Jump to content

Recommended Posts

Posted

 

 

This is pretty good info, thanks, so... of the two of you, one with 2" with still a little rake, and one with 2.5" and a little nose high, I'm pretty sure I should be good right in the middle with my 2.25" installed. Going to run 275/60R20 Toyo Open Country AT2's come next spring. Thanks for the feedback!

Yea I'd say that's fairly accurate. Should be very close to dead level. Is that what you're going for?

 

 

Sent from my iPhone using Tapatalk

Posted (edited)
My Truck with a Rough Country 2" Level. I Still have 1" of rake, anyone on the fence that wants a true level I think you need to go with the 2.5" kit.

I was a little unhappy at first based on measurements, but I don't think it's that noticable and I think it looks pretty good. Hopefully once I get some new tires and rims it will beef it up a bit.



Edited by Robinson99
Posted

Yea I'd say that's fairly accurate. Should be very close to dead level. Is that what you're going for?

 

 

Sent from my iPhone using Tapatalk

Yeah, I'm trying to get as close to level as possible. I'm one of those guys that doesn't need a truck really but bought one anyways because it was cheaper than the GM mid sized SUV's with a V6. I don't tow or haul anything heavy, ultimately I want to use it offroad more than anything so likely going to remove the lower valence to get a little better approach angle.

Posted

Yeah, I'm trying to get as close to level as possible. I'm one of those guys that doesn't need a truck really but bought one anyways because it was cheaper than the GM mid sized SUV's with a V6. I don't tow or haul anything heavy, ultimately I want to use it offroad more than anything so likely going to remove the lower valence to get a little better approach angle.

I'm kind of in the same boat as you really haha which is why i'm thinking about getting that 1/2" spacer to bring it up a tad more.

Posted

I'm kind of in the same boat as you really haha which is why i'm thinking about getting that 1/2" spacer to bring it up a tad more.

Yeah exactly. Right now I want to venture out to some trails but its so low on the front end I'm worried about hurting stuff which is kind of par for the course when offroading but still, might as well try to mitigate it. And I like the stance of a leveled truck.

  • Like 1
Posted

Has anyone had problems with the RC 2" front level (lower) block? I went to a 4x4 shop and the salesman was telling "sorry about your luck". "Who installed it?" I told him I did and then he had the balls to recommend that he take look at it to make sure it's correct.

 

 

Sent from my iPhone using Tapatalk

What's wrong with your level?

If you installed it correctly you shouldn't have any issues with it... At least I hope not.

I have the same one and haven't had any issues after 12k miles.

  • Like 1
Posted

What's wrong with your level?

If you installed it correctly you shouldn't have any issues with it... At least I hope not.

I have the same one and haven't had any issues after 12k miles.

Nothing. The sales person just introduced some doubt into my mind. I was a little apprehensive about the plastic blocks under this heavy body. But I bolted it all back down looked up the torque specs and called it a day. But he made it sound like he has seen many failures. Which sounded to me like he was trying to sell his product. Then when he found out i did a diy. Then he was really an ass

 

 

Sent from my iPhone using Tapatalk

Posted

Nothing. The sales person just introduced some doubt into my mind. I was a little apprehensive about the plastic blocks under this heavy body. But I bolted it all back down looked up the torque specs and called it a day. But he made it sound like he has seen many failures. Which sounded to me like he was trying to sell his product. Then when he found out i did a diy. Then he was really an ass

 

 

Sent from my iPhone using Tapatalk

Ahh gotcha. Well i've had two trucks that i have put this level on and have about 30-40k miles on them and havent had a single issue.

I haven't heard of anyone else having them either. But I havent look for the complaints. I bet if there were issues it would be pretty well known.

Posted

Ahh gotcha. Well i've had two trucks that i have put this level on and have about 30-40k miles on them and havent had a single issue.

I haven't heard of anyone else having them either. But I havent look for the complaints. I bet if there were issues it would be pretty well known.

On Amazon and on various 4wheel drive parts websites I read the 1 and 2 star reviews. None of them said anything about failures or fitment. I feel more confident about my plastic spacers.

 

 

Sent from my iPhone using Tapatalk

Ahh gotcha. Well i've had two trucks that i have put this level on and have about 30-40k miles on them and havent had a single issue.

I haven't heard of anyone else having them either. But I havent look for the complaints. I bet if there were issues it would be pretty well known.

On Amazon and on various 4wheel drive parts websites I read the 1 and 2 star reviews. None of them said anything about failures or fitment. I feel more confident about my plastic spacers.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted (edited)

Just finished mine on my 2016 Z71.... Didn't even remove the wheels... Just dropped the lower shock mounts and the sway bar links. Used some pry bar action and was able to get everything installed. Had to cut the bolt underneath the CV joint tho. Was a little too long.... 2" RC kit.

Edited by Intrieri
  • Like 1
Posted

Which is better installing a spacer under the strut or on top? Does it make a difference? I am sure under is easier to install but what about ride quality?

Posted

Here is mine - 2015 AT with Rough Country 2.5 just installed today stock 20" wheels and tires. I am going to be adding new shoes soon 275/65/20 either the Nitto MT or the new Ridge Grappler which isn't available yet but looks great.

That looks great iam thinking of getting the same RC 2.5 , how has ur ride change ? Any rougher , do u mind if I ask you where u ended up ordering ur kit ?
Posted

That looks great iam thinking of getting the same RC 2.5 , how has ur ride change ? Any rougher , do u mind if I ask you where u ended up ordering ur kit ?

Ride change is very minimal if any - this is the second one of that kit that I have had and I love it. Ordered right from RC direct and it got to me in two days. I recently installed new tires went with KO2's in a 275/60/20 and did a Borla exhaust also. Loving this truck.

  • Like 1
Posted

Ride change is very minimal if any - this is the second one of that kit that I have had and I love it. Ordered right from RC direct and it got to me in two days. I recently installed new tires went with KO2's in a 275/60/20 and did a Borla exhaust also. Loving this truck.

Awesome man glad to hear I hope to pick up a kit once I go back to work . Thanks for feedback again
Posted

Good god! I have no idea what to do now even though I read all this. I have a 2016 Silverado crew cab LT-Z71 and it came with the factory 22" wheels wrapped in P285/45r22. Here are my concerns: with adding a front only level kit.

-is there a 2.25-2.5" level kit I should stay away from due to my 2016 aluminum control arms?

-how do I know if I have aluminum control arms?

- will the above 2" level kit prematurely wear out components?

 

I would like to hear from someone who has the same model truck 4x4 with the 22" factory wheels and a 2.25 or 2.5" level kit front only.

Thanks in advance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
    • There was a recall on the tailgate in general for opening on its own. Mine has a cap on it and it won’t let the tailgate open.   My tailgate has two holes in the top of the tailgate. I filled them in with silicone sealant. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...