Jump to content

Recommended Posts

Posted
On 3/15/2023 at 5:36 PM, tpr20 said:

 

That's actually a great idea re: the 2091-21 high country wheels. Those are good looking wheels and I think the chrome will look pretty sick to be honest. And agree on Alenzas, mine are only 22k miles in so no rush to get rid of perfectly good tires!!

I ordered them yesterday, I'll post when they are installed, probably next weekend by the time they ship and I get them put on. 

Posted
On 3/5/2023 at 9:07 AM, Russ757 said:

Swapped out the trailrunner at for some ko2. Not gonna lie, once I got the ko2 was in the fence because the wranglers were a very good performing tire with a great look for a street truck. But 50 miles later, can see why all the love. 

 

275/60r20 fuel vapor  20x9 +2mm

PXL_20230305_143239558_copy_1494x840.jpg

PXL_20230305_143257758_copy_1394x784.jpg

PXL_20230305_143233784_copy_828x1472.jpg

IMG_20230307_204245_731.jpg

Looks nice! Stock suspension? Level?

  • Like 1
Posted (edited)
23 minutes ago, dfanzz01 said:

Looks nice! Stock suspension? Level?

Anyone have any insight on putting on 35 x 12.5 x 20’s or 22’s on my 2020 High Country? Current set up is FOX 2.5 Coil Overs up front with Reservoirs, Icon Upper front Control Arms,  Fox 2.5’s in the rear with reservoirs with Deavers rear leaf springs and 2” blocks and Fender Delete Kit in the front and the back.  It’s basically a leveling kit that raised the front about 3” but the front was so high that I added a 2” block in the rear to achieve and actual lift of about 1” and level the front with the rear.  I don’t mind trimming what needs to be trimmed at all.  I get so many different opinions on whether or not this can be done.  Reading thru these posts seem to say that it’s totally doable.  Any suggestions would be appreciated. 

Edited by Tdola
Missing info
Posted
On 3/17/2023 at 8:35 AM, eppieguy said:

I ordered them yesterday, I'll post when they are installed, probably next weekend by the time they ship and I get them put on. 

Awesome! Can't wait to see - meanwhile my truck's driver window was smashed in....nothing taken b/c there was nothing to take, but I'm a bit sidelined right now on mods. I did just get a Corsa catback on about a week ago - sounds excellent

  • Sad 1
Posted
On 3/19/2023 at 11:11 AM, Tdola said:

Anyone have any insight on putting on 35 x 12.5 x 20’s or 22’s on my 2020 High Country? Current set up is FOX 2.5 Coil Overs up front with Reservoirs, Icon Upper front Control Arms,  Fox 2.5’s in the rear with reservoirs with Deavers rear leaf springs and 2” blocks and Fender Delete Kit in the front and the back.  It’s basically a leveling kit that raised the front about 3” but the front was so high that I added a 2” block in the rear to achieve and actual lift of about 1” and level the front with the rear.  I don’t mind trimming what needs to be trimmed at all.  I get so many different opinions on whether or not this can be done.  Reading thru these posts seem to say that it’s totally doable.  Any suggestions would be appreciated. 

I would love to see pictures.  I have a similar setup for my 2021 AT4- i just haven't installed it yet.  Everything is sitting in my garage waiting for a warm weekend...  So I have the Fox 2.5s and the Icon UCAs for the front like you, but I opted for Fox 2.0s for the rear.  Honestly, the main reason I went with the 2.0s instead of the 2.5s wasn't because of price, but because I don't want to have to unbolt the bed of my truck when ever the shocks have to be serviced.  I wish Fox had rear 2.5s where the reservoir was mounted directly to the shock like the way Icon does.

Posted

Here you go! 2019-2021 High Country chromed wheels 

308545A1-17D1-4B8A-A2DA-8930FA248689.jpeg

  • Like 1
Posted

275/65r20 with 2 inch spacers and the at4 factory lift and readylift +2 sst. Exactly 4 inches of lift now after the struts and shocks settled. Upgrading to 35x12.50x17 venom xt soon and pro comp 17.

20230314_104951.jpg

  • Like 2
Posted
On 3/21/2023 at 11:33 PM, Jethro71 said:

I would love to see pictures.  I have a similar setup for my 2021 AT4- i just haven't installed it yet.  Everything is sitting in my garage waiting for a warm weekend...  So I have the Fox 2.5s and the Icon UCAs for the front like you, but I opted for Fox 2.0s for the rear.  Honestly, the main reason I went with the 2.0s instead of the 2.5s wasn't because of price, but because I don't want to have to unbolt the bed of my truck when ever the shocks have to be serviced.  I wish Fox had rear 2.5s where the reservoir was mounted directly to the shock like the way Icon does.

You don’t have to unbolt the bed at all. You can easily route the Shock without doing that. Plenty of room. 

Posted

Here is my 2022 refreshed Silverado 1500 LTZ. 
3inch strut spacers with 3.5 Maxtrac lift spindles

rear 4 inch blocks. 35x 12.50 R20 AT Nittos.

stock rims 2 inch spacers. Had to trim inner

front wheel wells both sides zero rub.

579425AE-E578-4C6A-88FF-5CB8E24A114C.jpeg

34E55C60-C966-4346-A6E5-091AB1824DB8.jpeg

8A3D5D76-D8C5-491F-9934-228F5EF24AEF.jpeg

  • Like 1
Posted (edited)
On 3/21/2023 at 11:33 PM, Jethro71 said:

I would love to see pictures.  I have a similar setup for my 2021 AT4- i just haven't installed it yet.  Everything is sitting in my garage waiting for a warm weekend...  So I have the Fox 2.5s and the Icon UCAs for the front like you, but I opted for Fox 2.0s for the rear.  Honestly, the main reason I went with the 2.0s instead of the 2.5s wasn't because of price, but because I don't want to have to unbolt the bed of my truck when ever the shocks have to be serviced.  I wish Fox had rear 2.5s where the reservoir was mounted directly to the shock like the way Icon does.

 

Edited by Tdola
Posted (edited)
4 minutes ago, Tdola said:

 

4BA7BD19-68FC-4FE8-8731-4583964B3F7F.jpeg

115D5E7A-D35F-4E44-A40C-7C8B3626F24F.jpeg

Edited by Tdola
Duplicate
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined
  • Who's Online   1 Member, 0 Anonymous, 871 Guests (See full list)


  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...