Jump to content

Recommended Posts

Posted

00ef6017d40d5e3d24097ea215d07b10.jpg

 

Trimmed valance

75d71d8836ebfbf4f75a213d5d8b1999.jpg

 

Love these new trucks, besides the headlights...need hid's quickly...driving up north at night this weekend and couldn't see shit....

  • Like 6
Posted

00ef6017d40d5e3d24097ea215d07b10.jpg

Trimmed valance75d71d8836ebfbf4f75a213d5d8b1999.jpg

Love these new trucks, besides the headlights...need hid's quickly...driving up north at night this weekend and couldn't see shit....

I did the mod to keep the fog lights on whenever the driving lights are on so basically they are on all of the time the head lights are on high or low beams.

 

Enough light for me now.

Posted

I had my fogs on with lows, and it was horrible, I do mostly city driving so its not bad, but up in northern Michigan with no street lights anywhere and deer everywhere I need better lighting....even if my fogs were on with high beams I don't think it would help...the only thing I can see with my highs are squirrels in high up in pine trees....

Posted

00ef6017d40d5e3d24097ea215d07b10.jpg

 

Trimmed valance

75d71d8836ebfbf4f75a213d5d8b1999.jpg

 

Love these new trucks, besides the headlights...need hid's quickly...driving up north at night this weekend and couldn't see shit....

 

 

nice truck! My truck looks exactly like this one lol.

Posted

New pic of the current setup...removed .5" from the lift so now at 3.5" overall.

 

newpichdr_zps7b78c0a5.jpg

Could you fit a 285/55/22 without any rubbing? It's a 35, but more narrow.

Posted (edited)

Just took delivery on Saturday, so forgive the lone (and crappy) shot. SLE, 4x4, 4.3L, value package, trailer brake controller. Planning on keeping it rather stock but have a Roll-X top on order and will bringing it by the local Line-X shop sometime soon.

10659434_10101052808360786_2797366669657

 

-Evan

Edited by GMMediumDutyMQ
  • Like 3
Posted

Just took delivery on Saturday, so forgive the lone (and crappy) shot. SLE, 4x4, 4.3L, value package, trailer brake controller. Planning on keeping it rather stock but have a Roll-X top on order and will bringing it by the local Line-X shop sometime soon.

 

10659434_10101052808360786_2797366669657

 

-Evan

Nice ride, just like mine but, I have Fire Red and no trailer brake control.

  • Like 2
Posted

 

3a9462dddbdcc9f615a031268365ea5f.jpg had so much fun at the beach with the truck, first time taking her. No problems going through the loose sand and is only a 2wd and the v6 did very well for the donuts. 3564f304dc06c5eeea7ac4279b44a999.jpgalso took her the ranch the other day and didn't get stuck there either haha.

  • Like 3
Posted

How's the ride?

 

The ride is much better. I was pleasantly surprised by how much difference in stiffness (or lack thereof) there was just by removing .5" of the leveling kit. The angles are much better as well.

 

Could you fit a 285/55/22 without any rubbing? It's a 35, but more narrow.

 

A 285/55/22 would fit easily on the factory offset wheels. Now if you start going wider and more negative on the offset you might start running into issues with rubbing

Posted

Thinking about the additional 1" in the back to go with the RC leveling kit while towing. ypu5u6ap.jpgynybaby3.jpg

go with the add a leaf I have it on my 09 little stiffer of a ride but when towing you can't even tell nothing back there
  • Like 1
Posted

Getting my truck built as we speak. 285.55R22 Nitto Trail Grappler MT's (34.5" tire). 4" Ready Lift SST, 22x9.5 Fuel Mav's with a +25 offset. These do not rub from what the place is telling me :-). AMP research steps are going on now and spray in liner. Then off to the body shop to have chrome painted white and new Royalty Core RC1X grille with LED light bar installed. Will post more pics when it is complete.post-135722-0-28962100-1414442727_thumb.jpgpost-135722-0-04778700-1414442732_thumb.jpg

post-135722-0-28962100-1414442727_thumb.jpg

post-135722-0-04778700-1414442732_thumb.jpg

post-135722-0-28962100-1414442727_thumb.jpg

post-135722-0-04778700-1414442732_thumb.jpg

post-135722-0-28962100-1414442727_thumb.jpg

post-135722-0-04778700-1414442732_thumb.jpg

  • Like 2
Posted

Getting my truck built as we speak. 285.55R22 Nitto Trail Grappler MT's (34.5" tire). 4" Ready Lift SST, 22x9.5 Fuel Mav's with a +25 offset. These do not rub from what the place is telling me :-). AMP research steps are going on now and spray in liner. Then off to the body shop to have chrome painted white and new Royalty Core RC1X grille with LED light bar installed. Will post more pics when it is complete.attachicon.gifIMG_3593.jpgattachicon.gifIMG_3595.jpg

Looks great! Let me know if you want to sell that Denali grill...

Posted (edited)

2015 Silverado 1500 4x4 LTZ. Forrest Green Metallic.

 

IMG 0122

Yep, it is green.

IMG 0123

 

Here's a short critique I posted earlier to a different thread...

 

I just replaced my 2011 LT Z71 with a 2015 LTZ 4x4 with 5.3 and 3.42 rear, both crew cabs. I usually go for Summit White, but this time I opted for that new Dark Forrest Green Metallic special order color. It's really eye catching, and I get a lot of comments about it when I'm out. Here's some of my takes:

 

I have the power pedals in the 2015, and did in my 2011. I have noticed right away that I can find a MUCH better driving position than I could in the 2011. I alwasy felt cramped in the 2011 even with the pedals extended all the way down. I also found the less tilt to the base of the seat is noticable, it's not bothered me too much yet. The stitching in the LTZ has a beaded stitch feature going down the side of my leg though, hopefully that won't be a problem either but I do feel it. But overall, it is better than the 2011. I've got cooled seats, which is a major plus to me. Couldn't stand the sweaty bum problem from the 2011 during the Summer months. I have the tilt and telescope stearing wheel, that is a great thing too. It will be very nice to get it just right after a hard day's work on remote jobs to make my drive home a little easier.

 

I have the 5.3, and the same was in my old truck. There is a major difference to the exaust tone between the old and new. I think the old one being a Z71 was tuned a bit louder. I'm enjoying a lesser tone from the new one. If I were still young I'd probably like the 2011 tone better, but pushing 5 decades has softened my ears to nicers tones. The inside ride is as you said: Shockingly quiet. My daughter is thrilled that she can now carry a conversation from the rear seat without shouting, as well as hear us back there much better too. Not only do the new doors help with the quiet, but I think there are a lot more added padding around the truck to reduce road noise. There is a noticably bigger heat/noise padding between the engine and firewall. And, my LTZ has the padded wheel well liners, not sure if that's normal options for lower models too. I haven't gone under the truck yet to check out the bottom setup, but I bet I find noise reduction attempts there too. The truck is just amazingly quiet.

 

I opted for the normal 4x4 this time over the Z71. Again, the age thing has me dislikeing the off-road ride, this 4x4 is very smooth and easy. This was probably the major factor in my decision to upgrade my 2011 to the newer model. The 2015 feels more pronounced and taller on the road, and it is taking me a bit to get used to the new view from what feels to be a higher positioned truck. Probably isn't taller by much if any but it feels like it is. I've had it out in some adverse weather (strong rain storms) and felt extremely confident in how the truck was handling the road during these windy and very wet times. No frozen stuff yet to try, but waiting almost eagerly for a test on that type of road condition. The truck just seems to be very planted to the road, and moves exactly as you'd expect when maneuvering. I especially love the new electric power steering!

 

I've found the radio to be better, as far as audio quality. The old truck was a Bose equiped Nav unit, as is the new truck. The new one seems to have a lot more power to the speakers. I've always like the sound of Bose, but they usually strike me as rather quiet. The 2015 is not as quiet as past Bose models. I'm a bit of an audiophile and love loud music. I almost can't handle the highest volume setting of my new truck. I find the MyLink system to be fantastic. Though I do miss one feature. On the MyLink there is no "Bluetooth", and "Voice" command to talk directly to my iPhone. I used to take a lot of notes this way and set reminders that I'd think of while in travel plus I could craft specific answers to text messages after having Siri read them to me (Gotta keep both hands on the wheel...). Can't do that through the GM MyLink radio any more. This is bad, but at least if I can remember to plug my iPhone in, I can use the "hey Siri" feature of iOS 8 as a backup to that missed resource. Hopefully GM will update the radios to add that feature back in. The texting feature of MyLink does make up for some of the direct voice command missing problem but not completely. Pandora and regular music ability from the phone is very nice. Bluetooth music is nice, but not quite as featured as when you plug in to one of the USB ports that allow data too. You only get full Pandora functionality then, and a few other audio information features. The old radio's voice commands were very verbose and tedious at times. The new MyLink allows for me to choose between verbose or terse commands so I don't have to wait to get commands done. I feel it could be made even more terse, but the change is still very welcome. Very nice! I also love the maps, and their 3D buildings. I live in a medium sized city and was surprised and the number of 3D models buildings shown on the map in my town. But they do seem to miss a few older buildings that should have been 3D'd.

 

One other small detail I found that I don't like is that they moved the power lock switch on the door handle. It's now much farther away from the handle so I can't lock the door as I open it with one hand by hitting the lock button with my thumb as I did on the old 2011 truck. Not sure why they changed this. Seems kind of stupid because I now have to let go of the handle or use two hands to exit and lock the truck. I think most folks will use the lock 100 times more than the kid door/window lock thing that now sits right up agains the handle, even parents. Usually you just lock the back, and hardly ever touch it. But you are constantly locking and unlocking doors. Not a biggie, but noticable to me. All other controls on the door are a move toward the better. Auto down on all windows, and auto up on the driver are a very nice change. I also love the new keyfobs, I used to break the old ones pretty easily. The newer ones have the metal around the edges that will make them much tougher to the adverse environment in my pockets.

 

Over all, I feel that this is one of the best moves in a truck purchase I've ever made. I'm only sad that GM was not more giving on incentives during their "Truck Month" on 2015 models, but I guess that's to be expected. My dealership did a fantastic job anyway. So far only have a couple hundred miles on the OD, can't wait to put a LOT more on it.

Edited by Nargg
  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • Paid $2.72 for E85 today.
    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...