Jump to content

Recommended Posts

Posted

Most insurance companies won't total a newer vehicle unless the loss value exceeds 50% of the vehicle value. If it really bothers you, maybe instead of having the other insurance company pay the body shop, they cut you a check and you get a salvage value of your truck, take that money and get something new. Like everyone else said, even if you get your truck fixed flawlessly, it's value has tanked. Either way you're out money long term.

  • Like 1
Posted

Just be pushy about the diminished value claim. They hit you and caused you a loss. You need to be made whole.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted

Generally you file diminished value not on your insurance but on the other guys insurance. Your insurance has no obligation for diminished value. Whether you can do diminished value is also state specific.

Posted

Hmm, before you're so quick to judge and tell him where to park, let me know how you think parking in my driveway turned out?

 

20151116_075041_zpsfyidl6wc.jpg

 

In regards to the OP's issue, new frame will be perfectly fine. I'd rather that over having the body shop try to straighten the old one out.

 

Holy $£\+! Guessing the Tahoe was totaled. That sucks :-(

Posted

We replace frames at our shop on a monthly basis. Right now we have a 2015 canyon getting swapped. It's not really that crazy of a job. The tech gets paid a lot but it's only about 2 days of work.

  • Like 1
Posted

Be sure to ask for diminished value. Carfax and others will have a record of MAJOR damage. When its time to trade, bend over.....Vaseline not included.

I absolutely agree with the above info!

Posted

Replace Frame?... about like coming down the assembly line all over again, without the order and precision in which things come on. I'd hope to think it could be done but my gut says it would rattle and squeak more than a stone thrasher. All kinds of rubber parts to aid in noise dampening, wire looms, dashboard rattles.... chassis parts, engine, tranny, brakes, entire front end + more. Hum--. seems overwhelming.....

Posted

If you're really worried about the quality of work being performed, Take the check and throw a frame under there yourself. Problem solved. Probably buy a good amount of goodies too with the amount of $$ saved not having to pay their labor rate.

Posted

Holy $£\+! Guessing the Tahoe was totaled. That sucks :-(

Yes, unfortunately. drunk pos in a saturn went airborn and pushed my tahoe into the accord next to it. drove off and they found him about 8 hrs later still intoxicated.

Posted

Had my 2014 Silverado rear ended twice and both times a lot more damage than is what on the back of yours and they straightened the frame both times.The first time it pushed the bed of my truck into the back of the cab and there was never a mention of replacing the frame so I would think this body shop might be trying to make some extra money here.I would rather have the frame straightened then everything switched to a new frame.i mean you are talking about messing with almost every system on that truck to switch everything out.

Posted

Had my 2014 Silverado rear ended twice and both times a lot more damage than is what on the back of yours and they straightened the frame both times.The first time it pushed the bed of my truck into the back of the cab and there was never a mention of replacing the frame so I would think this body shop might be trying to make some extra money here.I would rather have the frame straightened then everything switched to a new frame.i mean you are talking about messing with almost every system on that truck to switch everything out.

Interesting argument regarding frame repair vs frame replacement! The success of both options are dependent on the skill of the individuals making the repair. Assuming all work is done by skilled and competent technicians, I would rather buy a used vehicle with a replaced rather than straightened frame.

  • Like 2
  • 4 weeks later...
Posted

So after two days of battling back and forth with the insurance adjuster they still won't total it out. It's getting a new frame unless I want to get an attorney. And that's not me.

 

My local dealership is medium sized and said to let the body shop do the work. They contract it out to a company that specializes in it. Two or three guys do it in one day. $3k for the frame and $2k in labor. $7k for all the rest of the body work. All OEM Parts. I insisted.

 

He really didn't care about "diminished value". Has anybody else ever been successful with a diminished value claim? I'm sure it will now be on carfax. And most people don't want to buy a vehicle that had frame damage. This whole situation sure doesn't seem fair considering I wasn't even in my truck when it was hit.

 

Just curious, what state are you in? Frame replacement comes with big issues in Texas( I am a licensed adjuster here)

  • 2 weeks later...
Posted

 

Just curious, what state are you in? Frame replacement comes with big issues in Texas( I am a licensed adjuster here)

I just got in a accident in Texas and plan on asking for a diminished value claim. What are chances of it getting accepted? It was 100% the other drivers fault with police report to back it up. It just happened this Saturday waiting on Monday to meet/speak to adjuster. Todays Sunday

 

 

Posted

My experience is that YOU want to be in control of what shop prices the work and DOES the work. If you want a properly repaired truck YOU need to take charge and find the people that will do the work to actually make the vehicle back to NEW condition. Most Auto insurance companies will try to steer you to the cheapest shop as it is in their best interest to have bubba in the back room hammer it and add a bit of bondo and paint.

It is a bit of work for you to do but do not trust your insurance company to have your best interest at heart in this situation. You will have to be firm at times, do not let them walk on you like a welcome mat.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,897
    Total Members
    8,960
    Most Online
    ncleg
    Newest Member
    ncleg
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,260 Guests (See full list)


  • Latest Articles

  • Posts

    • Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...