2014+ Leveling Kits

Buckeye920 · March 30, 2015

Well I ordered at set of Master Craft Courser AXT in 285/70 17 to see if they will fit... I got them for super cheap. Hopefully they will fit.

Texas Husker · March 30, 2015

Got them on today, they look great will post pics later. a very slight rub on the wheel well on the backside middle of the front tire, very minor trimming will fix it, theres no rub on the front fender side. tires stick out almost an inch outside fenders

Good to hear. Is it the liner only that rubs? I was hoping to stick with the stock rims and a small spacer but it sounds like that may not be enough. Maybe a 1.5 body lift will help. Hmmm... looks great thougb, but need more pics [emoji106] [emoji106]

txhunter21 · March 31, 2015

Good to hear. Is it the liner only that rubs? I was hoping to stick with the stock rims and a small spacer but it sounds like that may not be enough. Maybe a 1.5 body lift will help. Hmmm... looks great thougb, but need more pics [emoji106] [emoji106]

yes the backside of the liner rubs but i cut that out with a razor blade and it doesn't rub now. and yes you will need an offset , it won't fit with stock rims ur front end will need to come up at least 2"

txhunter21 · March 31, 2015

side view, will take more tmw

Texas Husker · March 31, 2015

side view, will take more tmw

Very nice![emoji106]

txhunter21 · March 31, 2015

Very nice![emoji106]

Thanks, they aren't lying when they said these are 34.25" tires, up close they are very big and they wouldn't fit an older model without a 4" lift

14x4 · March 31, 2015

yes the backside of the liner rubs but i cut that out with a razor blade and it doesn't rub now. and yes you will need an offset , it won't fit with stock rims ur front end will need to come up at least 2"

295/70r18 won't fit on stock wheels? What do you mean come up 2 inches in front? As in a level? Or are you talking offset?

tanner709 · March 31, 2015

Diameter wise 295/70/17 will likely be fine it will be offset that will be the question. 295/70/17 is roughly 33.3-33.5"x12ishx17. Again like most 33-34" tires the thickness will be the issue. I suggest +12-0-12 offset.

I think AZ has his 295/55/20s not rubbing with +19 offset on fuel Mavericks. I've since switched my choice to method mesh at 0 offset. Should he good to go on either 285/70/17 or 295/70/17

Yeah you're spot on with the offset for that size tire. 295/70/17 has been done on here, with KMC addicts (+18?)

AZ has 295/55/20 on fuel mavericks with +1 offset. You will be fine with 295/70/17 on 0 offset

tanner709 · March 31, 2015

295/70r18 won't fit on stock wheels? What do you mean come up 2 inches in front? As in a level? Or are you talking offset?

stock offset and that size will rub UCA/sway bar. This has been a pretty common topic on the debate of 295/70 in a 17" vs 18" wheel.

I'd really like to go that size in an 18" wheel if I could confirm offset. But then again - every tire is manufactured at a slightly different spec as well. frustation kicking in lol

14BlackSilverado · March 31, 2015

Will a 285/65/18 on stock rim rub with a 2 inch level? There has to be someone on here that has done that??

14x4 · March 31, 2015

stock offset and that size will rub UCA/sway bar. This has been a pretty common topic on the debate of 295/70 in a 17" vs 18" wheel.

I'd really like to go that size in an 18" wheel if I could confirm offset. But then again - every tire is manufactured at a slightly different spec as well. frustation kicking in lol

That's weird. Gmccoop is running 35x12.5 on factory 18's (with a 3" level) and allegedly isn't rubbing the uca or sway bar. A 295/70r18 isn't any bigger.

What leveling kit and what are your rubber's width etc?

3" fabtech and I'm running 35.12.50.18 BFG All Terrain KO2s

Sent from my iPhone using Tapatalk

txhunter21 · March 31, 2015

295/70r18 won't fit on stock wheels? What do you mean come up 2 inches in front? As in a level? Or are you talking offset?

stock offset and that size will rub UCA/sway bar. This has been a pretty common topic on the debate of 295/70 in a 17" vs 18" wheel.

I'd really like to go that size in an 18" wheel if I could confirm offset. But then again - every tire is manufactured at a slightly different spec as well. frustation kicking in lol

Tanner you're correct it sometimes depends on the tire and the how thick it is. The guy told me that if i went above anything more than +6 offset that my tires would rub the sway bar and i believe it. and yes at least 2" up front to clear 33's and the picture above hes running a 3" but i still dk how he doesnt rub unless the tread isnt very knobby. an 0 offset is the best way to go in my opinion

jvanwinkle2 · March 31, 2015

Hey does anyone know if 295 60 20 toyo open country at 2 extreme would fit on a 14 sierra with 2 inch front level kit on stock 20s???Thanks

You will need a 2.5" level. That is what I have tire size and level. I do get a noise once in a while. Still haven't figured it out yet. But it barely rubs somewhere. Not too worried about it. No marks that I have found yet.

Texas Husker · March 31, 2015

Tanner you're correct it sometimes depends on the tire and the how thick it is. The guy told me that if i went above anything more than +6 offset that my tires would rub the sway bar and i believe it. and yes at least 2" up front to clear 33's and the picture above hes running a 3" but i still dk how he doesnt rub unless the tread isnt very knobby. an 0 offset is the best way to go in my opinion

I've got a level in box still that needs to go on, I was hoping a 1/2"s spacer would be enough but that would put me around +18 ish. may just have to get new wheels...[emoji2] I was hoping to stick with the stockers as I like them.

tanner709 · March 31, 2015

That's weird. Gmccoop is running 35x12.5 on factory 18's (with a 3" level) and allegedly isn't rubbing the uca or sway bar. A 295/70r18 isn't any bigger.

3" fabtech and I'm running 35.12.50.18 BFG All Terrain KO2s Sent from my iPhone using Tapatalk

I know its hard to say for sure it's really trial by fire. There's a lot of people with 3" levels as well - running 35x12.5 on stock wheels with no rub ahah. Sometimes it doesn't make sense unless everyone is just saying what we want to hear.

There's a lot of factors, level, tires, offset, alignment etc. but I tend to just stick with the "gaurenteed" fitment specs for the population on here.

Edited March 31, 2015 by tanner709