Chadwilliam1 Posted February 17, 2016 Posted February 17, 2016 Per Fondupot's DIY video on the PNL install, note that installing the C-clip so the open part faces the hinges of the tailgate seems to do the trick. link?
Back in a Bowtie Posted February 17, 2016 Posted February 17, 2016 ok so whats the final on the correct wires to tap into for a silverado for both one press unlock and 2 press unlock??
crewl1 Posted February 17, 2016 Posted February 17, 2016 ok so whats the final on the correct wires to tap into for a silverado for both one press unlock and 2 press unlock?? Go with this for Silverado, either at the BCM plug or the sill. http://www.gm-trucks.com/forums/topic/156468-2014-power-tailgate-lock-installed/page-7?do=findComment&comment=1498774
Back in a Bowtie Posted February 17, 2016 Posted February 17, 2016 Go with this for Silverado, either at the BCM plug or the sill. http://www.gm-trucks.com/forums/topic/156468-2014-power-tailgate-lock-installed/page-7?do=findComment&comment=1498774 is that grey (green stripe) brown (yellow) just want to be 100% sure... sorry if its a stupid question
crewl1 Posted February 17, 2016 Posted February 17, 2016 is that grey (green stripe) brown (yellow) just want to be 100% sure... sorry if its a stupid question I did what he said above that post - "Then I connected the blue and green wire to the grey/green and brown/yellow coming from the x6 bcm connector(pink) just to the right of e-brake pedal." Blue wire goes to grey/green and green wire goes to brown/yellow. Dont recall if it is a stripe or not but they are the only two with those combos on the connector. If you are using the door sill then these would be the fattest ones if there are others with the same colors in the sill.
14GMCSLTSIERRA Posted March 23, 2016 Posted March 23, 2016 I installed mine yesterday. Very easy to do! I love it! 1
20feetup Posted April 14, 2016 Posted April 14, 2016 I will be doing this soon! Thank you all for the write up
15GMCSLT Posted June 18, 2016 Posted June 18, 2016 Good info here guys. Will be doing the Pop and Lock soon! Sent from my iPhone using Tapatalk
Ck960 Posted June 22, 2016 Posted June 22, 2016 Great mod. Very doable. Does anyone know of a constant power supply wire I could tap into while I've got the door sill plate opened for another mod I want to do? What are the wire connectors called that come with the kit?
fondupot Posted June 29, 2016 Posted June 29, 2016 My tailgate has become kind of hard to open lately when it is unlocked. Anyone else experience this with their pop n lock installed?
winn0040 Posted June 29, 2016 Posted June 29, 2016 My tailgate has become kind of hard to open lately when it is unlocked. Anyone else experience this with their pop n lock installed? Still gotta be easier to open than when it's locked though, right? Mine is still working well, but it's only been on for about 8 months.
Madcow2020 Posted July 2, 2016 Posted July 2, 2016 My tailgate has become kind of hard to open lately when it is unlocked. Anyone else experience this with their pop n lock installed? Mine did that. The striker for the right side of the tailgate came out of alignment. I loosened it and adjusted it back to the original spot tightened it back up and it been fine. Look to see if your tailgate is closing flush. Sent from the future via a wifi time portal.
Madcow2020 Posted July 8, 2016 Posted July 8, 2016 Fondupot did you get your tailgate operating correctly? Sent from the future via a wifi time portal. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now