$50 and under modifications

[caskey_b]

 

looks good. How do you like your OPT7 HID / Led's ? Would you do it again ?

 

output and pattern of the HI/LOW HIDs is great... i am having some random issues of one low beam not firing on every once in awhile.. sometimes pass side.. sometimes driver side... BRAND NEW BULBS... harness and capacitors hooked up...

 

the ballasts, harness and capacitors are pushing 2 years old... not sure if thats the reason or not... but i have the new Opt7 FluxBeam X LEDs that will be at my door tomorrow that I am going to try in the low beams and see how they are

 

 

 

Which fuse did you use?

 

there is a 10amp misc ignition fuse under hood... cant remember off top of my head... but i will try to get a pic of it ...

 

PM me if you are interested and ill send the pic directly to you

[caskey_b]

2014 Silverado.... fuse #39 "Misc Ign" 10amp under the hood

 

this pic looking at fuse box standing by left front tire

 

[Justin Nachazel]

 

looks good. How do you like your OPT7 HID / Led's ? Would you do it again ?

I have the same set up for my headlights. Great lights, the fans can get loud sometimes but not to the point where you hear it that much in the truck, they have horrible horrible customer service. One light went out while warranties and it took a month to get a replacement.

[slj2008]

I have the same set up for my headlights. Great lights, the fans can get loud sometimes but not to the point where you hear it that much in the truck, they have horrible horrible customer service. One light went out while warranties and it took a month to get a replacement.

 

ON your OPT7 lights , any problem putting the dusk cover back on ????

[jimmyboy8301]

 

Black vinyl

 

 

2017 Chevy Silverado LTZ Z71 6.2L

4.5" Zone

22x10 AF Grips

33x12.5 Nitto Ridge Grapplers

Instagram @wildchevys

Edited October 1, 2017 by wildchevys

[Justin Nachazel]

 

ON your OPT7 lights , any problem putting the dusk cover back on ????

Yes it’s tough, you have to pack all the cords inside before you put the cover on but it will fit.

[Ravenkeeper]

 

output and pattern of the HI/LOW HIDs is great... i am having some random issues of one low beam not firing on every once in awhile.. sometimes pass side.. sometimes driver side... BRAND NEW BULBS... harness and capacitors hooked up...

 

the ballasts, harness and capacitors are pushing 2 years old... not sure if thats the reason or not... but i have the new Opt7 FluxBeam X LEDs that will be at my door tomorrow that I am going to try in the low beams and see how they are

 

 

 

there is a 10amp misc ignition fuse under hood... cant remember off top of my head... but i will try to get a pic of it ...

 

PM me if you are interested and ill send the pic directly to you

 

A co-worker and I were just discussing the OPT7 FluxBeam X LEDs, I'm going to get some soon. He has them on his Explorer and both of his motorcycles, and loves them.

[Sierra 5.3]

Has anyone tried OPT7 HID kits? Specifically the BOLT AC Slim series.

[Paintor]

Here's a $1 Mod I found.......but think I would use 3M vinyl sticker ....cleaner and could be removed....

 

 

[Penguin VII]

Here's a $1 Mod I found.......but think I would use 3M vinyl sticker ....cleaner and could be removed....

 

Thats a cool idea. Plastidip or vinyl would work great for this. Hmm...

[SuperSierra]

Here's a $1 Mod I found.......but think I would use 3M vinyl sticker ....cleaner and could be removed....

 

 

I used plasti dip just because I couldn't find a good vinyl that was just red and not carbon fiber looking.

 

 

Sent from my iPhone using Tapatalk

[Bahemon]

 

Made a mesh insert using black steel mesh I found in the gutter section at Lowes. It takes 3 pieces for about $12 total. I wasn't a fan of the large openings and when I took the grill off I had a nice pile of big bugs and 1 bird at the bottom of the radiator.

 

Once you get the grill off their are 6 plastic pins to get the air shroud off the back of the grill. I cut to fit and used .032 safety wire. I drilled some holes in the back to get a secure point an that might turn off some people.

[caskey_b]

 

A co-worker and I were just discussing the OPT7 FluxBeam X LEDs, I'm going to get some soon. He has them on his Explorer and both of his motorcycles, and loves them.

 

I just put the FluxBeam X in my low beams (H11).... very impressed so far!!! ZERO light scatter and I have halogen reflectors

 

 

 

Has anyone tried OPT7 HID kits? Specifically the BOLT AC Slim series.

 

I had the Opt7 Canbus on my 14 Silverado... had some intermittent issues with only 1 light firing on the low beams (it is a set i have been using for about a year on another vehicle... so could be ballasts/relay going bad)... great light output from them though.....

 

low beams (Opt7 Canbus 5000k)

 

high/low beams (both Opt7 Canbus 5000k)

 

both low beam pics are from exact same location... so you can compare HID vs LED

Edited October 7, 2017 by caskey_b

[SuperSierra]

I had to paint my grill after I used the 3m adhesive remover, stained my grill white

 

 

 

Painted it all black and looked plan so I decided to try something crazy for a bit.

 

 

Sent from my iPhone using Tapatalk

[SSam]

I had to paint my grill after I used the 3m adhesive remover, stained my grill white

 

 

 

Painted it all black and looked plan so I decided to try something crazy for a bit.

 

 

Sent from my iPhone using Tapatalk

I like it!

 

-S