Jump to content

Denali cluster in SLT

NIXONRIDE

By NIXONRIDE
in Modifications & Accessories

 Share

Recommended Posts

SS502 Senior Enthusiast

SS502

Posted
Posted
13 minutes ago, GTPprix said:

So I can't sugar coat this LOL The website database is screwed up and while it is completely functional for initial ordering and order status notifications (which is all it really did anyhow) past that it does not allow a login. This will be remedied with the new website that is launching hopefully soon however as long as you keep an eye on your email and understand that your order will process within the time period stated on the auto responder you're golden and its the same scenario. 

 

To address the comments above there is obviously stuff left on the table, the main issue is money for the exact reason @RACERX7775 stated; no one wants to pay for that. My cluster for example does have some extra menus that are not factory but nothing (interesting stuff but nothing earth shattering) that I feel anyone would pay for the considerable extra labor that goes into adding them so we dont offer them. 

I bet some of us would gladly pay :D was gonna PM you but it's off and I certainly understand why LOL...remember I put the bounty out on the crap recirculate problem so I have some $$ to use elsewhere :thumbs:

  • Like 1
  • Replies 1.2k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

NIXONRIDE
NIXONRIDE

Thanks to Mr. Chris White I now have a Denali gauge cluster in my 2016 Sierra SLT. Once he did his programming it was plug and play. Everything works just like it does in My wife's 2016 Yukon Denali

GTPprix
GTPprix

You’ve been asking and we’ve been listening. Granted it took longer than anyone would have liked we are changing up our operations a bit to hopefully make things easier on everyone; especially the con

CaliBoy_661
CaliBoy_661

Well I got my Cluster already and already installed... here are some pictures from mine     Sent from my iPhone using Tapatalk

Posted Images

GTPprix Senior Enthusiast

GTPprix

Posted
Posted
Just now, SS502 said:

I bet some of us would gladly pay :D was gonna PM you but it's off and I certainly understand why LOL...remember I put the bounty out on the crap recirculate problem so I have some $$ to use elsewhere :thumbs:

The HVAC is nothing compared to this :)  You're talking "why not just buy a kia" kind of money LOL Stuff that we would do for say a 100+ vehicle fleet customer etc. 

  • Like 1
Bubba0214 Enthusiast

Bubba0214

Posted
Posted
48 minutes ago, GTPprix said:

So I can't sugar coat this LOL The website database is screwed up and while it is completely functional for initial ordering and order status notifications (which is all it really did anyhow) past that it does not allow a login. This will be remedied with the new website that is launching hopefully soon however as long as you keep an eye on your email and understand that your order will process within the time period stated on the auto responder you're golden and its the same scenario. 

 

To address the comments above there is obviously stuff left on the table, the main issue is money for the exact reason @RACERX7775 stated; no one wants to pay for that. My cluster for example does have some extra menus that are not factory but nothing (interesting stuff but nothing earth shattering) that I feel anyone would pay for the considerable extra labor that goes into adding them so we dont offer them. 

Chris could you message me on here? I just wanted to double check and make sure you received my modules safely. Thanks!

RACERX7775 Enthusiast

RACERX7775

Posted
Posted
4 minutes ago, Bubba0214 said:

Chris could you message me on here? I just wanted to double check and make sure you received my modules safely. Thanks!

How did you ship em? I shipped mine ups and tracking is a wonderful thing. Even says "inside delivery".

Bubba0214 Enthusiast

Bubba0214

Posted
Posted
48 minutes ago, GTPprix said:

So I can't sugar coat this LOL The website database is screwed up and while it is completely functional for initial ordering and order status notifications (which is all it really did anyhow) past that it does not allow a login. This will be remedied with the new website that is launching hopefully soon however as long as you keep an eye on your email and understand that your order will process within the time period stated on the auto responder you're golden and its the same scenario. 

 

To address the comments above there is obviously stuff left on the table, the main issue is money for the exact reason @RACERX7775 stated; no one wants to pay for that. My cluster for example does have some extra menus that are not factory but nothing (interesting stuff but nothing earth shattering) that I feel anyone would pay for the considerable extra labor that goes into adding them so we dont offer them. 

Chris could you message me on here? I just wanted to double check and make sure you received my modules safely. Thanks!

Bubba0214 Enthusiast

Bubba0214

Posted
Posted
3 minutes ago, RACERX7775 said:

How did you ship em? I shipped mine ups and tracking is a wonderful thing. Even says "inside delivery".

Ups. It said delivered inside as well. It said “Shaw” signed for it.

pgamboa Senior Enthusiast

pgamboa

Posted
Posted

The shipping address for WAMS is likely a staffed mail stop location. Like a FedEX/UPS or USPS business location where you can buy a mailbox.

I have a mail stop as well for packages that I visit 3x a week for package pickup and drop off.


Sent from my iPhone using Tapatalk

  • Like 1
SASK_RT Enthusiast

SASK_RT

Posted
Posted

I want to send a big shout out to Chris for helping me with the logistics of getting an eBay cluster shipped to him and then up to me in Canada.  His communication and understanding was awesome.

I love the look of this cluster in my Regular Cab :D.

 

I'm hoping that someone comes up with a kit to make the HUD look factory.  I'd have no issues cutting the dash to get the module in but I'd like to make sure its looks proper when its all finished.

  • Like 2
Dana Helmly Jr. Enthusiast

Dana Helmly Jr.

Posted
Posted

I ordered a Denali cluster and when I Recieved it the lens was cracked and has a chemical stain on it. Can’t seem to find just the lens for it. Does anyone know if the factory SLT lens fits the Denali cluster? 

SS502 Senior Enthusiast

SS502

Posted
Posted
8 minutes ago, Dana Helmly Jr. said:

I ordered a Denali cluster and when I Recieved it the lens was cracked and has a chemical stain on it. Can’t seem to find just the lens for it. Does anyone know if the factory SLT lens fits the Denali cluster? 

I would ask @pgamboa but I’d really be surprised if it wasn’t a direct swap. The only difference that I’m aware of is the cluster panel inside the whole assembly. I doubt GM or any manufacturer would spend the extra money or design a lens just for one model...not saying it doesn’t happen but I seriously doubt it on these trucks. 

RACERX7775 Enthusiast

RACERX7775

Posted
Posted

Im sure you can take yours off and put it on the Denali cluster. But be careful, they are VERY brittle. 

Jchoi Enthusiast

Jchoi

Posted
Posted
On 3/21/2019 at 2:56 PM, GTPprix said:

The HVAC is nothing compared to this :)  You're talking "why not just buy a kia" kind of money LOL Stuff that we would do for say a 100+ vehicle fleet customer etc. 

Sent you an email Chris. @GTPprix

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,962
    Total Members
    8,960
    Most Online
    contrabombarde
    Newest Member
    contrabombarde
    Joined

  • Who's Online   2 Members, 0 Anonymous, 1,410 Guests (See full list)

  • Latest Articles

  • Posts

    • richard wysong
      Needing this part.

      By richard wysong · Posted

      Still looks like a rivet to me in the pics, I don't see a nut and none of the pics show the head of the screw. But if you says so.....
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all the help so far!   I did try right from 2026 right down to 2021, and only from 2023 down lets me select the option for tire psi change, but I get the vehicle not supported error!   I'll definitely try it under Chevrolet after work today, and I'll get the sensor number from gm for my truck tire sensors. And I'll let you know if it works for me under Chevrolet!   And if that doesn't work, I'm going to guess that what @Atlas said about maybe I have a different body control module could be true!  
    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      From where I'm sitting this sounds like a compatibility problem. I'm assuming the 2007 was a 900-series truck, and not an 800-series (they were sold side-by-side in dealerships that model year), since it starts and runs.   This is why I HATE post-2006 vehicles. Everything becomes a huge problem when you try to keep the thing running for longer than the manufacturer has designed it to.    I can't remember when Global-A architecture started - either '10 or '11. For your sake, you had better hope it's '11, or you're going to be spending some BIG money to correct this cluster-eff. That's something you need to find out before doing anything else. You may have several computers bricked ... but the fact that it runs tells me you MIGHT be ok here.     EDIT: Just did a quick refresher. You're screwed. This is Global-A. The 2 systems are NOT compatible in the slightest. Once you get the correct engine in there that IS compatible, you're going to need to see how many computers are locked. Absolute NIGHTMARE to straighten out, too. Your buddy might be better off cutting his losses and finding something else.   Welcome to post-2006 vehicle electronics. This is why I quit the industry, and drive nothing built after 1994. This stuff takes all the fun out of wrenching!  
    • bwiese
      Show Us Your 2019 & Up T1 Pictures !

      By bwiese · Posted

      Recently acquired new 2026 Silv. 1500 WT  - L3B + 4WD,  std cab + std bed, in (duh!) Sierra White. Upgrades: replaced 'steelies' w/  Vision "Flow" black alloys,  17x8.5"; HDX nerf bar w/steps (black powdercoat); Weatherguard large/deep alloy saddle toolbox; Michelin fitted bedmat (sale, perfect fit) Weathertech door sill guards TBD: rear wheebox liners 4x black fender arch trim - searching for best  (Putco: chrome only; not looking for flares either!) -Bill    
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      True, hard to say what differences there may or may not be between Chev and GM as well as a production year or mid year part change either.    I just found it odd that under the Sierra choice on the Autel that many of the last few years of production year did not include the choice of changing the tire pressure but if that is an Autel thing or a GM thing as to why the choices were not there. Knowing what tpms sensors are on the truck should give some guidance into which choices on the tool even make sense to try as I wouldn't give up just yet with the tool but I guess he will see what if anything he comes up with if he finds out a bit more info and tries a few more things on the Autel. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...