Jump to content

Dash Cameras

kodiakdenali
 Share

Recommended Posts

kodiakdenali Enthusiast

kodiakdenali

Posted
Posted

Kind of a generic automotive question here, but looking for recommendations for a good dash camera. Considering it's a critical safety feature these days.

I have 2 so far, but I am not happy with either. the first is a Rexing brand, and its great...when it works. the problem is that isn't all that often. sitting in the windshield it seems to overheat in any temperature over 60 degrees if the sun is out, it will lock up even before it finishes displaying the splash screen. when you can get it to work its a great camera, but overall its terrible. I got a second one for my truck and this time spent 4x as much on one that was very highly rated, top on most lists actually. the Nextbase 622GW. 4k which is great as I've found at 1080 like the Rexing you can't read a plate unless you are really close to it. but to my dismay this one also is far less than perfect. better than my first camera for sure, but it also locks up often. I look over at it periodically and frequently see the lights not blinking and the display frozen and buttons not responding.

 

has anyone purchased a dash cam that offers good features and high quality images that actually works?

 

I have no idea why all these manufacturers can't build a camera that actually works when you need it. and both suffer from the same problem, frequent lock ups. you would think any engineer designing a product like this would know to incorporate a watchdog timer (software at least, hardware far better) which would automatically reset the camera should it freeze, yet 2 in a row, one a $400 product, it doesn't make me feel Iike I'm protected out there.

btj_z71 Enthusiast

btj_z71

Posted
Posted
18 minutes ago, kodiakdenali said:

Kind of a generic automotive question here, but looking for recommendations for a good dash camera. Considering it's a critical safety feature these days.

I have 2 so far, but I am not happy with either. the first is a Rexing brand, and its great...when it works. the problem is that isn't all that often. sitting in the windshield it seems to overheat in any temperature over 60 degrees if the sun is out, it will lock up even before it finishes displaying the splash screen. when you can get it to work its a great camera, but overall its terrible. I got a second one for my truck and this time spent 4x as much on one that was very highly rated, top on most lists actually. the Nextbase 622GW. 4k which is great as I've found at 1080 like the Rexing you can't read a plate unless you are really close to it. but to my dismay this one also is far less than perfect. better than my first camera for sure, but it also locks up often. I look over at it periodically and frequently see the lights not blinking and the display frozen and buttons not responding.

 

has anyone purchased a dash cam that offers good features and high quality images that actually works?

 

I have no idea why all these manufacturers can't build a camera that actually works when you need it. and both suffer from the same problem, frequent lock ups. you would think any engineer designing a product like this would know to incorporate a watchdog timer (software at least, hardware far better) which would automatically reset the camera should it freeze, yet 2 in a row, one a $400 product, it doesn't make me feel Iike I'm protected out there.

I've used Cobra in the past.  Never had any problems with heat in here in the south.   They are fair priced too for what you get.

newdude Senior Enthusiast

newdude

Posted
Posted (edited)

I have this:  Thinkware F800PRO 1080P WiFi GPS | Dash Cam | Thinkware USA

 

Mine is a front and rear bundle and OBD port for power.  

 

The only issues I ran into were created by myself.  I had messed up a setting in my phone which caused the app for the camera to not pair correctly to it.  The only other gripes is wind noise and its only 1080p.  I put a piece of foam over the speaker hole but I think its wind noise from the camera body.  

 

They make a 2K Thinkware Q800PRO 2K WiFi | Dash Cam | Thinkware USA  and  a 4K camera as well Thinkware U1000 4K WiFi GPS | Dash Cam | Thinkware USA

 

 

Edited by newdude
jnissen Enthusiast

jnissen

Posted
Posted

I design automotive chips and can tell you designing for high automotive temperature ranges is very difficult. The problem with most of these systems is they use commercial flash memory for storage. If it works at 75C your lucky. Compare that to a dedicated automotive memory they still work at 175C. The cheap Chinese manufactured ones will struggle unless they have a really good screening and test program to find the weak parts.

Rob Mugs Enthusiast

Rob Mugs

Posted
Posted

Kind of shocked by the off the shelf answers.

Viofo is great as long as you only want forward facing.  The rear camera is a dud.  I've tried everything outside of putting a Faraday cage around it and the cables.... it blocks things like TPMS and the keyfob.  Front camera works perfectly but would suggest adding the polarized filter

 

BlackVue also makes a decent unit but I can only go by hearsay

Wiggums Senior Enthusiast

Wiggums

Posted
Posted

I'd love to see an optional built-in cam, I'd even spend $500 for it and not worry about it. I've seen some fall off windows during warm days. I've seen some have SD card issues.

Jim E Enthusiast

Jim E

Posted
Posted

I've been researching a cam as well.  Haven't used one until now, so I've been trying to learn as much as possible.  So far, I've narrowed my list down to two so far.  A cheaper 1080P model, the Street Guardian SGGCX2PRO+ (  https://smile.amazon.com/dp/B07GV4DHYM/?coliid=I3T1CMX1QZSYQ6&colid=5JOFUPAEZFQ0&psc=1&ref_=lv_ov_lig_dp_it ) or a pricier 4k model, the ThinkWare U1000 ( https://smile.amazon.com/dp/B07XD6FLSY/?coliid=IUFS08WW3Z19M&colid=5JOFUPAEZFQ0&psc=1&ref_=lv_ov_lig_dp_it ).  My biggest concern so far, was mountability.  I don't like sticking stuff to the glass.  I've never had anything stay mounted properly, and reliably, long term, that is just stuck to the glass.  I was hoping for something that would mount similar to, or with a radar detector.

Rob Mugs Enthusiast

Rob Mugs

Posted
Posted
10 hours ago, Wiggums said:

I'd love to see an optional built-in cam, I'd even spend $500 for it and not worry about it. I've seen some fall off windows during warm days. I've seen some have SD card issues.

How do you think it'd be stored with a built-in?  Suppose you could use a full size SSD but if you're talking about a good 4K camera front and back, 500 isn't a stretch for one you stick on your windshield.  

 

Just be sure to get an SD card designed for the temps and lots of read/write

Wiggums Senior Enthusiast

Wiggums

Posted
Posted
On 3/11/2021 at 7:36 AM, Rob Mugs said:

How do you think it'd be stored with a built-in?  Suppose you could use a full size SSD but if you're talking about a good 4K camera front and back, 500 isn't a stretch for one you stick on your windshield.  

 

Just be sure to get an SD card designed for the temps and lots of read/write

An ideal one would be able to stay on while the vehicle is parked, drawing little power and watching it at nights. Something that's permanently wired and not hanging from my front window like an aftermarket. Maybe a small one under the mirror? It can be done.

Wiggums Senior Enthusiast

Wiggums

Posted
Posted
On 3/11/2021 at 9:39 AM, redwngr said:

GM accessories sells Thinkware cams.

 

https://accessories.gmc.com/search?year=2021&make=GMC&model=Sierra 1500&modelId=548&body=Crew Cab Pickup&bodyId=22&wheel=Standard Box&wheelId=652&trim=Denali&trimId=577&drive=4WD&driveId=8&engine=3.0L L6 DIESEL&engineId=17881&bodyNumDoors=5&categoryId=98064

It's not made for GM. I want something that is permanent, like in front of the rearview mirror and embedded in the walls, not hanging out like an aftermarket.

redwngr Senior Enthusiast

redwngr

Posted
Posted (edited)
46 minutes ago, Wiggums said:

It's not made for GM. I want something that is permanent, like in front of the rearview mirror and embedded in the walls, not hanging out like an aftermarket.

Yes, they are available other places, but thought that GM selling them thru accessories might indicate that they should survive in the cab environment.

The ones available thru gm aren't the top of the line that thinkware offers. 

 

Perhaps a 'built-for-gm version' after the MCE expected for the 2022's.

Edited by redwngr
pixelmonkey380 Enthusiast

pixelmonkey380

Posted
Posted (edited)

using a AUKEY in mine... and use the same model in all my cars.

link to it on amazon

https://www.amazon.com/gp/product/B075S7W6FR/ref=ox_sc_saved_title_9?smid=A1GB2I3NQT9NQC&psc=1

 

I have the cable under the headliner and down the A pillar on the passengers side, before feeding the cable behind the bottom edge of the dash and routing the cable to the glovebox USB.

I would recommend getting a 90 degree connector, as the cable that comes with the camera will get a little "kinked" when closing the glove box otherwise.

link to the 90 deg cable connection

https://www.amazon.com/gp/product/B084WPG7QG/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1

 

Front camera WILL need a filter. The viofo clips onto the AUKEY perfectly!

link to the filter on amazon

https://www.amazon.com/gp/product/B01N0KVD4C/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

 

Standard memory cards will last one summer parked outside.

"High Endurance" cards will get a couple of years.

link to the card on amazon

https://www.amazon.com/SanDisk-Endurance-microSDXC-Adapter-Monitoring/dp/B07NY23WBG/ref=pd_bxgy_img_2/140-3681450-1512527?_encoding=UTF8&pd_rd_i=B07NY23WBG&pd_rd_r=93c2560a-c581-4313-9e83-56afe89b7352&pd_rd_w=u067F&pd_rd_wg=1uIsf&pf_rd_p=f325d01c-4658-4593-be83-3e12ca663f0e&pf_rd_r=NX8GAGXT7P71EWQHXYJR&psc=1&refRID=NX8GAGXT7P71EWQHXYJR

 

in the last 3 years these cameras have saved 10 times what ive paid for them in different events that have happened. *"they rear ended me officer!" and then i share the footage that shows they backed into me*

 

good investment

 

*NOTE:  if anyone is interested, I can snap a few photos and video tomorrow to share*

 

Thread with photos and video from the camera installed. <--- Click

Edited by pixelmonkey380
addition of request for photos and video

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • davester
      Bench seat swap for 2021-2024 suburban

      By davester · Posted

      probably won't get a response from that user, as they haven't returned to the site since making that one post.  users don't (at least I don't, and I haven't seen any setting which would notify me via say, email) get any notification other than going to this site, and checking if they got a response on their thread...
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Thanks - I wasn't quite caffeinated this morning. 2:1 makes sense, turning the crankshaft 360 degrees will turn the cam 180 degrees, and had I done that, the cam's dot would be at 6 and the crank's at 12 again.   I went ahead and took the sprocket off anyway, aligned everything dot-to-dot including the balance shaft just for s&g. I'm glad I did because I discovered no Loctite on the timing sprocket bolts. Maybe it's not required, but at only 20 ft-lb torque spec, those bolts aren't in there very tight. Cleaned and reassembled with some thread locker and torqued.   A general observation: Less is more with RTV. If a little doesn't stop a leak, a LOT probably won't, either. RTV is thinly veiled revenge, in a tube...      
    • richard wysong
      Wow I'm in a pickle. (Broke down truck) and a story.

      By richard wysong · Posted

      The timing marks are ok, that is #1, you can turn it over until they line up and it won't change anything, the crankshaft turns twice for every camshaft revolution, I have always set up SB Chevs as your pic shows using a straight edge
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Someone's been here before.... There is a receipt for a 3-piece timing set, purchased earlier this year.   Is this picture something, or, nothing?   I have the timing cover off and my crank is perfectly TDC and the keyed gear's locating mark is dead on 12 o'clock.   The cam gear locating mark is also at 12 o'clock. Now, I'm not an expert, but all the install guides say the two locating marks should meet and be perfectly aligned when installing a timing set. The mark on the crank should be dead on 12:00 and the cam gear's mark should be dead on 6:00, and both marks should be perfectly vertically aligned.   I believe the timing gear is keyed or has a dowel that ensures it can only be installed on the cam in one position, so I have to believe the cam is out of phase somehow. At the very least, with a triangular bolt pattern, it can only be installed in one of 3 different positions.   Before I pulled the front cover, the truck was running alright, no service engine soon lights except an occasional P0172 / rich condition. Timing -16 timing at idle (should be +16), and total -35% fuel trim, two conditions I haven't been able to figure out.   In related news, my injector tested pretty well, wasn't leaking, but I had it rebuilt anyway, and it's on it's way back to me.         Along with this discovery, the good and bad:   Good: The oil pan seal appears undamaged.   Bad: -The timing cover has been reused, and the positioning dowels have been broken. That could explain some of the leaking. -Some kind of white paste or grease was used to try to seal the oil pan seal and timing cover (since wiped off..). -Then, someone globbed silicone all over the front of the cover and also buried the ckp sensor in it. But, they didn't put any inside the cover or use RTV to try to seal the oil pan seal with the timing cover (good).
    • Grumpy Bear
      PF63 Oil Filters Going Away?

      By Grumpy Bear · Posted

      The guy that owns K&P filters last I checked in with him has over 300,000 miles on his Dodge base Hemi using his own 35 micron absolute stainless mesh filter from its first oil change.    The GM study I've posted a dozen times shows the relationship in engine life based in multiples of base units, not miles or years. That is the base unit is the number of miles the motor ran using the reference filter efficiency.    The above two paragraphs dismantle anecdotal arguments IF one changes oil often enough to prevent particle formation and the motor is in otherwise good shape. That is not full of silica (no air filter) or suffering a metallurgical issue that is not part of the lubrication discussion. Poor heat treat in example.   Data from UOA's I've reviewed from more than a few engines can show remarkably broad variations in oil cleanliness using the exact same filter over the course of an engines life.     Lastly there is the common sense of it. Wear debris WILL circulate the engine BEFORE it ever sees a filter in route to that filter and WILL harm the pump which NEVER sees filtered oil.    Alpha question then becomes, given the facts, how long do you believe is a reasonable service life from a vehicle you are certain you will not pass down? That is the junk yard will be it's resting place when you're done with it? (the moral issue most don't care about).    Omega question is then how diligent are you prepared to be in general mechanical, air & oil maintenance? Preventing particulates and keeping them sufficiently dilute; preventing the precursors from generation, amalgamation and precipitation.    If I get a good look at the engine bay of a vehicle I have a fair idea of the owners commitment to the inside of the power train. That 30 micron WIX is still more efficient than a sieve.                 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...