Need floor jack recommendations

[USCGRetiredJosh]

My current floor jacket is dying, and I think it’s time for a new one. Looking for suggestions on a new floor jack. The vehicles I use the jack for our my Sierra,, wife’s 4Runner, and sons Passat.

 

i have added fluid to the old jack still no help. I can only get a quarter of a full pump out of it. I do not see any signs of fluid leaking either. 

[diyer2]

Costco.

$100 for a 3 ton.

Maybe in stock at your local store.

Like mine.

 

[Robopie]

I have this one:  https://www.harborfreight.com/3-ton-aluminum-racing-floor-jack-with-rapidpump-62530.html

 

It's been great/flawless for me. Had it 2 years so far now and use it on my Sierra, '15 Accord and wife's Grand Cherokee. 

 

 

(I used to have a 1.5 ton aluminum jack from HF - it was too short for my Sierra)

[Hoginedgewood]

Bleed it, open the valve as though you are going to lower it, then pump the handle. Sometimes it works. 

[99silveradoz71]

I picked up a 3 ton at HF and have been happy with it.

[Logan Lanfear]

https://www.tractorsupply.com/tsc/product/big-red-3-ton-suv-floor-jack

Thats the one that I bought from tractor supply.  Been going on two years with it and Im still happy.  Price is pretty decent too.

[bdbake01]

Here’s my favorite (for the price). Goes super low, lifts quite high, goes deep (there’s a joke in there somewhere), T handle control is nice. Only drawback is it’s kinda heavy. But I haven’t found a job it couldn’t do. Lifts everything I have. My 13 yr old daughter rotated the front tires with it!  The long handle is also good for leverage. Not great for tight spots. 

https://m.harborfreight.com/2-ton-low-profilelong-reach-steel-heavy-duty-floor-jack-with-rapid-pump-60678.html

 

[USCGRetiredJosh]

Thanks for the info everyone. 

[steve76t]

+1 on the Harbor Freight jacks.  They have a decent selection and work very well.  Wouldn't recommend for daily shop use, but for typical home use they last for years. 

[Ipait]

+1 for Costco jack. I got one and like it a lot.

https://www.costco.com/3-Ton-Professional-Grade-Aluminum-And-Steel-Service-Jack.product.100222458.html

[Mike GMC]

IMO a floor jack is not the place to save money.  There is too much riding on it, literally.  Buy the highest quality jack you can get.  If you do, you'll likely pass it down to you kids.

[yamaha0343]

I've had the Craftsman 3 ton for probably at least 10 years. Still works great. Get a good set of Jackstands as well.

[dab5577]

I went with a 3.5 ton from NAPA. Solid jack. https://www.napaonline.com/en/p/NLE7916420


Sent from my iPhone using Tapatalk

[Cheverado]

35 minutes ago, yamaha0343 said:

I've had the Craftsman 3 ton for probably at least 10 years. Still works great. Get a good set of Jackstands as well.

Same here

[Toolbox1]

I picked up this one from Home Depot. On sale right now.  Works great and action is smooth

 

3-Ton Low Profile Floor Jack with Speedy Lift

https://homedepot.app.link/YnPJn15c0J