Jump to content

splash guard pics GM vs husky


Recommended Posts

Posted

Thinking about putting splash guards on my truck to help protect the paint since i drive on gravel some everyday. But having a hard time finding pictures of them installed on a 14 up Sierra. Also is one a superior product to the other? Looking for opinions of those that have them. The husky's look to be a simpler install since they dont use rivnuts but thats about all I have been able to find by searching.

 

Thanks

Posted

I have GM - they came with truck ( Package deal ).

Was really hoping somebody would have some on a sierra so I can see what they look like on them. I assume they are different between the silverado and sierra since the silverado doesnt have the wheel arch plastic trim?

Posted

I just installed the Husky ones on my silverado, love them! Very easy install and great fit. I didn't want any logos on them.

Posted

Was really hoping somebody would have some on a sierra so I can see what they look like on them. I assume they are different between the silverado and sierra since the silverado doesnt have the wheel arch plastic trim?

 

 

here ya go!

gallery_160425_4323_1985258.jpg

Posted

Keep the photos coming. I wonder if the Sierra plastic trim in the wheel arch fits the Silverados as well. I like this look. Are the guards the molded guards? There are so many options on the website to choose from.

 

 

Sent from my iPhone using Tapatalk

Posted

 

 

here ya go!

gallery_160425_4323_1985258.jpg

 

Very nice!

 

Can you take a closer pic of the front one so I can see better how it blends in?

Posted

Keep the photos coming. I wonder if the Sierra plastic trim in the wheel arch fits the Silverados as well. I like this look. Are the guards the molded guards? There are so many options on the website to choose from.

 

 

Sent from my iPhone using Tapatalk

 

unfortunately, that fender trim is exclusive to the Sierras.

Posted

 

unfortunately, that fender trim is exclusive to the Sierras.

So they can't be purchased separately?

 

 

Sent from my iPhone using Tapatalk

Posted

So they can't be purchased separately?

 

 

Sent from my iPhone using Tapatalk

 

there's a small lip on the sierras that's not on the silverado. totally different fenders.

Posted

 

there's a small lip on the sierras that's not on the silverado. totally different fenders.

Thanks for the clarification! Won't chase that rabbit down the rabbit hole.

 

 

Sent from my iPhone using Tapatalk

Posted

Thanks for the clarification! Won't chase that rabbit down the rabbit hole.

 

 

Sent from my iPhone using Tapatalk

 

yeah, it sucks. i actually like that subtle fender liner on the sierras and initially wanted it on my silverado as well.

Posted

I really was disappointed that the stock GMC liners would not fit the Silverado as well. I am an additional

Vote for the factory splash guards. Mine are perfect and they see a lot of use on gravel roads.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • How about them NICKS!!! 
    • Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...