Jump to content

Recommended Posts

Posted

Had mine flushed this morning. It was covered under warranty even though I don’t have the “shudder”.

Have only driven 100 miles, but seems to shift a bit smoother... time will tell. [emoji1695]


Sent from my iPhone using Tapatalk

Posted

I had the flush done a few days ago. 200 miles and the shudder is gone. However, the truck still shifts like it is confused. The clunk is still preset. Taking it in Thursday for a TSB covering the valve body. I will report back after the fix is done.

Posted

This is the main reason I traded in my '15 - I complained about the transmission every time I took it in for anything, and was basically told that everyone has the same complaint and there was not a fix. They flushed the fluid 2 or 3 times, replaced the TC and it was still a piece of shit. I had the extended warranty, but that had a $250 deductible every time I wanted to use it, so I traded it in on a '18 Denali - so far (3200 miles) the transmission is night and day different... although this one has the same 70mph shake as the '15 did. 

Posted

What was up with the transmission in your 2015? My 2018 doesn’t have any shaking at higher speeds, just the low speed clunk upon throttle application 

Posted

Yeah, when I ordered my 18, CC, 6.2 the owner (a close buddy of mine) of the dealership looked at me and said you know, you may have issues with the transmission clunking, told him I’ll bring it back to him and he’ll fix it, he laughed. First week, drove to Austin and noticed it, then while parked in a parking lot it felt like I got bumped, no one around but the transmission just thumped hard. I later did a tune, turned off the AFM and along with not having shifting issues, haven’t felt the thump since

 

 

Sent from above

 

Posted
1 hour ago, TXGREEK said:

Yeah, when I ordered my 18, CC, 6.2 the owner (a close buddy of mine) of the dealership looked at me and said you know, you may have issues with the transmission clunking, told him I’ll bring it back to him and he’ll fix it, he laughed. First week, drove to Austin and noticed it, then while parked in a parking lot it felt like I got bumped, no one around but the transmission just thumped hard. I later did a tune, turned off the AFM and along with not having shifting issues, haven’t felt the thump since

 

 

Sent from above

 

You did the tune in your 18? What tune did you do? I want to do a black bear tune but it just sucks that they can’t tune the TCM. It’s always seemed to me like this whole deal is simply a tuning issue on GMs part

Posted
You did the tune in your 18? What tune did you do? I want to do a black bear tune but it just sucks that they can’t tune the TCM. It’s always seemed to me like this whole deal is simply a tuning issue on GMs part


Mine is just a SuperChips tune, set on performance along with disabling AFM and other preferences. Did notice acceleration difference too on my 6.2 after my CST lift and 34” Nitto Ridge Grapplers


Sent from above
Posted

For anyone watching this thread,  I'm  scheduled to go in this Monday 3/18.  My truck would get the shudder literally nearly everyday for the weeks leading up to this. 

 

I kid you not, since I scheduled this a few days ago, it has only shuddered one time and has overall been shifting better than usual.  Like wtf???

 

The way my service advisor talked it sounds like they will perform this flush no matter what the results of the test drive are. 

Posted
3 hours ago, SkiDooNick700 said:

For anyone watching this thread,  I'm  scheduled to go in this Monday 3/18.  My truck would get the shudder literally nearly everyday for the weeks leading up to this. 

 

I kid you not, since I scheduled this a few days ago, it has only shuddered one time and has overall been shifting better than usual.  Like wtf???

 

The way my service advisor talked it sounds like they will perform this flush no matter what the results of the test drive are. 

Let’s hope they aren’t just making you feel good...I’m told that the PICO test needs to show something for GM to pay the dealership for the fluid and time. Maybe you have a good dealer  :thumbs:

Posted

I was just at the dealership to get the flush done.I told them I had the shudder which I don't just hopping to get the flush done.They said just like SS502 said it didn't hit the PICO test.There not allowed to change the fluid unless it hits the score needed.

Posted

Ill be so frstruated if thats the case.  I will have to work with my serivce advisor for next steps... come back in a couple 100 miles etc...? Blahhh i dont even want to think about it!! 

Posted

Dropped it off Monday night. Didnt hear back today.  Maybe they were like "oh man this trans is f'ed we gotta put a new one in"

 

LoL wishful thinking!! 

Posted
On 3/12/2019 at 10:21 PM, dewey05sd said:

I had the flush done a few days ago. 200 miles and the shudder is gone. However, the truck still shifts like it is confused. The clunk is still preset. Taking it in Thursday for a TSB covering the valve body. I will report back after the fix is done.

 

Can you share info on the Valve body TSB?  Just got off the phone with my Service Adviser.  He updated me that the trans tech is on the phone with GM Tech Support trying to upload whatever data files they created to prove that there is an issue with my trans.  He also mentioned that they may need to replace the Valve Body. 

Posted

I wish I had more information. I ended up taking it in and I had the shop foreman ride with me. I wasn’t able to replicate the confused shifting. Not that it helps me, you or anyone for that fact but he did say out of 300 transmissions he has serviced for this problem only 2 he said shifted flawlessly. At this point, I am just going to drive it until something serious happens and hope GM comes out with a fix for it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,920
    Total Members
    8,960
    Most Online
    Frank V
    Newest Member
    Frank V
    Joined
  • Who's Online   5 Members, 0 Anonymous, 1,209 Guests (See full list)


  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...