Jump to content

Recommended Posts

Posted
On 7/1/2022 at 9:35 AM, GMCustomerService said:

This is certainly not what we like to hear, KC Desert.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2020 GMC 2500HD AT4. To do so, please send an email to [email protected] with ATTN: KC Desert/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com

 

 

Your response is interesting.  Mine went in twice for making the high pitch sound and both times they said it is "Working as Designed".

 

They would not replace the pads.  Mind you this is the same dealership that, after paying for oil change services, never put grease in the 9 fittings.  I had to have another shop do that.  Drove over 20k miles without apparently no grease in the fittings from the factory (new).  Now with the repeated P0106 error at 38k miles and replacing the MAS sensor and still comes back on every 5 days, I am wondering if I truly own a lemon.  Especially with the $135 diagnostic fee I paid when it was under 36k miles for them to tell me that the trailing brakes going in and out is a "Problem, but best of luck." - which is still a problem.

 

  • 2 weeks later...
Posted

So much like everyone else had the first set replaced at 8700 miles now i can start to hear a squeak again less than 1k later... anyone got aftermarket that works? If not ive been a GM guy forever but I WONT hesitate to make it my last. Ill trade it in fast for a 90s model GMT400. I got 2 of them with Duralast brakes that don't squeak for god sakes 

  • 3 weeks later...
Posted

On a 3500 drw, a trick that has worked for me, was to remove the pads and grind a 45 degree bevel, about 1/4 inch wide on the outside edge of the pads. It is that 90 degree angle where the pad hits the rotor that creates the squeal, the squeal will be gone until the pads wear the bevel away, then repeat the mod or replace pads.

  • Like 1
Posted
On 7/13/2022 at 11:58 PM, DonYukon said:

So much like everyone else had the first set replaced at 8700 miles now i can start to hear a squeak again less than 1k later... anyone got aftermarket that works? If not ive been a GM guy forever but I WONT hesitate to make it my last. Ill trade it in fast for a 90s model GMT400. I got 2 of them with Duralast brakes that don't squeak for god sakes 

This is certainly not what we like to hear, DonYukon.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2020 Silverado. To do so, please send an email to [email protected] with ATTN: DonYukon/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

  • Like 1
  • 1 month later...
Posted

GM has told me since they replaced my brakes twice now and it is squealing again, they will NOT fix it again. 

Posted

I had the same issue with my 2020 HD. Dealership replaced mine around 32K and after a couple hundred miles it started doing the same thing. Recently the dealership contacted me and said there is now a new part number for the pads and they replaced them again. At this point I had about 48K miles on them and I was willing to pay for them to be replaced but they took care of it. Happy to say I have driven about 3K miles now with no squeaks.

Posted
1 hour ago, Dwayne Pierce said:

I had the same issue with my 2020 HD. Dealership replaced mine around 32K and after a couple hundred miles it started doing the same thing. Recently the dealership contacted me and said there is now a new part number for the pads and they replaced them again. At this point I had about 48K miles on them and I was willing to pay for them to be replaced but they took care of it. Happy to say I have driven about 3K miles now with no squeaks.

Do you have the updated part number? 

Posted
5 hours ago, Mic_ said:

followign for new part number

 

I looked at the invoice and it is written.

1   85149489  (S) PAD KIT

1   86788820 PAD KIT

 

Not sure if this is what your looking for.
I would assume any GM  dealer in the know would be able to pull the new part numbers. Good Luck 
 

Posted (edited)

Thanks @Dwayne Pierce . Is there a new TSB # I can share with my dealer? They seem like they are not interested in looking anything up. 

Edited by KC Desert
Posted
On 10/6/2022 at 12:47 PM, KC Desert said:

Thanks @Dwayne Pierce . Is there a new TSB # I can share with my dealer? They seem like they are not interested in looking anything up. 

Sorry man, I got busy and forgot to get back over here.

  • 3 weeks later...
Posted

I submitted the repair request (My 3rd one I think, maybe 4th now) and GM said sorry I am now out of warranty and refused to cover it with the dealer. Mind you, they have already replaced my brakes MULTIPLE times under warranty following each TSB and update and it did not solve the issue. This new find is the last chance and they say, sorry, we know your brakes are still 98% but we are not covering it. I have had enough of GM. First my Front Differential blows up TWO times and brakes have multiple fixes and still suck and I am told to just deal with it? I don’t think so bozos. 

Posted

So now you'll jump ship over a $100 set of pads?

 

Seems cheaper to do that than replace the truck. Get mad all you want at GM for not doing more but the cheap fix is still an option.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • When I had a Bumper subscription for a few days when I needed to run title histories on cars I was looking at, I decided to look up a few of my old/past vehicles.   My 2015 Silverado was still actively registered and it last sold in 2024 with 160k on the clock. No idea if that's on the original engine but someone's keeping it on the road or the original AFM stuff is still going.   It used 0w20. I remember feeding it Mobil 0w20 AFE for the first 30k of its life on <5k OCI's.
    • I can't say I have ever heard of someone getting that type of mileage out of a set of tires even though they rotated on a regular basis but without a doubt if the front end gets wear and those tires are no longer able to track straight it scrubs them off, and driving style and road surface make a huge difference as well.    However that is not what prompted me to comment as it was the new tire theme of sitting in storage waiting to be used scenario. I am sure some tires can last for quite a while in storage if its not too warm and out of the sunlight but unfortunately some tires the way they their rubber compound is formulated they can age and dry out even in a reasonably decent storage location. My brother ran into this maybe three years ago when he was looking at the tires that were on his dually truck and a combination of wear on the rear ones and noticing that the front tires had some cracks around the sidewall of the tire not far from the bead but he had replaced only the front ones not long ago with 2 of the remaining 6 he had left from the initial two sets of takeoffs he had all bought at the same time .... 10 years ago ! ( the years fly by, a truck that only gets used a bit to haul a camper during the summer and sits in a shed for a large part of the year ). That second set of 6 tires, two he had put on the front prior like I said and they had very little wear but those cracks were now present. So we go into the shed where the other 4 tires had been stored all this time and every one of them had the same cracks in the sidewalls and so in the end it amounted to throwing away 6 brand new but 10 year old takeoff tires into the dump that he got a deal on at a tire shop because they aged out. They were a Ford factory equipment BFG tire and those tires did not age well compared to some tires I've seen far older then that and did not show that type of aging. True, they always say up here anyway that 7 years is sort of a limit for age by rights, we don't have the intense prolonged heat that many of you have down in the states that just cook tires and depends on where the vehicle sits when not in use. GB, another words maybe had you bought a set of tires to store it would have been fine as long as you used them up fast enough but there are no guarantees when it comes to rubber, tires or of that other type stored in some guys wallets 😆
    • 2020 2500 HD...I had some trouble getting the key into the ignition switch but went in fine after applying some extra effort. Since then, the door chimes when open when the key is out of the ignition. Also, when I lock the doors with the switch on the arm rest, the driver door locks but then unlocks. (I can lock everything fine with the fob) The message on the little screen displays the "Engine Hours"...kinda weird.   I'm guessing something happened to the ignition switch and it thinks the key is still in there. I unplugged the batteries for 20 minutes, no change. There are a number of videos on YouTube but nothing I can find that address this specific issue. Ideas appreciated, thank you.
    • Based on what I can tell, yes.   As for updating it, its a mixed bag.  Updates do fix a lot of issues, but occasionally can create some oddities.  They do more good than harm though overall.     Here's what the most current one does and a  V171 Improvements Important: Improvements will vary by model, build configuration, system, and sales region. Not all vehicles have all features. OnStar and Wi-Fi may not work after remote start CarPlay may not automatically reconnect Part of the Driver Attention messaging screen may be in English even though the language is set to something else XM may not work After a dead 12V the radio may set to Arabic at each startup Bluetooth contacts might not be able to sync with the vehicle During an OTA the 12V battery may drain Customer might see a screen telling them to return to the dealer After changing the Wi-Fi SSID or password a device may not disconnect If a device is connected on the 2.4Ghz band, nothing will connect to the 5Ghz one, which could show as slow Wi-Fi speeds Customers might have noticed Wi-Fi dropping in certain areas and reconnecting later Customer might see the top of the screen blinking during Android Auto Android Auto may not connect CarPlay audio might momentarily cut out The "Add Phone" button may be grayed out The radio may not start up   V167 Most Notable Improvements:   Outside Air Temperature is incorrect. -You may see a popup message for Engine Shift. (Corvette Only) After changing the exhaust sound they get a popup that "mode change not applied", even though it was. -When changing volume, the volume bar is for Traffic instead of Audio. -(Corvette Only) Improvements to the placement of buttons and text. -If the customer receives the message "Apple CarPlay Could not connect", the cursor might move in the opposite direction than expected when using the control knob. -Android Auto automatically starts playing their music, even though they have turned that off in settings. -Intermittently they have a red OnStar LED with no OnStar function and/or no audio. -The minimum length of the Wi-Fi password was increased to 12 characters. -The popup message "Driver Attention Check, check your mirrors or Super Cruise will shut down" may not have come up on the display when it should have. -Startup animation added for 20th anniversary of the V-Series on Cadillacs. -The Navigation app received location improvements when going under long underpasses. -In the Navigation app there are filters for charging points that the vehicle cannot use.   V164 Most Notable Improvements Most notable improvements contained in this release may include: Apps Intermittently, an “SD Card Removed” message will pop up in the Navigation app. While in the audio app, the radio may stop working. Trailer Tire Pressure sensors may not be learned in the Trailer app. Not being able to return to the home screen while in the Camera app. After an ignition cycle, the radio might go to a black screen or stop working if using Sirius XM. Spotify icon truncated on Audio app.   SXM When changing power modes with the ignition switch, the HVAC pop up might appear. During startup, the radio will show the brand splash screen then go blank. Receiving a confirmation pop-up when changing drive modes. A “Return to Dealer” message may appear on the radio screen. SuperCruise setting toggle may not work. System After an ignition cycle, the radio might go black or stop working if using Sirius XM (SXM). Settings When performing a factory reset, the radio may stop working. After performing a factory reset, the radio may stop working when trying to switch users. When trying to go into the Language section quickly after startup, the radio may stop working. Projection Wireless CarPlay cannot be connected after unpairing another wireless Android Auto device. When the Android Auto screen comes up to connect wirelessly, the screen may freeze if the Cancel button is pressed. Removed the Apple CarPlay Cannot Connect screen when a device fails to pair during the autoconnect process. CarPlay information may not show up in the audio app. Near Field Communications (NFC) chime may be heard when NFC does not work. The Cannot Connect screen does not pop up after the first connection on wireless CarPlay fails. Apple CarPlay is now functional in Guam. Over the Air (OTA) When a software update is cancelled, the downloading logo may still be displayed. Energy When using the Energy app, the radio may stop working. When plugging in the vehicle, the display might show “Now” instead of “Charging Upon Plug In.” Instrument Cluster Voice recognition can be started while on an OnStar or phone call. When downloading contacts, there is a progress bar and circles on the Recents page of the cluster. The temperature on the cluster and the display may be different. After receiving and ending a call on the secondary paired phone, the cluster may get stuck on the phone menu. Bluetooth Intermittent Bluetooth connection loss.
    • Looking for help troubleshooting a metallic like front end rattle. Figured I’d see if anyone had thoughts before I schedule an appointment with the dealer.   The rattle is fairly loud and occurs primarily when the front driver side wheel hits a bump, even fairly minor road seams. Sometimes does it when the passenger hits a bump but I don’t believe when the rear hits. Rattle still occurs when foot is pressing brake peddle so I think that rules out the caliper rattle I’ve read about. I’ve also checked the running boards and they are tight.   Most noticeable at slow speeds.    Any insight is appreciated. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...