Jump to content

Bilstein shocks thread

yanzhixiang

By yanzhixiang
in Modifications & Accessories

 Share

Recommended Posts

Mp87 Enthusiast

Mp87

Posted
Posted

 

 

You can try to compress the springs with ratchet straps - generally unsafe but if you are not removing the top hat not much risk involved.

Thanks for the suggestion. Tried my hardest to be "safe", picked up some compressors at pep boys. There just isn't enough room to get them in the right spot without dropping the shock. A couple clicks with a makeshift endless ratchet did the trick.

 

Maybe the most unconventional thing I've ever done to a vehicle.

post-167364-0-13333300-1483932278_thumb.jpg

post-167364-0-64246400-1483932445_thumb.jpg

post-167364-0-13333300-1483932278_thumb.jpg

post-167364-0-64246400-1483932445_thumb.jpg

post-167364-0-13333300-1483932278_thumb.jpg

post-167364-0-64246400-1483932445_thumb.jpg

post-167364-0-13333300-1483932278_thumb.jpg

post-167364-0-64246400-1483932445_thumb.jpg

  • Like 1
  • Replies 2.8k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

bwilloby46
bwilloby46

I put the bilstein 5100s on the rear of my 14 High Country with a new 2" block a few weeks ago. Ride is unbelievable compared to stock. Liked it so much I got the adjustable 5100s for my front, remove

schloppy
schloppy

Hello, I'm not new to the forum but I just joined and figured I'd contribute to the community.   2016 Silverado 1500 "Z71" removed rancho's and swapped with Bilstein 5100's all around. So after d

Jullian is not my name
Jullian is not my name

I just got done with installing my 6112's on my 2014 GMC Sierra Crew Cab.  Reading some install guides on here really helped, along with printing some Chilton Repair guide torque specs that I got from

Posted Images

aaronarf Enthusiast

aaronarf

Posted
Posted

Thanks for the suggestion. Tried my hardest to be "safe", picked up some compressors at pep boys. There just isn't enough room to get them in the right spot without dropping the shock. A couple clicks with a makeshift endless ratchet did the trick.

 

Maybe the most unconventional thing I've ever done to a vehicle.

Glad to see it worked out! Figured that would be your best bet, even with pro spring compressors it's scary business though. Ratchet straps are very versatile, can even reset the bead on tires with them

 

Sent from my SM-G930V using Tapatalk

  • 2 weeks later...
MRTMotorsports Enthusiast

MRTMotorsports

Posted
Posted

Update on the GM 6112s! They will have two GM 6112 models, 09-13 & 14+. The 09-13 GM 6112 ETA is end of March or early April. The 14-15 is even farther. It's probably a little too early to give out part#'s, but you'll be the first to know once they're released!

  • 2 weeks later...
SlemmerSierra15 Enthusiast

SlemmerSierra15

Posted
Posted

So from what ive read and correct me if im wrong, 6112 for 2015 Sierra aren't out yet and wont be until after April. And these 6112 will increase the front end of my truck to a max of 1.8" on top of my 2.5" level kit. I am looking to get a little more height so i can increase the offset of my rims and thought this would be a great option.

  • Like 1
MRTMotorsports Enthusiast

MRTMotorsports

Posted
Posted

So from what ive read and correct me if im wrong, 6112 for 2015 Sierra aren't out yet and wont be until after April. And these 6112 will increase the front end of my truck to a max of 1.8" on top of my 2.5" level kit. I am looking to get a little more height so i can increase the offset of my rims and thought this would be a great option.

 

Although that is the listed height, the 6112 will be able to provide more than 2" of lift depending on the truck. You cant really stack lifts just like that without damaging the upper ball joint on the control arm. You could run the Bilstein on the lowest setting with the spacers, any higher and you will need aftermarket uniball control arms.

SlemmerSierra15 Enthusiast

SlemmerSierra15

Posted
Posted

 

Although that is the listed height, the 6112 will be able to provide more than 2" of lift depending on the truck. You cant really stack lifts just like that without damaging the upper ball joint on the control arm. You could run the Bilstein on the lowest setting with the spacers, any higher and you will need aftermarket uniball control arms.

  • Like 1
SlemmerSierra15 Enthusiast

SlemmerSierra15

Posted
Posted

Blank post?

sorry yes, very new to this. So if im leaving the 5100's at lowest setting, that wont affect my ride height which is really what im looking for, theres no point in getting the 5100 or 6112 when they come out. if i want to affect ride height ill have to do a body lift or suspension to push my tires out to the desired offset i want, or trim.

fr8trainkills New Member

fr8trainkills

Posted
Posted

Update on the GM 6112s! They will have two GM 6112 models, 09-13 & 14+. The 09-13 GM 6112 ETA is end of March or early April. The 14-15 is even farther. It's probably a little too early to give out part#'s, but you'll be the first to know once they're released!

 

Are you offering a pre-order for the 6112's?

  • Like 1
Madcow2020 Enthusiast

Madcow2020

Posted
Posted

sorry yes, very new to this. So if im leaving the 5100's at lowest setting, that wont affect my ride height which is really what im looking for, theres no point in getting the 5100 or 6112 when they come out. if i want to affect ride height ill have to do a body lift or suspension to push my tires out to the desired offset i want, or trim.

I would start by asking what is the desired height you would like, and go from there to is it two wheel drive or four wheel drive. Because depending on what configuration your truck is will dictate the direction you go.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
MRTMotorsports Enthusiast

MRTMotorsports

Posted
Posted

 

Are you offering a pre-order for the 6112's?

 

 

We are! There is a pre-order list about 70 deep. We arent taking any payments at this time, just collecting information so when we finally get them the process is easy. If youd like to get on the list please shoot us your full name, delivery address and email to [email protected] or via PM.

sbk12rs Enthusiast

sbk12rs

Posted
Posted (edited)

Just had my 5100's installed ... LOOKS GREAT AND RIDES AWESOME !

 

Its a tad stiffer , I expected that .... no body roll , not much of a nose dive when you hit the brakes , off and on ramps like its on rails .....

 

I really like these shocks , transforms the ride totally . Service manager at the Local Chevy Dealership loved them after being a bit of a skeptic . " Not many would change a shock on a NEW car "

 

My ride , 2016 Z-71

Edited by sbk12rs
  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,974
    Total Members
    8,960
    Most Online
    Gilkey96
    Newest Member
    Gilkey96
    Joined

  • Who's Online   5 Members, 0 Anonymous, 788 Guests (See full list)

  • Latest Articles

  • Posts

    • garagerog
      Low fuel pressure after installing new fuel pump

      By garagerog · Posted

      Replace the fuel pump with an OEM AC-Delco.
    • Gilkey96
      Low fuel pressure after installing new fuel pump

      By Gilkey96 · Posted

      Hello, first time posting here. I have an 03 Chevy 1500HD with the 6 liter gas engine. The truck ran fine until the fuel pump died on me and had to get it towed. Replaced the fuel pump with a precision pump from O’rileys and changed the fuel filter while I was there. The truck will run and drive now but it wants to idle around 500 rpm when in drive and it tries to stall if you touch the gas. It drives fine though, just doesn’t want to idle. Put a fuel pressure gauge on the rail and only have 50 psi. I guess these trucks should have 55-62 psi to run right. I thought the regulator might be the issue because when I would unplug the vacuum hose it jumped to 56 psi. Replaced the regulator and no change. The only thing I can think of is that I was sold a faulty fuel pump. Any help would be appreciated because I’d rather not have to take the bed off again if I don’t have too. Thank you!
    • diyer2
      AFM Experience

      By diyer2 · Posted

      I've been wrenching on GM trucks for 17 years. And I need to get something off my chest because it's been weighing on me for a long time. After all that time, all those motors, all those people standing in my bay, I've figured out there are really only two kinds of owners. The ones who already know about this. And the ones who are about to find out the hard way. A guy came into my shop a few weeks back in a 2018 Silverado 5.3. Sharp guy, maybe 35. Knew his truck cold. He'd been on the forums, read the threads, done his homework. He only rolled in so I could double-check a little module he'd already plugged in himself. Wanted a second set of eyes on it. Ten minutes, in and out, drove off happy. Two days later, a completely different story walked through the same door. Older fella this time, in a 2016 Sierra. Gorgeous truck, clearly babied, not a scratch on it. Wedding ring. Looked like a guy who took care of his stuff. He was in because his engine had started knocking on the way to work. And by the time I got the valve cover off, I already knew it was too late. Lifter collapsed. Cylinder 5. Camshaft chewed up. The whole top end shot. Same kind of truck. Same motor. Same roads, probably the same dealer. The only thing separating those two men was information. I've been at this since 2008, and I've worked on everything GM puts out. Silverados. Sierras. Tahoes. Yukons. Suburbans. Escalades. The 5.3 and the 6.2. Doesn't matter which badge is on the tailgate. They all carry the same problem. So here's the information one of those guys had and the other one didn't. It's called Active Fuel Management. AFM. GM started building it into their V6s and V8s back in 2007 to squeeze out a little better mileage on the highway. Maybe a mile or two a gallon. All to hit government fuel economy numbers. The way it works, the motor quietly shuts down half its cylinders when you're just cruising along. And the little lifters that pull that off have a tiny pin inside them that's constantly clicking in and out. Lock, unlock, lock, unlock. Hundreds of times a drive. Thousands of times a week. Eventually one of those pins wears through. The lifter drops. And it starts grinding the camshaft down like a chisel on butter. And what nobody tells you is that the shudder you feel around 40 or 50 mph? That's the system cycling. Every single time. Here's what really gets me. The pre-2007 trucks, the ones without AFM, they're bulletproof. I've got customers still daily driving them with 260,000 miles on the odometer. Not a problem in the world. GM took a perfectly good motor that would have lasted a lifetime and bolted this system onto it. And it is wrecking engines that should have run forever. The guys who hang around the forums already know all of this. So do the techs. They handled this years ago. They didn't sit around waiting for the dealership to mail them a warning letter, because that letter is never coming. It's the guys who figured somebody would've told them who end up on my lift. And I want to be clear, because this part matters. Maintenance has nothing to do with it. I've torn down motors with barely 30,000 miles on the clock. I pulled apart a Tahoe last summer with 24,000 on it. Practically a brand new truck. Owner had it less than a year. Spotless oil. Best synthetic money can buy, changed early every time. Made no difference. I've seen guys with full dealer records, every interval stamped. Made no difference. The oil changes were never the problem. The pin was. And no amount of babying that truck stops that pin from cycling every single time you drive. That's the part that eats at me. These are good motors. Take the AFM out of the equation and a 5.3 or a 6.2 will run 300,000 miles and never blink. So a few years ago I started telling every single owner who comes through my doors the exact same thing the smart guys already knew. Get yourself a FullForce disabler. It plugs right into the port under your dash. Couple of seconds and you're done. It just tells the computer to leave every cylinder running, full time. No more cycling. No more beating those lifters back and forth every time you turn the key. It doesn't reprogram anything. Doesn't touch your tune. And unplug it before a dealer visit and there's absolutely zero trace it was ever installed. I've had customers come back at 40,000, 60,000, 80,000 miles after I put one in. Zero issues. The trucks run smoother. And the lifters aren't getting beaten to death every single drive. I won't sit here and tell you it's magic. A lifter that's already damaged is a lifter that's already damaged, and this won't un-ring that bell. But it takes away the one thing causing all that wear in the first place. That's the whole game. You don't need a five-thousand-dollar delete. You don't need an expensive tune. You don't need to tear anything apart. You just need to stop the cycling. I'm not writing this for any company. I'm writing it because I'm tired of watching the guys who didn't know pay four and five figures for it. I'm tired of being the guy who has to break the news. I'm tired of knowing that the guys who did know fixed the whole thing for the price of a tank of gas, and the only difference was that somebody told them first. If you drive a Silverado, Sierra, Tahoe, Yukon, Suburban, or Escalade from 2007 or newer with a V6 or V8, you've got AFM. You've got those lifters, and they're cycling every single time you drive. So be the guy who already knew. Not the one I'm scraping metal out of next month. EDIT: A bunch of folks asked, so here it is. The one I put my faith in is FullForce. This is where to find it: https://www.tryfullforce.com/products/fullforce™-afm-dfm-disabler They back it with a 60-day guarantee too. I've handed out more than I can count and not one's ever come back to me. Not one. See less
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Thanks for following along. I'm not author material, my tenses are all over the place and an editor would have a heck of a time cleaning up after me. Reading and writing is still a fun pastime though.   My new scanner came in yesterday, wow, where the heck has this thing been?! It connects right up to the Blazer, there's all kinds of bidirectional tests like EGR activation and percentage, toggle the fuel pump relay, EVAP purge valve, IAC control, AC relay, reset the transmission's adaptive learning, toggle shift solenoids and TCC lockup, and I can reset fuel trims with the click of a button...all things I could have used over the last 60 days!   It's also telling me there is a stored code in the ABS module for front left wheel sensor open and something about the brake switch. The ABS dash light works. It illuminates normally during the self-test at key on/ start and that's it. I cleared the codes and will see if they set when I take it out later. That, and I'm going to get (hopefully) real data on timing and cam ******. The PID's are there.   I connected the tool to my truck...holy smokes. Newer vehicles make early OBDII vehicles look like 8-bit, pixelated, early Nintendo stuff. This? This is like wearing 3D virtual reality goggles playing one of those elaborate, cinematic video games with seasons and plots in comparison. There are SO MANY modules and SO MANY tests and SO MUCH data. There's a scanner sequence for filling the coolant...   End of the day, it's a tool with way more power than I need, but the versatility to do old and new is there (and I need an adapter to connect it to my OBDI Camaro). It will allow me to do the first pass of diagnosis when out-of-warranty vehicles need help, and it will enable more DIY maintenance like brake system bleeding, ABS bleed, etc. I probably over-bought here, but, mission is accomplished.   Enjoy your Sunday...I need to shut this machine down and go get ready for the week ahead.
    • MORSNO
      Which 2027 engine will you choose?

      By MORSNO · Posted

      Not that I've read, after all the issues they've had in the past I'm pretty sure they learned their lesson. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...