Jump to content

Recommended Posts

Posted
3 hours ago, Mbcorry said:

For me with a family, I almost always am using the seat for somebody to sit in

That totally makes sense then. One time I shoved my nephew into the bed of the truck with the bedcover on. I could fit several kids back there.

  • Haha 3
Posted
On 2/23/2019 at 11:18 AM, Mbcorry said:

My question is, why are so many people into bucket seats?

 

For me, having an extra seat in my car is like having an extra bedroom in my house, it’s always a good thing to have and should bring up the value.

 

That there is the contradiction inherent in your question, basically.

 

I'm about to sell a 16yr old Quadrasteer truck.  I expect to be waiting a while to get a good price, but that very rare and desirable feature should increase value.  The very few people that know and want Quadrasteer will pay a premium for it.  There's not a lot of demand, but there's probably even less supply.

 

If the bench seat option was rare, then it could increase value, but it's not rare.  There will be plenty of supply though and not a lot of demand because "so many people into bucket seats".

Posted

Wife and I have little dogs that make long road trips with us.   It was always nice to have them in between us in the jump seat in my older trucks.  

  • Thanks 1
Posted
3 minutes ago, bcato said:

Wife and I have little dogs that make long road trips with us.   It was always nice to have them in between us in the jump seat in my older trucks.  

That center seat belongs to Rex. :fume:   Just try to take if from him.  

 

A 30 pound Rat/Pit mix who has is territory staked out and isn't bashful about letting anyone else know it. He goes with me everywhere and always. Wife comes sometimes too. She gets the 'other seat'. :lol:

 

IF there would have been a TRUE flat bench seat option...I'd have one. Rex likes space. 

  • Like 1
Posted

+1 On the jump seat. It gives me one more seat to put the kids in when they are fighting in the back. Do i use it all the time, no, but its available when needed.

 

Been looking at upgrading to a 2019, but don't think Chevy offers a universal remote (garage door opener) in a jump seat configuration. In order to have it, i must upgrade to bucket seats.

Posted (edited)

I chose the jump seat.  My wife and I have three grand kids and we watch her mother.  I wanted the extra seat just in case.  Frankly I hope I never use it, but it’s there if needed.  As for the console, I never keep things in my truck and other than water, I dont eat or drink in my truck.  I might have a different beverage on a trip, but that’s it.  In my console is just a flashlight, a pair af reading glasses and my phone charging cable.  Sunglasses in the upper storage bin.  So, on balance, the jump seat seemed like a better option.  Plus, wife likes that extra room up front for a bag.  Like a computer bag or camera bag that she wants handy on a trip.  

Edited by GN2018
Posted

The new "jump seat" console that folds down now has a shoulder belt in lieu of the lap belt in the K2. With the console folded down (if you're big and tall like me) the "horn" that the shoulder belt reels in stuck into the side of my leg/knee. Super uncomfortable. My '16 had the bench, and I didn't mind it. Used that seat once. But due to that damn shoulder belt I had to go with a full console, and I don't regret it. 5332a3cefa73cfe1b15f5b9bccbf39a5.jpg

 

Sent from my SM-N950U using Tapatalk

 

 

 

 

Posted

Not sure if they improved it for the T1 but I hate the jump seat in the K2s. Folded down for storage, it sits right where I put my elbow when holding the wheel with my right hand. Cup holders are too small for my water bottle (not sure if they're any bigger in the consoles), nowhere out of sight but still handy for me to keep my sunglasses, tire pressure gauge, pens, parking passes and various other stuff I like to carry with me. Plus I wouldn't really want someone sitting there when I'm driving anyway. 

Posted

You’re not the only one, but there aren’t many of us. I had two dealers tell me they didn’t even think a leather bench was available. I knew it was and ended up just doing a factory order because it was virtually impossible to find one with a 6.2L. The nearest one was a few hundred miles away if I remember right and still wasn’t exactly what I wanted otherwise.

 

It’s scheduled to be built next week. We’ll see how much that seat gets used, but I’m guessing a fair amount. I know when I was a kid that was always my favorite seat in the car.

 

I did find one with a leather bench and a 5.3 to sit in before I ordered mine and found the comfort to be just fine. In the driver and passenger seats, I mean. Only a kid could love that middle position.

  • Like 1
Posted

Mbcorry - I'm in the same boat, did you manage to find a trailboss with bench and leather? I couldn't.  ended up ordering an at4 and plan on swapping the console out with a "booster" from an sle.  

Posted
9 minutes ago, potato said:

Mbcorry - I'm in the same boat, did you manage to find a trailboss with bench and leather? I couldn't.  ended up ordering an at4 and plan on swapping the console out with a "booster" from an sle.  

I did the LTZ with leather and a jump seat and love it!

Posted
On ‎2019‎-‎02‎-‎23 at 11:29 AM, OnTheReel said:

Probably better if it’s just a kid next to you, but I remember rolling 3 wide in regular cabs with two other grown men. Not cool and very cramped. Crew cab killed the jump seat.

We used to call the guy in the middle the "cross country skier". 

  • Haha 1
Posted (edited)

I really like the jump seat in my K2. 

 

Five days a week, I use the open centre floor for my work bag, and extra knee room.  I find the three cupholders very useful.  They fit the bottles I use perfectly.  The storage is a compromise, but the console still has a useful amount.  I keep a beach towel in there, that I use as a temporary seat cover, if I'm getting into the truck dirty or really sweaty.

 

I've used the jump seat for a passenger once so far, since I got the truck in the fall.  I went on a hike with my parents, and my two dogs.  The two muddy dogs got the back of the cab, and all three of us humans had sufficient space in the front of the cab for the short drive. 

Edited by rkj__
Posted

I got bucket seats for comfort, I test drove an RST with a bench and it was the worst seat I have ever been in.  It was hard and uncomfortable, not to mention I feel sorry for anyone that has to sit in that middle seat, its bad, really bad!

  • Like 1
Posted
21 hours ago, Trailboss75 said:

I got bucket seats for comfort, I test drove an RST with a bench and it was the worst seat I have ever been in.  It was hard and uncomfortable, not to mention I feel sorry for anyone that has to sit in that middle seat, its bad, really bad!

The "Bench" seat trucks have the same bucket seats as the console trucks. All thats different is the middle Seat/Console. So unless the comfort comes from having a different arm rest, i dont quite see how you  can feel a difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,782
    Total Members
    8,960
    Most Online
    ShowMeShooter1332
    Newest Member
    ShowMeShooter1332
    Joined
  • Who's Online   1 Member, 0 Anonymous, 6,762 Guests (See full list)


  • Latest Articles

  • Posts

    • I was around and remember that era very well, so I'm calling b/s on that statement. If they were that bad no police department or taxi company would've bought a single one ... but they were used in both services (and fire) for DECADES. They were bulletproof and proven. Even the early 21st century ones weren't too bad! The early models were legendary.   Mine is proof, but people like atlas are blinded by agenda and refuse to believe facts right before their very eyes.   Even decades after they were built, a new generation started driving them, posting all their builds and shenanigans on Grandmarq.net and Crownvic.net. The failures would show up then, since they all were deep past 100k-150k miles by that point, and younger drivers tend to be a little aggressive, especially with vehicles than can lay a one-tire fire for as long as you hold your foot in it. They've more than proven themselves over the decades.   The only thing that'll really take them out is road salt. The bodies and sheet metal were garbage. A victim of the cheapout FoMoCo and GM have been partaking in before then, and since.   Today it's the stuff that counts - the undercarriage that rots away first!    GMs Caprice was no slouch either. Reliable as a stone ax - the opposite of what they build now.    
    • Let me know how your vehicles do in 10 years. You don't know ******, kid. 😂    There's a reason that Panther platform was used as police, fire, and taxi service for DECADES ... long before you were born, apparently.
    • If your connector also has a big lever to get the connector on and off, you don't want to force the lever either way, as it becomes a bigger problem if you bust the lever or the mechanism it works.
    • It's just useful to disconnect the battery to prevent odd shorting out when unplugging/plugging stuff together.  I also  touch the two cable ends together (after disonnecting) to drain the small amount of stored battery energy in various modules.   I believe the main system where you need to be more concerned with, so you need to do the above and then wait some time, iss when you are working on the air bag system, to prevent inadvertent firing of the air bags.   The in-cab switches are just that, plain switches, it's generally not a problem to swap them in/out.  For my '12, I'll get an error message on the dash if I power up the truck w them unplugged, but that's it (power up= turn the ignition on).   The ITBC located above the spare tire is a computer that manages the trailer brake system.  That is probably more important to have the battery disconnected.  It does have to be programmed to the truck, either before or after it's installed, for it to work.  For my '12, I had a very hard time reinstalling the main connector to it (IDK if yours is the same or not), it turned out the silicon seal was jamming up, preventing it from going on all the way.  I finally got it fully installed by lubing the seal with a bit of dielectric grease, then it slid on and latched in place easily.
    • JR ! I just got the truck back from the Dealership today . The technician did a cold remote start on the truck this morning and it made the noise . It was determined that it was a starter issue and replaced it under warranty . Of course   it did not make the sound after a new starter was put in because the truck was not cold . We will we see what happens tomorrow morning when I start the truck cold  . Keep tuned !   Oh I found a video on YouTube of a cold start and it did the same thing your truck and mine do , I will see if I can find it and post it up
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...