Jump to content

Recommended Posts

Posted

So approximately how much does the DEF fluid add to yearly cost, say you drive 12-15k a year? Just looking for a general figure 

Posted
13 minutes ago, ArTurf said:

So approximately how much does the DEF fluid add to yearly cost, say you drive 12-15k a year? Just looking for a general figure 

DEF cost is peanuts, compared to the other costs of ownership.

 

Usage will be about 1.5 or 2% of fuel.

Using a my current 6.6L as an example.

It runs about 1100 or 1200 miles per gallon of def. 

 

Average US DEF cost is about $2.75 (according to google search).

 

15,000 miles/yr  / 1100 miles/gal  x 2.75 $/gal = $38 per year.    

 

FWIW, avg diesel price/gallon is about the same.

 

 

I never understand all the folks that say they won't buy a diesel because the cost of def is so high....

Clearly it's insignificant. 

 

 

 

 

 

 

 

 

 

  • Like 1
Posted
30 minutes ago, redwngr said:

DEF cost is peanuts, compared to the other costs of ownership.

 

Usage will be about 1.5 or 2% of fuel.

Using a my current 6.6L as an example.

It runs about 1100 or 1200 miles per gallon of def. 

 

Average US DEF cost is about $2.75 (according to google search).

 

15,000 miles/yr  / 1100 miles/gal  x 2.75 $/gal = $38 per year.    

 

FWIW, avg diesel price/gallon is about the same.

 

 

I never understand all the folks that say they won't buy a diesel because the cost of def is so high....

Clearly it's insignificant. 

 

 

 

 

 

 

 

 

 

So, what about the other cost of ownership?

 

Are you talking about oil changes, insurance, truck payment.

 

I would get a 3.0 mainly for mileage, the most I tow is my garden tractor.

 

My current vehicle(Honda Pilot) does not handle towing very well.

Posted
1 hour ago, jaslon said:

So, what about the other cost of ownership?

 

Are you talking about oil changes, insurance, truck payment.

 

I would get a 3.0 mainly for mileage, the most I tow is my garden tractor.

 

My current vehicle(Honda Pilot) does not handle towing very well.

I was referring to the costs that will be in place no matter what engine is selected. 

Financing, depreciation, insurance, tires and so on. 

 

Oil changes etc will be similar. 

Diesels will have replaceable fuel filter -- but like DEF, the cost per mile is tiny.

 

and so on.

 

 

Posted

I don't see any additional expense with the diesel, except the fuel costs more. The oil change is probably a little more, DEF cost, and fuel filters. However there are no spark plugs to change, no coil packs, no wires.

Posted

Another question, How much more does the 3.0 weigh than the 5.3/6.2? Just wondering. Part of me wants this engine over my 6.2

Posted
1 hour ago, davester said:

...The higher compression also may result in a higher likelyhood of blown head gaskets.

I doubt that. It's not like that the 3.0 is the first diesel ever invented.

 

so long

j-ten-ner

  • Like 2
Posted
28 minutes ago, ArTurf said:

Another question, How much more does the 3.0 weigh than the 5.3/6.2? Just wondering. Part of me wants this engine over my 6.2

It might weigh less.

 

Haven't seen a weight calculator for 2020.  (Most years they have published one).  I checked the 2019 one, and didn't find LM2 info included. 

 

2020 curb weights show the LM2 crew/short/4wd weighs less than the L87 crew/short/4wd.  I think they're both gonna be 10 speeds.  

Posted
2 hours ago, j-ten-ner said:

I doubt that. It's not like that the 3.0 is the first diesel ever invented.

 

so long

j-ten-ner

It's not that this particular engine is more prone to blown head gaskets, but in general, perhaps because they see more miles, or that they are more expensive, so people are more likely to repair vs replace, but diesels seem to have blown head gaskets more frequently than gas engines, and a head gasket repair is more expensive compared to the same problem with a gas engine.

 

And, for the 3.0 engine, I believe there is that belt at the back of the engine that has to be periodically replaced every 150k, which is a fairly expensive thing to replace...

Posted
10 hours ago, ArTurf said:

Another question, How much more does the 3.0 weigh than the 5.3/6.2? Just wondering. Part of me wants this engine over my 6.2

Looked it up it weighs the same as the 6.2

Posted
7 hours ago, davester said:

It's not that this particular engine is more prone to blown head gaskets, but in general, perhaps because they see more miles, or that they are more expensive, so people are more likely to repair vs replace, but diesels seem to have blown head gaskets more frequently than gas engines, and a head gasket repair is more expensive compared to the same problem with a gas engine.

 

And, for the 3.0 engine, I believe there is that belt at the back of the engine that has to be periodically replaced every 150k, which is a fairly expensive thing to replace...

What does this belt drive?

Posted

The belt drives the oil pump.

 

Nobody has replaced one yet as far as I know so we really don't know what it will cost. From a video I watched, a GM engineer said/made it sound like you disconnect the trans and slide it back a little bit and then there is a service plate to access it. Probably not ideal for some but not as bad as some are making it out to be. I've heard people trying to say the engine has to be pulled to change! Lol 

Posted
9 hours ago, davester said:

It's not that this particular engine is more prone to blown head gaskets, but in general, perhaps because they see more miles, or that they are more expensive, so people are more likely to repair vs replace, but diesels seem to have blown head gaskets more frequently than gas engines,

Nonsense.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,921
    Total Members
    8,960
    Most Online
    Enduro73
    Newest Member
    Enduro73
    Joined
  • Who's Online   5 Members, 1 Anonymous, 1,387 Guests (See full list)


  • Latest Articles

  • Posts

    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • I was unaware of that, thanks for updating me.
    • Yes.  The 2.7 Turbomax has Active Fuel Management.  It is NOT the same as the V8s.  Totally different system.     Here is an article from GM when the 2.7 came out explaining the cylinder deactivation and the valve lift system.  Starts at the section called "SCS Valvetrain":   New Turbocharged 2.7L 4-Cylinder Engine Powers Full-Size Trucks – TechLink         This is an internet myth going around.  It was alleged that some 5.3s had this mystical 8th digit of the VIN as an "E" which somehow meant it had a new one year only 5.3 that didn't have DFM.  The writer of said article and the person that made the claim conveniently can't count because they posted the VIN.  The 8th digit was a "D" which meant its still the 5.3 with DFM.  The 9th digit of the VIN was an "E" and the 9th digit isn't the engine code.  At all.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...