Jump to content

Proximity entry unlock and lock

jack napora

Recommended Posts

jack napora New Member

jack napora

Posted
Posted

Hey, i'm new to forums. Not sure how to search for my problem..sorry if a repeat.     

I can't seem to find in the manual and running through all the vehicle settings on 2019 sierra denali.

When i approach the truck with keyfob in my hand, and push the handle button, the lights flash but nothing unlocks.   

There is an option about proximity entry: off/driver door or all doors... I have it on all doors.   

 Now the damn thing worked fine for the first 2 months...this stopped working 1 month ago.

Anyone experience this? How to fix?

Jack

Wheelguy Enthusiast

Wheelguy

Posted
Posted
3 hours ago, jack napora said:

How to fix?

Call the dealership, ask for the service department & tell the service advisor what’s wrong & ask them if they can take a look at it & possibly fix what’s wrong.

fish_guru Enthusiast

fish_guru

Posted
Posted

If you haven't already, check the settings again in the infotainment system. A system update or dealer software recall could have changed them or returned them to the default settings.

jack napora New Member

jack napora

Posted
  • Author
Posted

So i got an answer.... 

You hold the lock and unlock buttons on your fob for 3s..... Truck beeps... And proximity works again...

Strange function.... Not sure what it is about....

I'm just really happy its fixed....

Wheelguy Enthusiast

Wheelguy

Posted
Posted
6 hours ago, jack napora said:

So i got an answer.... 

You hold the lock and unlock buttons on your fob for 3s..... Truck beeps... And proximity works again...

Strange function.... Not sure what it is about....

I'm just really happy its fixed....

Thank you for the update.  Out of curiosity, from where did that solution come?

Wheelguy Enthusiast

Wheelguy

Posted
Posted
34 minutes ago, jack napora said:

A guy on a facebook group told me same thing happened to him...

Thanks, Jack.

killramos Enthusiast

killramos

Posted
Posted
On 9/11/2019 at 7:53 AM, jack napora said:

So i got an answer.... 

You hold the lock and unlock buttons on your fob for 3s..... Truck beeps... And proximity works again...

Strange function.... Not sure what it is about....

I'm just really happy its fixed....

This is to prevent a thief from being able to steal your truck with a repeater.

 

Method works by using a piece of hardware With a Substantial signal boost that picks up the transponder signal from your key, say from inside your home, and retransmits it to the truck allowing the thief to drive it away.

 

Disabling the passive transmission from the fob (which OP did accidentally) prevents this from happening. But obviously means it won’t work when you walk up to the truck.

 

Another option to avoid this technique is store your fob in a faraway bag to block the signal. Honestly though, this is something being employed by determined criminals.

  • 8 months later...

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • scotthvac.net
      2022-24 halogen - led grille swap

      By scotthvac.net · Posted

      2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • davester
      Replacement Radiator

      By davester · Posted

      And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
    • davester
      Turning radius

      By davester · Posted

      Just don't turn the steering wheel as much?
    • Snowcamo
      Replacement Radiator

      By Snowcamo · Posted

      Rockauto bud. I pass local stores for parts.   Findya something online. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...