date', then my next test won't be until Feb '29. 
    • newdude
      loose lug nuts

      By newdude · Posted

      Any grease on the stud threads of any kind?   Wheel studs should have NOTHING on them for proper torquing and so the nuts don't back off.     Are all of the mating surfaces clean?  So wheel, rotor and hub?     We've had plenty of trucks at work with that wheel, this is a first to me.  Makes me think they've got a lube tech putting anti-seize on all the wheel studs or some kind of grease, and they need to stop doing that.  To have 11 other trucks with the same exact problem.      
    • Flynlow
      2027 Chevrolet Silverado: Official Discussion

      By Flynlow · Posted

      I was a Chevy guy for years, then switched to GMC because I liked the looks better.  I'm actually thinking I like the Chevy looks better than GMC for the first time in a lot of years.   One thing I know for certain, the new GMC dash is hideous!  Chevy wins this one!  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...