Jump to content

Recommended Posts

Posted

Eibach Pro Truck kit - springs and shocks 

love the ride and look - sits perfectly level

 

33BFDA66-E2A0-4177-9EFF-0305A3A431E6.jpeg

FEBB5D28-BABC-4131-AE6D-D6F8060A996F.jpeg

Posted
On 5/23/2019 at 11:53 AM, Pivot said:

I'm learning as I go. If you are going 2 1/2" up front, at least be prepared to replace UCA's. Some guys say they are fine and wheel size and offset can come into play. I do know one thing. I ordered the 2" rear spacer from Motofab. Pulling the stock block and replacing with 2" should net you 3/4 inch lift in rear. I already have the Bilstein 5100's in my garage. They allow stock up to 1" lift. $70 each on Amazon. They would be nice upgrade over Ranchos anyhow and won't break the bank. 

 

Most say if you go much over 2" up front, you "COULD" have poor angles on UCA . This is usually disputed back and forth. I went with the new Struts and Coils up front from Bilstein.Model #6112. I should get 1 3/4 up front on max setting #4. Bilstein said they are designed with stock UCA in mind. Both shocks and coils run between $600-$700. You could also look at the adjustable 5100's up front at about $90 a pop. Get the same lift. You reuse stock coils to keep down price point. 

 

I'm waiting for the block to arrive from Motofab and then I have to pick out new wheels and bigger tires. Wait till you get into wheels, offsets, backspacing, various tire sizes..

 

Yes you will need a Front end Alignment anytime you change things up front. Wheels, tires, struts what have you. GL

 

Well I just ordered the 2-1/2" Front and 2" rear from MotoFab.

Hopefully install goes ok and no rubbing.

If anyone has any pointers on install, other than what most videos show, let me know as it would be greatly appreciated.

Posted
 
Well I just ordered the 2-1/2" Front and 2" rear from MotoFab.
Hopefully install goes ok and no rubbing.
If anyone has any pointers on install, other than what most videos show, let me know as it would be greatly appreciated.
Thats what i have, along with readylift ucas. Have had no issuesbbb60b3b8e4666ce2886e03eb79fc444.jpg08595da76a64308f4eefe2c949680161.jpg

Sent from my SM-G973W using Tapatalk

Posted
1 hour ago, mrskiff said:

Thats what i have, along with readylift ucas. Have had no issuesbbb60b3b8e4666ce2886e03eb79fc444.jpg08595da76a64308f4eefe2c949680161.jpg

Sent from my SM-G973W using Tapatalk
 

I didn’t get UCAs, I guess I am hoping that I’m ok with the stock stamped ones. Truck looks nice!

Posted
On ‎5‎/‎24‎/‎2019 at 1:22 PM, aleeuw said:

 

Well I just ordered the 2-1/2" Front and 2" rear from MotoFab.

Hopefully install goes ok and no rubbing.

If anyone has any pointers on install, other than what most videos show, let me know as it would be greatly appreciated.

What wheels/tires do you have? I have an 18' with a Motofab 2.5" up front and 2" rear block. I also have 20" wheels and 275 width tires, I get some UCA rubbing at full lock. I didn't have any rubbing at all when I had my previous 1.5" level, so I can only assume the extra inch caused the rubbing..

Posted
6 hours ago, mistermcgoo said:

What wheels/tires do you have? I have an 18' with a Motofab 2.5" up front and 2" rear block. I also have 20" wheels and 275 width tires, I get some UCA rubbing at full lock. I didn't have any rubbing at all when I had my previous 1.5" level, so I can only assume the extra inch caused the rubbing..

I have the stock 20” wheels and tires. I should have the kit this week and going to try to find time this weekend to install. I will report back with the outcome. 

Posted

I have basically the same setup that you intend to install on stock 20” with 285x60R20 Toto Open Country RTs and had to add RC 1/4” wheel spacers to stop the rubbing on UCAs and sway bar. 

7EEF8A3D-ADBA-4887-A23D-8D7AEBF0D5A3.jpeg

Posted
8 hours ago, Slick66 said:

I have basically the same setup that you intend to install on stock 20” with 285x60R20 Toto Open Country RTs and had to add RC 1/4” wheel spacers to stop the rubbing on UCAs and sway bar.

 

Are they from Kansas?  :P

Posted
13 hours ago, Slick66 said:

I have basically the same setup that you intend to install on stock 20” with 285x60R20 Toto Open Country RTs and had to add RC 1/4” wheel spacers to stop the rubbing on UCAs and sway bar. 

7EEF8A3D-ADBA-4887-A23D-8D7AEBF0D5A3.jpeg

I'm still learing the offsets and trying to figure tires and rims. Assuming stock rims and guessing you have +27 offset, that tire moved the inner sidewall exactly .24 " closer to suspension and frame. I might be wrong and others with more experience please chime in, but... If you moved to a +20mm offset, I don't think you would need the spacer. A +20 offset would move the outer sidewall .08 away from suspension with that tire. You did increase the total diameter of the tire though significantly and that could present issues. Total tire diameter would increase from 100.2 up to 105.1  Truck looks nice with tires and level. 

Posted (edited)
1 hour ago, Pivot said:

I'm still learing the offsets and trying to figure tires and rims. Assuming stock rims and guessing you have +27 offset, that tire moved the inner sidewall exactly .24 " closer to suspension and frame. I might be wrong and others with more experience please chime in, but... If you moved to a +20mm offset, I don't think you would need the spacer. A +20 offset would move the outer sidewall .08 away from suspension with that tire. You did increase the total diameter of the tire though significantly and that could present issues. Total tire diameter would increase from 100.2 up to 105.1  Truck looks nice with tires and level. 

Ah, if only someone would make replica wheels with more accommodating offsets. Many like the stock wheels, especially the snowflakes. 

 

And your math works, but tire manufacturers aren't quite that precise. One brand 285 might be 283,whereas another might be 286. Then there's the difference in how aggressive the sidewall lugs are. Lots of variables. 

Edited by MBSierra17
  • Thanks 1
Posted

Does anybody know what the differences are between a top mount and bottom mount spacer to level?

 

The top mounts seem to be more expensive and may require cutting the length of the top shocks bolts from what I can tell, so are there any positives to going with the more expensive top mounts?

Posted
On 5/28/2019 at 7:54 AM, Slick66 said:

I have basically the same setup that you intend to install on stock 20” with 285x60R20 Toto Open Country RTs and had to add RC 1/4” wheel spacers to stop the rubbing on UCAs and sway bar. 

7EEF8A3D-ADBA-4887-A23D-8D7AEBF0D5A3.jpeg

What bug deflector do you have?  That is the style I am looking for and have the same color truck.

Posted

Got the MotoFab 2.5” front/ 2” rear installed last weekend. Install went pretty good, only about 4 hours complete. No rubbing, seems to ride same as stock. Thanks to those who provided input!

C2D14226-C7E9-4567-90BD-C6D8DF2F70D9.jpeg

  • Like 4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 
    • I agree with this assessment. As you know I’m testing longevity with vehicles for the first time. I have a few vehicles I passed to kids and grandkids. We’re all past 100K miles some approaching 170K. I’m the only one doing 5k oil changes. The rest whatever the minder says. I’m the only one doing frequent transmission service. My odyssey the trip vehicle at 200K will be finished as a trip vehicle. I recently changed to high mileage oil, Valvoline. I can’t get past the fact that all manufacturers want to claim long service life. I just don’t make sense that they would go with low weight oil for mileage. While sacrificing longevity.
    • There's absolutely a mountain of profit in catering to the "I do my own research" crowd, people who are certain they know better. And I don't mean there isn't data to support that 0w40 produces less wear product than 0w20 in an engine like the 3.0 Duramax, that only feeds them the assurance they need. Again, my whole thing with oil selection is, sure, 0w40 or 0w30 produces less wear product. Are we talking the difference between the engine lasting only 100k versus 200k? Or are we talking more like, if the engine will already go 350k on a good 0w20 regimen recommended by the OE, is using 0w40 going to get us to 355k, assuming we can even get the rest of the truck to last that long, meanwhile sacrificing the first 5y, 100k in powertrain warranty. The answer isn't easy, there are tradeoffs.   I willfully use 0w20 Dexos D for this reason, knowing that a 0w40 will produce slightly less wear. I don't believe the delta in wear product is meaningful over the lifetime of the engine, and I place much more importance on driving style and overall feeding and care of the engine as a whole. It's the mentality that someone can abstain from alcohol their whole life which is an amazing boost to health by itself, theoretically. But if they're sedentary, that lifestyle choice will most likely kill them young despite their other, concerted efforts. Maybe someone doesn't drink AND they are the perfect picture of health and activity AND they use 0w40 AND they treat their engine perfectly. If living until 130 years is the goal, sure, do that. But it's going to be a really old truck falling apart around a good engine for that last 30 years, without a doubt.   I watched Demonworks' other video on the 100k+ 3.0 Duramax that had dealer 0w20 changes on what appears to be OLM-prescribed intervals (8-10k).   The QR codes are still present and readable on the main bearings. That's how little wear it has.   That's not proof that anyone else should stick to 0w20, but it's confirmation, for me, that 0w20 is perfectly acceptable to use in these engines.
    • 1Based on independent testing of OE 0W-20 in the Peugeot TU3M Wear Test as required by the dexos1 Gen 2 specification.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...