Jump to content

Recommended Posts

Posted
2 hours ago, 19ShadowCustom said:

nice truck, but this is T1 forum.

Ok can you clarify T1?  Kind of new to the Chev/my world 

Posted

There are several names for this color on lots of different vehicles.  Regardless the color code if GJI.  I have searched high and low to find a powder coat that would match but to no avail.  I really want to color my chrome bumpers.  The local bedliner shop that does kevlar spray said they could color match kevlar.  Its kinda cool, and would be tough as nails on a bumper.  Its a little rougher than I like though.

Posted
18 hours ago, maillet282 said:

Ok can you clarify T1?  Kind of new to the Chev/my world 

Refers to the internal designation for the new generation/new body style that started in 2019.  There were also 2019 double cabs in the old body style during the change-over process. 

Your 2017 is a K2

 

Before that there was GMT900,

before that the GMT800 (which was the first ones to use the hydroformed front rails in the frame)

Before that, different frame supplier and the 400 series....

 

Fwiw, GM refers to paint colours by the order code. (RPO code)

Sometimes chev and gmc (and the other divisions) will use the same paint colour, and same rpo code, but label it with a different name.

It's common for the shade of the colour to change every few years, and some colours are one year or part year colours.

In any case, correct colour matching is done by the RPO code (order code). Pictures often 

 

 

GMC calls   GJI  Dark Sky Metallic    
Chev calls GJI  Shadow Gray Metallic

So this thread could have been called Dark Sky Metallic / Shadow Gray Metallic

GJI wasn't available on 2017.  

 

 

Is yours 'Graphite Metallic'?

If so, it's RPO code is GPA.  (GMC called GPA Dark Slate Metallic) 

It's no longer available. 

 

The 2017 should have the label in the glove box that lists the RPO codes.  They have moved the info to a QR code on the door post --- that can be read using a phone app.  Of course any dealer (or gm chat / social media) can also run the vin and get a list of 'as built' codes. 

 

  • Like 2
  • 8 months later...
Posted

My dark sky Denali. First saw it on the lot the way the salesman said it was blue and the way the sun hit the color I almost walked back in and said there’s a gray one out there but I don’t see a blue one

4CF6CA7B-7681-46CB-B7F1-35F56392A0B8.jpeg

  • 2 weeks later...
Posted
9 minutes ago, Tjeli said:

IMG_4023.thumb.JPEG.0d05cc2ac3a0b91198ef745ecf00f5e5.JPEG

Damn, forgot how good looking these are, I need to go out and wash mine so it looks this good again!

  • 2 weeks later...
Posted (edited)

First post, 2020 LT Trail Boss is the best color SGM. 
S/F

Adam

876C451F-9D15-4415-B635-20D4E82D2EC3.jpeg

Edited by ACM0302
Misspelling
  • 1 year later...
Posted

Not the best picture, but I found some AT4 wheels local and swapped out my RST 20s. Much better, but the Duratrac tires are going to have to go.

20221005_191319.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I'm the original poster of this thread; I'm 85,000 miles now with no transmission issues after they did the fluid change without filter at 45,000.  I plan on a fluid change AND filter in another 5,000 miles and agree with you on staying to witness what happens if possible.  Ideally I would have done the filter at 45,000 too, but my original dealer was incompetent.  I've since moved on and get service done by another more reputable dealer, so I'm hopeful they follow the correct procedure at 90,000.  
    • Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...