Jump to content

2014+ Lowering / Drop Kits

mjw930

By mjw930
in Modifications & Accessories

 Share

Recommended Posts

Nasty Senior Enthusiast

Nasty

Posted
Posted

Still have to put my viking coilovers in but I love how my truck sits 

20180505_135259.jpg

  • Like 1
  • Replies 3.4k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Heavy_Static
Heavy_Static

A few pics from last week:    

bakerrr
bakerrr

First post here Picked her about 2 weeks ago couldn't wait to start modifying it. Just installed Belltechs 4/7 drop this weekend It's low enough for the time being ??  

Nasty
Nasty

Posted Images

qwank Senior Enthusiast

qwank

Posted
Posted
3 hours ago, 204-WPG said:

The provided Transmission Spacer, it says in the instruction for 2WD only, but did you need to install it?

 

on the other note, how did you install/tighten the provided bump stop? No access  to reach the nut...Lol

 

I didn't have to use the transmission spacer, I threw it in the glove box just in case though 

 

For the bumpstops, you drill a 5/16'' hole in the frame and use a 3/8-16 tap to make some threads. I just put a dab of red loctite on the bump stop and screwed it into the frame by hand as tight as I could get it.  

 

Nasty Senior Enthusiast

Nasty

Posted
Posted
22 minutes ago, qwank said:

 

I didn't have to use the transmission spacer, I threw it in the glove box just in case though 

 

For the bumpstops, you drill a 5/16'' hole in the frame and use a 3/8-16 tap to make some threads. I just put a dab of red loctite on the bump stop and screwed it into the frame by hand as tight as I could get it.  

 

I got a belltech bump stop that has a nut and bolt. I used a #10 self tapping steel screw :)

qwank Senior Enthusiast

qwank

Posted
Posted
1 hour ago, Nasty said:

I got a belltech bump stop that has a nut and bolt. I used a #10 self tapping steel screw :)

yeah, some kits come with the self tapper type, mine came with the screw in style.  It came with nuts too but there's no way to get them on there.  

6ftdwn57 Enthusiast

6ftdwn57

Posted
Posted

So I did my drop last year right after I bought the truck. 2017 5.3L 2wd. I went with the McGaughys kit. I set the front at 5" of drop. The back I did the axle flip, and used their new hanger on the highest setting(for the most drop). Went with 4' angle shims on the rear to set the driveline correctly, and had to have the driveshaft shortened. Handles and drives beautifully. Currently running their supplied rear shocks as well(pretty happy with them actually). 

 

My question is, comparing my truck to pictures of trucks with the same setup, it looks like I'm missing another 1" of drop in the rear? At first I liked the look of the raked stance, but now I'm wanting the back down lower. Am I missing something here? 

19702334_10114374636974164_8143766922814001662_n.jpg

19731806_10114375122635894_3926980197988788986_n.jpg

  • Like 1
6ftdwn57 Enthusiast

6ftdwn57

Posted
Posted

I am also running bigger tires in the rear now, that isnt shown in those pictures. Nitto 305/40/22 currently, was running 285/40/22. So it raised it up a touch as well.

6ftdwn57 Enthusiast

6ftdwn57

Posted
Posted (edited)

Sorry, looks like after reading back through this thread, if I wanted even a lower drop in the back, I should have stayed with my stock hangers. I'm wondering if a shackle will get me my 1'' I'm looking for. Anyone run that kind of setup?

Edited by 6ftdwn57
  • Like 1
Nasty Senior Enthusiast

Nasty

Posted
Posted
47 minutes ago, 6ftdwn57 said:

Sorry, looks like after reading back through this thread, if I wanted even a lower drop in the back, I should have stayed with my stock hangers. I'm wondering if a shackle will get me my 1'' I'm looking for. Anyone run that kind of setup?

Any lowering shackle

6ftdwn57 Enthusiast

6ftdwn57

Posted
Posted (edited)

since my shackle is running pretty much vertical, I would need an 1" shorter shackle to achieve what I want. Which brings us into the lowering/lift shackle debate after flipping. I think the lowering shackle would actually cause lift in this application.

 

I think this is what I'm looking for? Since I'm running the lift hanger from McGaughys. The other "lowering shackles" out on the market look to be much longer, which would cause lift.

 

https://switchsuspension.com/gmc-sierra-1500-2014-2018-rear-1-drop-shackles-mcgaughys-part-34040/

 

 

Edited by txab
Nasty Senior Enthusiast

Nasty

Posted
Posted
4 minutes ago, 6ftdwn57 said:

since my shackle is running pretty much vertical, I would need an 1" shorter shackle to achieve what I want. Which brings us into the lowering/lift shackle debate after flipping. I think the lowering shackle would actually cause lift in this application.

 

I think this is what I'm looking for? Since I'm running the lift hanger from McGaughys. The other "lowering shackles" out on the market look to be much longer, which would cause lift.

 

https://www.suspensionshop.com/gmc-sierra-1500-2014-2018-rear-1-drop-shackles-mcgaughys-part-34040/

You're at 5 right now? With stock shackle? How is your hanger set?

6ftdwn57 Enthusiast

6ftdwn57

Posted
Posted (edited)

To clear everything up:

If you have used McGuaghys flip kit, with lift hanger, then you need shorter(lift) shackles to achieve a drop in suspension. Like in this link: 

https://switchsuspension.com/gmc-sierra-1500-2014-2018-rear-1-drop-shackles-mcgaughys-part-34040/

 

If you have not used a rear flip kit, then you would need a longer(lowering) shackle to achieve a drop in suspension. Like in this link: 

 

https://switchsuspension.com/chevrolet-silverado-1500-2014-2018-rear-1-2-drop-shackles-mcgaughys-part-33037/

Edited by txab
Nasty Senior Enthusiast

Nasty

Posted
Posted

Lift shackle is to short. I had one. Horrible ride. Not enough movement 

6ftdwn57 Enthusiast

6ftdwn57

Posted
Posted

I used McGuaghys flip kit, with their lift hanger, and stock shackles. Lift hanger set to the highest setting(for most drop). This is supposed to achieve 6" of drop.

 

If I would have kept my stock hangers, then I would have yielded 7" of drop.

 

So now, Im going with McGuaghys shackle designed for their flip kit with lift hanger for another 1" of drop, putting me down to 7". Which would be opposite of what you would need to lower, if you havent done a flip and lift hanger

6ftdwn57 Enthusiast

6ftdwn57

Posted
Posted
2 minutes ago, Nasty said:

Lift shackle is to short. I had one. Horrible ride. Not enough movement 

Really? Damn! Did it feel like not allowing the springs to move or something? Like a harsher ride?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • TrueBlue
      No Software Updates - Old Build

      By TrueBlue · Posted

      That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed. Why not updates as well, especially since some of those can be safety related also?
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      That's good to know, but I don't think I'll even be running them under 45 in the rear  unless it's on the sand or something but will only be for a short distance anyways!    I didn't read all the instructions in the booklet yet, but do you know let's say I set the rear psi on the placard to 45, will the warning light come on soon as it drops under 45 or is there a percentage it has to drop from the set value before the warning light is triggered?
    • newdude
      Would this CV Shaft be bad?

      By newdude · Posted

      That's bad.  Like, its probably destroying the stub axle the CV slides into.   Do you have a proper lift installed with differential lowering brackets?  Did you install AT4/Trail Boss factory CV axles?  
    • PunchT37
      Would this CV Shaft be bad?

      By PunchT37 · Posted

      Hot? New Jersey? Today? I was working on my old 2000 Silverado 1500 today. Believe me, it was boiling hot today. As it has been.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...