Sign up for FREE! Become a GM-Trucks.com Member Today!
In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience.
By Mitch Wyndham
Hey everyone, couldn't find a thread for WTB/WTS but I am looking to replace my center console tray out of my 2011 Sierra All Terrain. It came with the brushed aluminum one that have the cover flaps thats open/close. Part #23164630. If anyone has one in good condition for sale let me know. Im based in Ontario but can send a shipping label and use paypal for payment. Attached a picture so theres no confusion! Thanks so much.
So up until yesterday the truck was driving relatively smoothly, there was the occasional hard shift from 1st to 2nd (which I believe these trucks are known for). I stopped at a stop light yesterday and started going and then at about 20 MPH the truck decided it didnt want to shift. This happened a few times throughout the day and seemed to get worse as the day went on and at this point it now does it every time it gets down into the lower gears. I switched to manual to see what gear it was stuck in and it showed 2nd and then 3rd after it shifted and didnt want to shift up.
EDIT: Transmission temps when I was looking did not appear to get above 205 F, Fluid is red like it should be, level seems fine.
Is there a known issue with these transmissions or an easy fix I can attempt? Transmissions are voodoo to me
By Brittney Trefry
Hi everyone, first time posting, but long time reader. I usually try to avoid posting when I can, and just browse the threads and read about related problems and figure it out from there. Even though I've found many threads that are similar to the problem Im having, I still can't narrow it down to my next step. so if anyone can help, it would be greatly appreciated.
Ok so, BAD oil leak problem with my friends 2005 GMC Sierra 1500. It's had this leak for a while, but it's gotten to the point now where it's starting to leave puddles. I power washed the entire area, and I actually got it pretty clean. Today when I looked again to see if I could trace the source, I had a much clearer picture of where the leaks are actually coming from. From what I've read it seems as though it could be the valve cover gasket, the crankshaft sensor, the rear main seal, or even the oil pan gasket. My problem is that to me, it looks like it's coming from almost all these places. I looked inside the bell housing and I don't see it looking completely soaked in oil. It does however, look like the leak is mainly coming from in front of the bell housing behind the engine, in between the two. I'll attach some pictures. These would be from overnight after I power washed it, so the oil hasn't blown anywhere from being driven or anything. Thanks so much to anyone who's got any ideas!
Alright so my 2006 GMC Sierra was stolen, they stripped my led head lights tail lights 22inch wheels cluster etc. .. I got it back and running but the cluster I replaced mine with was from a Silverado now as I drive the abs lights come on and it says SERVICE BRAKE BOOSTER etc battery light is constantly on when I drive it .. would this be because the cluster I have is not meant for my Sierra ?? Any info helps thanks guys !
By David Ottenbacher
Hello, for the past two years my truck (2015 Sierra 1500 All Terrain) has been intermittently flashing service lights saying the to service ABS, to service stabillitrac, and to service parking sensors. This would happen a few times a month and would immediately go away and I would think that it was just an annoying bug. But since about a month ago, when making low speed left turns, as well as any size bump, caused it to happen. This worsens into ABS light and stabillitrac light on for one day. While this happened you could feel the ABS pumping at when braking normally. This too went away the next day. I took the truck to the dealer for a diagnostic and told them all of this as well. After the $190 diagnosis they said it was the following codes (attached photo)
C0035-04, C0040-04, and C0035-0F.
they told me both front hubs were bad and needed replacement. They wanted $1800 for parts and labor. I told them thank you and paid the diagnosis and took the truck home. After the dealer the trucks electronics and 10x worse. Now the ABS and Stabillitrac lights stay on permanently, the brake light dings and flashes with any turn of the steering wheel. Also getting constant service ABS, service trailer brakes, Service stabillitrac, and reduced steering assist. I bought both front hubs and wheel speed sensors. I installed them and torqued everything back to spec. After reconnecting the battery and taking a test drive nothing had changed. I took the top panel from the dash off and did the ground mods. Again, no change. I’m going crazy trying to find the problem. I the. Took the truck to autozone for a code read. It still says the same three codes and it did, even after replacing the parts and sensors the dealer said would work. If anyone knows what the cause is it would be much appreciated. Thanks in advance, Dave
Recently Browsing 0 members
- No registered users viewing this page.
Who's Online 41 Members, 0 Anonymous, 1,401 Guests (See full list)
- Ryan L
- Nick Kendall
- Kevin Monaghan
- LBI Coach Dave
- nanil zahid
- Salsa De Piña
- don guilmette
- Race Neely
- Jimmy Wells