Jump to content

Post your T1 wheel/tire setup

BevoXV
 Share

Recommended Posts

Tboykin51 New Member

Tboykin51

Posted
Posted

Have a 2020 1500 RST. Stock suspension. Looking at putting a 3.5” - 4” kit on the truck.. want to run an aggressive looking 35” tire on stock 20” wheels but don’t want serious rub.. anyone running a similar setup? Any pictures out there? 

E5F55048-CA0E-4BB6-A43D-6AF05AF4E172.jpeg

  • Replies 1.2k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

BevoXV
BevoXV

I know the K2 guys have one of these threads so I figured we should too. Think it’d be useful for others. Post pics of your setup! Make sure to add specs of the wheels/tires, spacers, suspension, rubb

bamulk
bamulk

Method NV 305 18x9 -12 Offset Cooper Discoverer S/T Maxx 295/70/18 1.5 Level (Trailboss) Slight Rub on mudflap on full lock.   

BevoXV
BevoXV

Caliper clearance!

Posted Images

diambo4life New Member

diambo4life

Posted
Posted (edited)

I installed these awhile ago but this is my 5.3 Elevation. It is levelled (in the rear). 20x9 Fuel Rebels on 33" Kendas. 

DSC_0016 (2).JPG

Edited by diambo4life
  • Like 1
puppykat33 Enthusiast

puppykat33

Posted
Posted

Here is my setup

Fuel Vapor 20x10 -19mm offset

Nitto Ridge Grapplers in 275/65/20

I put on ready-lift 2inch leveling kit

did a mudflap bracket delete with trimming the innermost portion of the flap and zip tied the liner in one spot.

No rub at all

 

IMG_2135.jpg

  • Like 2
Trevor Towers Enthusiast

Trevor Towers

Posted
Posted (edited)

Used this forum to pick out my specific wheel and tire set up so I’m returning the favor!

 

20” Vossen HF6-4s 20x9.5- +15 offset.

275/60R20 Falken Wildpeak AT3W.

 

it has a 3” Superlift lift kit. The tire size is same as stock on the stock 20” OEM wheels. There is zero rubbing at full turn. This setup gives a similar look to a leveled AT4. 
 

4843B25E-DFCA-4AED-BA91-7287F15E1EB3.jpeg

332AACD9-FB09-4FC2-9A02-5549A684FD42.jpeg

Edited by Trevor Towers
Adjust wheel specifications listed erroneously.
  • Like 2
PandonSF Enthusiast

PandonSF

Posted
Posted
14 hours ago, Trevor Towers said:

Used this forum to pick out my specific wheel and tire set up so I’m returning the favor!

 

20” Vossen HF6-4s 20x9 - 0 offset.

275/60R20 Falken Wildpeak AT3W.

 

it has a 3” Superlift lift kit. The tire size is same as stock on the stock 20” OEM wheels. There is zero rubbing at full turn. This setup gives a similar look to a leveled AT4. 
 

4843B25E-DFCA-4AED-BA91-7287F15E1EB3.jpeg

332AACD9-FB09-4FC2-9A02-5549A684FD42.jpeg

Looks great! Do you happen to have a photo down the side showing how much poke there is? 

Trev Towers New Member

Trev Towers

Posted
Posted
10 hours ago, PandonSF said:

Looks great! Do you happen to have a photo down the side showing how much poke there is? 


I do. It should be somewhere around 1” of poke over factory. Also added a picture of the clearance at full lock. I wasn’t interested in going any bigger than the stock tire sizing because I didn’t want to impact fuel economy too much with weight, overall I believe the new setup is just a touch lighter. 

226B5CEA-E40B-4104-85FA-2F77DB58F34F.jpeg

8663CF26-27C1-44C3-BD02-CA5722AE98AC.jpeg

PandonSF Enthusiast

PandonSF

Posted
Posted
2 hours ago, Trev Towers said:


I do. It should be somewhere around 1” of poke over factory. Also added a picture of the clearance at full lock. I wasn’t interested in going any bigger than the stock tire sizing because I didn’t want to impact fuel economy too much with weight, overall I believe the new setup is just a touch lighter. 

226B5CEA-E40B-4104-85FA-2F77DB58F34F.jpeg

8663CF26-27C1-44C3-BD02-CA5722AE98AC.jpeg

Thanks, that looks good. I actually had ordered these wheels a few days ago but in a +15 offset and 9.5” wide. Didn’t realize they had the other offset and widths available.

Trevor Towers Enthusiast

Trevor Towers

Posted
Posted
13 minutes ago, PandonSF said:

Thanks, that looks good. I actually had ordered these wheels a few days ago but in a +15 offset and 9.5” wide. Didn’t realize they had the other offset and widths available.


Vossen has a custom sizing program, you can get them in configurations from 8.5” - 12” wide and offsets from 0 - +48mm. But I just double checked my receipt, it says 20x9.5in +15mm offset. I called the sales person to confirm because he was telling me 0 offset over the phone previously, I think he was just mistaken. He said that the 20x9.5 +15 is the STANDARD size for these. I’ll update my post. What kind of tires are you going to fit on your vehicle? 

Trevor Towers Enthusiast

Trevor Towers

Posted
Posted
30 minutes ago, PandonSF said:

Thanks, that looks good. I actually had ordered these wheels a few days ago but in a +15 offset and 9.5” wide. Didn’t realize they had the other offset and widths available.


Here are some more pictures for you as well. I included an image of my city MPG in just normal driving to show I can still maintain essentially the same MPG I was getting before. All city driving.
 

 

 

577644E3-AD79-41E7-B53B-FCAA08001CFD.jpeg

3392D7FE-944A-46C2-93AD-61528A9DA936.jpeg

  • Thanks 1
PandonSF Enthusiast

PandonSF

Posted
Posted
37 minutes ago, Trevor Towers said:


Vossen has a custom sizing program, you can get them in configurations from 8.5” - 12” wide and offsets from 0 - +48mm. But I just double checked my receipt, it says 20x9.5in +15mm offset. I called the sales person to confirm because he was telling me 0 offset over the phone previously, I think he was just mistaken. He said that the 20x9.5 +15 is the STANDARD size for these. I’ll update my post. What kind of tires are you going to fit on your vehicle? 

Oh nice, thanks! I have some Toyo open country at3 275/60r20 im going to put on them. 

BowtieBill Enthusiast

BowtieBill

Posted
Posted

Here is mine.

2020 Silverado LTZ Z71 4WD

Bilstein 6112's in front, 2" level

Bilstein 5160's rear with 1" block

Fuel Sledge 20x9, +19mm, ceramic coated

Toyo A/T III, 285/60/20

No rub. Tires stick out past fender by about 5/8". Very happy how it came out.

2020 Silverado_New Wheels_2mp.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • SwitchBladeSierra
      HELP! DUMPING COOLANT

      By SwitchBladeSierra · Posted

      If anyone lands here looking for an update - the problem wasnt with the hose, the clamp, etc... I purchased a metal Thermostat housing that just must not of been made to spec. It just wouldn't plug up the hose.. Went back to a plastic cheap housing - leak fixed. Some plumbers tape carefully placed in tandem with a clamp likely would've gotten the job done.   Best,
    • SwitchBladeSierra
      AUX switch install

      By SwitchBladeSierra · Posted

      For anyone following, this is what I have deduced from this forum - and my very specific niche case. Please do let me know if you see me going in the wrong direction here. For context, I have a 16 sierra 1500 w/t. Has TC and Cargo light switches. Removed the switch to find the X1 and X2 of the S48A connection populated with wires (x1 10-14, and x2 1-5).   Took photos of the X61A-X5 to find the wires from S48A-X1 land here at their respective pins (10, 11, 17, 23 on the X5). Was hopeful that this means my X51A fuse box has the appropriate pins... No cigar. So now I will be routing wires from the rear of the X61A-X1 to the engine bay and to their respective negative relay triggers. Please see to the diagram. If any has insight as to where the S48A-X2 pins 4 and 5 land that would be awesome.   Note: please disregard fuse sizes. Main fuse will like be 25A, all mini bus fuses will likely be 10-15A   Cheers
    • Grumpy Bear
      Sugar Bears 2015 GMC Terrain SLE-2 2.4 AWD

      By Grumpy Bear · Posted

      287,500 Mile Service   8/13/2026   Reset Fuel Trims   Since the work done in the previous post there was a good improvement in response in all areas except right after a fill up where the LTFT would go -20%+ for about four miles while the STFT was near neutral. Before the work they both went very negative for a few miles after a fill up but act normal thereafter.    We did a systems check of the vapor recovery system for functionality and ability to hold a vacuum. That checked out fine. But this doesn't mean the charcoal canister is dead in the water. Testing that is next up. For now the reset of the fuel trims.    I intentionally shorted the fill exactly two gallons to eliminate any chance of filling the canister. On start up the trims were behaving normally until I got up and rolling where the LTFT went -10 / -11%% but the short was + 2 to 0%. Within a mile the the STFT offset the LTFT and by 2 miles they were neutral. HUGE improvement but still not hunky-dory.    I'll watch them for a few days. Perhaps another tank where I will fill completely to 'first click' and compare. Meanwhile on the hunt for a new canister and I'll toss another purge value at it for good measure. Pending the outcome of the canister test that is. Progress of any kind is welcome.    Fuel economy improvement with bringing hole #3 back to the living was a noticeable bump to the positive. Even on the few miles I drove after the refill I already see another bump up by the trims reset.     She's purring like a kitten with a warm bowl of milk.    BTW, adding 50 rpm to the idle took the majority of the negative timing out on cold start up and leaned the cold idle. No longer burbles in the cat. What a dumb way to heat a cat.      
    • OnTheReel
      Post your UOA, (used oil analysis) here

      By OnTheReel · Posted

      Yeah, shame I can’t really get that filter easily anymore. Running a PureOne. Your fave!    TAN would be neat to see. Confirmation I ran it too long probably. 🤣
    • superdave160
      Roll up bed cover experiences

      By superdave160 · Posted

      My son and I both bought new trucks in 2017. Both of us immediately put Truck Covers USA American Roll Covers on our trucks. My son still has his truck and it never sees the inside of a garage. We live in Alabama, so not much snow. My truck was my daily driver and was in the garage when I wasn't driving it or at work. No issues with either cover even after almost 9 years. About a year ago I sold my truck to my brother and bought a 2025 Silverado 2500. The second thing that I put on that truck was a new Truck Covers USA cover. They are very well made and have a very positive locking system. I looked at a Retrax and my concern was the way that the cover locked to the rail. BTW, the first thing I put on the new truck was step bars. Those new trucks are high!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...