Jump to content

Recommended Posts

Posted

I think a lot of complaints about the wipers are actually due to a contaminated windshield. I've found an excellent product for deep cleaning the glass (cleans the rubber on the wipers too). It's Bon Ami cleanser. You'd think it would scratch the glass but it doesn't. GM actually used to recommend it.

 

Wet down the glass and sprinkle the Bon Ami pretty heavily and then scrub with a cloth. You'll feel the cleanser digging in. When you rinse it off you can see how the glass is sheeting off the water. If it doesn't sheet off it means you need to scrub some more. Then take the same cloth and scrub the rubber of the wipers. It's almost a miracle how well this works. The windshield and wipers are clean like new and work nice and smooth.

 

Here is a picture of what to buy. Get the 1886 formula. I found mine at a mom & pop hardware store. Definitely don't use any other kind of abrasive cleanser - only Bon Ami.

 

WP_20160813_004_zpsrqrcbxs4.jpg

  • Like 1
Posted (edited)

too many to quote - but x 6 or 7 or 8 or whatever on rain-x. i've used it on headlights , side view mirrors and everything - really helps shed water and in not so nice months slush snow and crap off , coupled with my OEM blades i have zero issues. apply it twice a year once in spring once in fall. best 6.99 you can spend IMO. i will note my truck also sits in my garage when not in use so its not subject to elements deteriorating them as mentioned earlier too.

Edited by AdamZ71
Posted

Before you buy anything, always look at amazon. It saves me a lot of money every year.

 

Advance Auto isn't too bad if you order online and pickup in store. If you Google it you can usually find a coupon for 30% off when you order online.

Posted

I agree with Dale_K on cleaning the glass. I have not tried Bon Ami but I use Rain-X X-treme Glass cleaner a few times a year. I got it at Walmart and it does a great job getting off all the old grime and film.

 

419ksUATwGL.jpg

Posted

Check out the Goodyear Hybrid blades at Costco for $7.99 each. I've installed them on my sons' and daughters' vehicles recently and they fit and work well (obviously better than stock). For you Costco Special Owners, this is a particularly good fit.

Two times a year Costco offers a buy one get one free on these blades....time to stockpile....Goodyear instructions and numerous Mickey Mouse mounting adapters can be confusing and look like they'll fly off with the first swipe.......BUT they hold firmly and wipe better than the OEM....great blades.

  • 1 year later...
Posted

I got my 2018 a month ago and have gone just under 1000 miles now at least half in the rain.   The original wipers left streaks and shuttered so I did research and decided to get the Michelin Stealth wipers for their snow and ice performance in addition to rain.  Living in Michigan we get a little of everything.   I drove for the first time with the new blades today and they are so much better, no streaks, no shuttering, stupid quiet, and I think they look nicer too.  The original blades were sticky feeling and almost looked like a half circle after taking them off.  For 30 bucks this was one of the best mods yet.  Hopefully they hold up and do as well with snow and ice as with rain.

  • 1 year later...
Posted

Here's one out of the box for ya.  Take a clean old bed linen sheet (white is preferable) and makes a small rag.  Spray some lacquer thinner onto the sheet rag.  Run the lightly soaked cloth along the square edge of the wiper blade.  You'll see a coating of black (rubber) removed from the blade onto the rag.  This works best if you remove the wiper blade and work under a nice bright shop light or outside in the sun.   Lacquer thinner evaporates very quickly so work fast.  Do not scrub.  Run the whole length of the blade nor more than twice.  Wear a nitrile glove or something.  Giggle if you will but I'm still running my 2015 OEM's on my 2500HD in Maine with all the salt, sand, and other road crap.  Want to see the results of your work?  Take a very strong lens (old camcorder or camera) and look at the wiper cleaning edge before and after.  It makes a nice crisp edge.  It typically is very small chunks of pitch (pine trees in Maine) the collect on the cleaning edges of the rubber that make the streaks.  The rubber needs to be in good condition for this to work.  If it's cracked, separated, folded over, etc. you need new blades.  All the best...

  • Like 1
Posted

GM must use different wiper blade suppliers. I have never found a blade that would last as long as the original ones on my 2015 Silverado, built at Flint. I hate the adapters and find them inferior to direct fit blades. I have used Bosh Icons and they were average life. I am now using Trico direct fit, they work good an are quiet.  I wonder how long these will last?

Posted (edited)

I don't know if it's the area I live in (St Louis MO) or just my luck, but I have never had a wiper issue with my 2016 Sierra. I use rain-x 2-in-1 wiper fluid and rain-x quantum blades. I wash my truck regularly and replace my blades annually. Maybe that's why I haven't had an issue, but even after a full year of use through 4 seasons I don't have much streaking or chatter from the blades. I just replace annually because I'm super picky when it comes to visibility. Windshield gets replaced a soon as it's cracked or gets a large chip, non-working headlights are replaced asap, and the windshield is always clean. Brakes and tires are another area I don't let get to a certain point.

Edited by midwestdenaliguy
  • 1 year later...
Posted
3 hours ago, Paul Pierce said:

I still have the original blades on my 2017 Silverado,  no streaks, or chatters, go figure?

Same here, before my recent service last month - I had them changed, just because, even though I really didn't need it.

Posted

Hard to beat the OEM's, also hard to pull out the VISA when they tell you how much🤔😬, but worth the expense.

 

 

  • Thanks 1
Posted
28 minutes ago, JimCost2014 said:

Hard to beat the OEM's, also hard to pull out the VISA when they tell you how much🤔😬, but worth the expense.

 

 

Yeah, it ain't cheap but, it's cheap insurance, so to speak. :)

 

IMG_0529.jpg

  • Like 1
Posted
10 minutes ago, MikeBMW said:

Yeah, it ain't cheap but, it's cheap insurance, so to speak. :)

 

IMG_0529.jpg

Yes sir, think that is what I pay here in Washington, but put on myself.

The passenger side entertains the neighbors, as I use some "colorful" language to get the old one off. Wife's Tahoe much easier on both front ones.

 

Found a You Tube video on the rear for the Tahoe, some fellow in the worst Christmas sweater ever changed his in 57 seconds, showed all of the tricks, now it is a breeze to swap out.

  • Thanks 1
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   0 Members, 0 Anonymous, 2,759 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • Paid $2.72 for E85 today.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...