Jump to content

Recommended Posts

Posted (edited)

Here's my build

 

spacer.png

 

spacer.png

 

Specs:

  • 18x8.5 +0 Black Rhino Chase Rotary Forged in Brushed Gunmetal
  • 295/70/18 Falken Wildpeak AT3
  • ReadyLift 1.75" Level Lift

 

Very minor rubbing resolved with minor trimming. I created a post on our site of the trimming requirements for those looking to go with a larger set up on the AT4: https://wheelsasap.com/gmc-at4-oversized-tire-trimming-guide/

 

 

Edited by WheelsASAP.com
grammar
  • Like 7
  • Thanks 1
Posted
On 3/30/2020 at 3:40 AM, Trevor Munsell said:

285 45 22s on oem replicas. I went the budget route to get me into some 22s. Now im wanting to upgrade for a little more sidewall to either 275 50 or 305 45s. What y'all think?

20200323_152207.jpg

Can you give some info on your wheels? Brand, spacers if any, website?

Posted

Custom Offsets. 4play cv43 gloss black. 3/8"hubcentric spacers added to order for $63. Ride great..no vibration. Got for unbelievable price. 

Posted
On 5/2/2020 at 10:24 AM, WheelsASAP.com said:

Specs:

  • 18x8.5 +0 Black Rhino Chase Rotary Forged in Brushed Gunmetal
  • 295/70/18 Falken Wildpeak AT3
  • ReadyLift 1.75" Level Lift

 

Very minor rubbing resolved with minor trimming. I created a post on our site of the trimming requirements for those looking to go with a larger set up on the AT4: https://wheelsasap.com/gmc-at4-oversized-tire-trimming-guide/

 

 

Thanks for this - great resource!!! 

  • Like 1
Posted
40 minutes ago, Supercup said:

Thanks for this - great resource!!! 

Anytime my friend! Feel free to PM me with any questions you may have.

Posted
On 4/22/2020 at 8:08 AM, loud_pipes said:

ReadyLift SST, Atturo Blade XT 305/55/20 (33x12.5), Moto Metal MO970 20x10 with 0 offset

991e784d7dd1d263ba13ce3d27a5bd14.plist118874e57086df09a6a99311aa0877b5.plist991e784d7dd1d263ba13ce3d27a5bd14.plist


Sent from my iPad using Tapatalk Pro

Did you need to use spacers for the wheels?  Looks great.

Posted

Mine is a 2020 Custom 4x4 with 5.3L (NOT a trail boss)


35x12.5x20 Atturo Trail Blade X/Ts (Measure out to 34.92” and 12.52”)

 

2.25” Pro Comp level up front (actually sitting .75” nose High at the moment so getting a 1” Rear block put on soon).

 

No spacers. No trimming. No rubbing (although to be fair, I deleted the rock/mud guards as soon as I got her) 

6BBC3DEE-65CF-4C81-975E-C662F3399121.jpeg

  • Like 2
Posted

Mines a 2019 Silverado RST 

I went with a 3" Superlift

Wheels are a 20x10 -18mm Fuel Rebel wrapped in a 285/60r20 Nitto Ridge Grappler

That comes out to be a 33.7" Wheel setup 

 

IMG_1920 copy.jpg

  • Like 7
Posted
On 5/9/2020 at 9:50 AM, Trevor Munsell said:

Custom Offsets. 4play cv43 gloss black. 3/8"hubcentric spacers added to order for $63. Ride great..no vibration. Got for unbelievable price. 

Hey thanks for the info! I got a couple more questions tho?. Did you need the spacers to clear the calipers or just for the look. Were the factory wheels studs long enough to take the spacer and the wheels no problem?  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • You have to have the last word. 
    • I am sure that was quite the pass experience and not a great place to experience during the winter when the conditions are not good. I've seen video of that pass and also more detailed information and pictures about the wrecks at that one hair pin turn where tractor trailers have flown right off the cliff and I am sure from all the warning signs that you know the exact curve that was !. After all there is a reason why a song was made about Wolf Creek Pass !. By the way and I didn't realize this either when I bought my truck as its nothing I even thought of that would be programmed into the cruise control and this occurs in either the basic or the more advanced cruise that controls your distance behind a vehicle and that is the brakes going down a hill are being applied as soon as the vehicle goes a certain speed over the set cruise speed. While it certainly does force downshifts in the transmission as you found out with cruise on while going down hill, its also dragging the brakes as needed to keep the speed controlled to what the cruise was set to. For me, I find that unsettling simply because I have no concept then as to how MUCH brake input is being used a and just how hot are those brakes getting and the wear factor as well. I can see that system getting a person into trouble on long mountain grades while pulling a trailer as it would not only be standing on the brakes of the pickup without any driver input, it would also be automatically applying the trailer brakes and it could cause a run away unit by overheating the brakes. Its one thing on a shorter hill and if the driver allows it to do its thing but on a long mountain grade is where things could get so out of hand. As someone a while back on this forum said, they had someone following them at night I believe on a down grade and had the cruise set and the person behind them could see the brake lights being energized all the way down the hill. I figured when I saw your comment that you didn't know and would have no way of knowing that your truck was applying the brakes and that you would and rightfully so assume you only used the brakes when you pressed on the pedal to slow down more than the cruise set speed for the slower sharp curves. So its good knowledge to know this about the newer GM trucks, certainly when doing any descending on long mountain grades. In the future try kicking off the cruise and use the the manual mode on a pass to see what that is like as I know myself when I first experienced it I thought no way can this engine be holding me back this well and tried the same hill in manual mode and sure enough the engine was revving way up and still could not hold the trucks speed down like it could in cruise mode.    Fuel mileage, that is where a really low sleek type of car can do better at higher speeds, certainly it starts sucking fuel too but a tall pickup is pushing massive amounts of air and also allowing a lot more air under it and the tow mirrors as in elephant ears pushing through the wind  as well. Driving like grandpa is about as good as one can do when driving one of these if trying to get the best fuel economy they can. I bet these trucks would get the best mileage they can if driven on a freeway in Florida if not busy traffic at a sedate speed and that sea level elevation without hills, vastly different then Colorado !. 
    • It’s over for almost 24 hours. Are you playing Eddie Haskell? 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...