Jump to content

Recommended Posts

Posted (edited)

It seems like an 8 cylinder engine should run al 8 all the time. Fuel savings are great but if I wanted a V4 that’s what I’d buy. Even with my 5.3 (I don’t need a lot of power) I think I want all 8 all the time. I get trying to be efficient but something seems odd about taking half the engine out of the equation many times in the course of a 2 mile drive to work.

 

The power drain is a little concern (I don’t want to keep plugging it in and out) but it seems like a simple (and reversible) way to gain some performance. And let’s be honest, while good economy is nice, or we were that concerned about gas mileage we’d be driving a Civic.

Edited by SteveC
  • Like 2
Posted

If I had a 2 mile drive to work I would put the trans. in manual 4,5, 6, 7th gear depending on the roads driven, no AFM activated.

2 miles it's not getting up to temperature. The oil, trans fluid, differentials don't dissipate moisture. 

The exhaust doesn't get warm enough to rid its self of moisture either promoting rust.

I would take the long way to work sometimes to get the temps up. YMMV.

The old lady car that was driven to the library. 

:)

   

 

  • Like 1
Posted
If I had a 2 mile drive to work I would put the trans. in manual 4,5, 6, 7th gear depending on the roads driven, no AFM activated.
2 miles it's not getting up to temperature. The oil, trans fluid, differentials don't dissipate moisture. 
The exhaust doesn't get warm enough to rid its self of moisture either promoting rust.
I would take the long way to work sometimes to get the temps up. YMMV.
The old lady car that was driven to the library. 
[emoji4]
   
 


I have a short in town commute. I usually put my 6 speed in L5 for it.

The AFM does not bother me on the highway much, but I’m not a big fan of it for city driving.


Sent from my iPhone using Tapatalk
Posted

Hmm. I guess I didn’t realize people drove around in “L” all the time. I just assumed that was for special circumstances and towing and such. 

Posted (edited)

I put mine in M6 all the time.  Eliminates the V4.  There is no "L".

Edited by F4Gary
Posted
2 hours ago, Shakeydeal said:

IIRC, M6 will activate V4 when it shifts into 6th gear. M5 will not.

 

Shakey

I'm pretty sure when in L6, my 2018 6 speed still goes into V4 in any gear it wants.  It definitely never goes into V4 when in L5.

Posted
2 hours ago, rkj__ said:

I'm pretty sure when in L6, my 2018 6 speed still goes into V4 in any gear it wants.  It definitely never goes into V4 when in L5.

Correct. Needs to be below the “top” gear.

Depending on what vehicle/model user F4Gary has, if he has the 8-sp tranny for him 6 or 7 would work.

It also goes in to V4 mode with tow-haul on unfortunately. I wish there was a DIC selection to turn it off rather than spending money on a device.

Posted
Just now, SDfromSD said:

 I wish there was a DIC selection to turn it off rather than spending money on a device.

Yes, that would be nice, if the driver could choose. 

 

V4 mode does not bother me at all on the highway, when I'm using cruise control.  I like to save fuel on long trips.  I don't desire to delete AFM entirely, it would just be nice to choose when it can activate. 

  • Like 1
Posted

On my 2014 i noticed the transmission gets confused a lot more when AFM is active. It clicks and clunks more so than when its in V8 mode only.

I used a hand held tuner to tune and disable AFM. Im only getting 2-3 mpg hit by doing that but truck drives better so its worth it.

Posted
On 11/15/2018 at 10:19 AM, SDfromSD said:

Correct. Needs to be below the “top” gear.

Depending on what vehicle/model user F4Gary has, if he has the 8-sp tranny for him 6 or 7 would work.

It also goes in to V4 mode with tow-haul on unfortunately. I wish there was a DIC selection to turn it off rather than spending money on a device.

You guys are correct.  Just noticed that the other day.  M6 allows V4.  M5 does not.  Sorry for the misinformation.

 

  • 2 weeks later...
Posted
On 11/15/2018 at 11:29 AM, rkj__ said:

Yes, that would be nice, if the driver could choose. 

 

V4 mode does not bother me at all on the highway, when I'm using cruise control.  I like to save fuel on long trips.  I don't desire to delete AFM entirely, it would just be nice to choose when it can activate. 

I feel the same way, the V4 is great for me in a lot of instances and gets me great gas mileage, but there are times I'm noticing where I wish I could shut it off. Like if I'm stuck behind someone driving slow...the thing bogs down and constantly switches in and out of V4, seemingly not knowing what to do. But those are rare occasions and the person really has to be driving slow, otherwise I love the V4. If I towed or plowed, I'd definitely want the V8 on all the time.

  • 2 weeks later...
Posted

do i still need to even bother with the AFM delete on a 2018 Motor or should i just not worry about it. I turned it off on my old 2008 6.2L for a bout a year but never really saw a difference. im pretty sure the AFM is what is killing my FIL's 2007 5.3 motor

Posted
On ‎11‎/‎15‎/‎2018 at 10:19 AM, SDfromSD said:

Correct. Needs to be below the “top” gear.

Depending on what vehicle/model user F4Gary has, if he has the 8-sp tranny for him 6 or 7 would work.

It also goes in to V4 mode with tow-haul on unfortunately. I wish there was a DIC selection to turn it off rather than spending money on a device.

Few will be interested in this tidbit but take off in M5, when you reach 55 mph (highway only) tap in tow mode. Then select M6. The transmission stays in 5th gear as you are below the upshift point for 6th gear but as M6 is selected the AFM works. This will also work in 4th gear if you haven't reached the 5th gear upshift. I find it useful on rural highways in hilly terrain against light wind. Just stays in 5th 95% of the time and yet allows AFM on the rare flat. Downhill the fuel map shuts of the injectors anyway. When approaching a town tap back to M5 and delete tow mode. My truck is geared 3.23. Exact points will vary with gear and equipment.  

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   2 Members, 0 Anonymous, 2,978 Guests (See full list)


  • Latest Articles

  • Posts

    • My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...