Jump to content

Wireless charging

jrhoyt84
 Share

Recommended Posts

lapoolboy Senior Enthusiast

lapoolboy

Posted
Posted

Just for reference....recalls are reserved for issues that are deemed to potentially compromise safety.  Wireless charging hardly qualifies.

 

You can probably bark up the right tree long enough and loud enough to get GM to give you a module as a goodwill gesture.  I tried for a while and got tired of having to re-explain the issue to every single person I spoke to and they just kept referring to the "approved devices" list anyway.

 

I just spent the 100 bucks and bought my own module.  Been happily charging ever since!

  • Like 1
  • Replies 557
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Ed36rgz71
Ed36rgz71

Have S8+ with a case did this quick and easy just flip the rubber part and you're good to go    

8lugCT
8lugCT

Because the charger is positioned toward the back, and with the way the pad is, the bumper on the backside pushes the phone forward away from the charger. So reversing the mat allows the phone to be p

David Ulbrich
David Ulbrich

The 2018 works just fine with my iPhone X.  I just went to the dealership and tested it out.  I got the part number for the 2018 wireless charger module which is 13507652.  The parts guy said that it

Posted Images

pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Phil let me know when you have an adapter available again.
Whether I get a 2018 module out of pocket or under warranty this will definitely be replaced.
This should honestly be a recall for our trucks, very dishonest to advertise something and to become aware it isn't working and then even try to  cover it up with an "Approved Devices" list post date.

Mouser updated the Backorder status and now says they are backordered until May! I am on vacation on Thursday 2/22 - 2/28. When I get back, I am exploring an alternative method for a PnP harness.


Sent from my iPhone using Tapatalk
NorCalSLT Enthusiast

NorCalSLT

Posted
Posted (edited)
9 minutes ago, lapoolboy said:

Just for reference....recalls are reserved for issues that are deemed to potentially compromise safety.  Wireless charging hardly qualifies.

 

You can probably bark up the right tree long enough and loud enough to get GM to give you a module as a goodwill gesture.  I tried for a while and got tired of having to re-explain the issue to every single person I spoke to and they just kept referring to the "approved devices" list anyway.

 

I just spent the 100 bucks and bought my own module.  Been happily charging ever since!

You are right with regards to a safety recall, it should be a service bulletin to be specific.


Its not about the $100 to me. Its about the fact they sold brand new trucks with the wireless charging feature that was under-engineered by any wireless charging standard, Ive never seen a single coil in ANY wireless charger device, and used it as a modern selling point and then act like its not their problem and try to create deniability with some "approved devices" list over a year later. And they know that they were faulty, because the very next year are putting in standard 3 coil devices that work as they should rather than more single coil dogshit ones. Its got me more heated than the wonderful seats set to high setting in our trucks.

Edited by NorCalSLT
Havasubum Enthusiast

Havasubum

Posted
Posted

Just installed my 2018 charging module and wiring harness furnished by pgamboa.  Thanks to everyone for pointing me to this solution.  The charger works on my iPhone X like a champ even with the Otter Box Defender.

kittmaster Enthusiast

kittmaster

Posted
Posted

Hi All,

 

I signed up specifically to respond to this topic. I have an SLE '16 Yukon XL that didn't come with wireless charging. I have the service manuals for it and the connector that is use to connect the charge unit is not present. I seems I would need an upgraded harness to get the added connector. I hand verified that the connector is not present behind the rear trim console piece.

 

My question is, has anyone attempted to install into a truck that didn't have the OEM to start with and if so did it work and the charge bolt show up on the screen after the upgrade? I know the signal travels from the wireless module to the BCM to the HMI then to the display.

 

Thanks,

Chris

  • Like 1
jhbrennan Enthusiast

jhbrennan

Posted
Posted
14 minutes ago, Sidewayz said:

My module shipped today. Now to figure out the wiring harness

Me too - never thought the module would be here before the wiring harness - guess we just have to be patient with Phil and his suppliers.

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Me too - never thought the module would be here before the wiring harness - guess we just have to be patient with Phil and his suppliers.

Just one supplier... Mouser. Lol. I am on vacation tomorrow, but when I get back, I’ll be looking at a different mating connector elsewhere and will try to source that if it’s available.

I can make the Splice version now, Like i did when I first started this project.


Sent from my iPhone using Tapatalk
  • Thanks 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Hi All,
 
I signed up specifically to respond to this topic. I have an SLE '16 Yukon XL that didn't come with wireless charging. I have the service manuals for it and the connector that is use to connect the charge unit is not present. I seems I would need an upgraded harness to get the added connector. I hand verified that the connector is not present behind the rear trim console piece.
 
My question is, has anyone attempted to install into a truck that didn't have the OEM to start with and if so did it work and the charge bolt show up on the screen after the upgrade? I know the signal travels from the wireless module to the BCM to the HMI then to the display.
 
Thanks,
Chris

Chris,

I landed the charge indicator circuit (lightening bolt icon) into the BCM and it doesn’t show the icon on the radio when charging.

If you didn’t have wireless charging before, I am ask looking at a harness alternative to go inline to the rear cigarette light plug.

You can certainly add it. If you already have a center console, remove the main grey 42-pin plug at the front. Pin #7 is allocated for the charging matt power.


Sent from my iPhone using Tapatalk
BlkSS Enthusiast

BlkSS

Posted
Posted
34 minutes ago, pgamboa said:


Just one supplier... Mouser. Lol. I am on vacation tomorrow, but when I get back, I’ll be looking at a different mating connector elsewhere and will try to source that if it’s available.

I can make the Splice version now, Like i did when I first started this project.


Sent from my iPhone using Tapatalk

I recommend to everyone to just get the splice-in pigtail so you don't have to wait.  No one will ever tell and it works great.  Just takes a little more "work" it install.

20180121_173633.jpg

  • Like 1
Rob Okray Enthusiast

Rob Okray

Posted
Posted

This is one option my 2015 SLT does not have. If I order a module an get power to it, (tons of power in my console) will it fit under my lid?

MRL_Sierra16 Enthusiast

MRL_Sierra16

Posted
Posted (edited)

BlkSS - based on my experience and the fact that the vehicle still has a warranty, waiting for the proper pigtail makes switching back easy if needed.  Not to mention the ease of the switch over.  Was worth the wait for me.  YMMV.

Edited by MRL_Sierra16
  • Like 1
kittmaster Enthusiast

kittmaster

Posted
Posted
3 hours ago, pgamboa said:


Chris,

I landed the charge indicator circuit (lightening bolt icon) into the BCM and it doesn’t show the icon on the radio when charging.

If you didn’t have wireless charging before, I am ask looking at a harness alternative to go inline to the rear cigarette light plug.

You can certainly add it. If you already have a center console, remove the main grey 42-pin plug at the front. Pin #7 is allocated for the charging matt power.


Sent from my iPhone using Tapatalk

So the icon won't show even if the pin is grounded? I wonder if the BCM has programming that says to ignore it. I always figured to pick up 12v and ground from the lighter if I did an aftermarket version but the charge indicator is something I'd like to see work. I will review the connects you mentioned......have a safe vacation. Best, Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,947
    Total Members
    8,960
    Most Online
    Sothpaw27
    Newest Member
    Sothpaw27
    Joined

  • Who's Online   5 Members, 0 Anonymous, 692 Guests (See full list)

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Thanks - I wasn't quite caffeinated this morning. 2:1 makes sense, turning the crankshaft 360 degrees will turn the cam 180 degrees, and had I done that, the cam's dot would be at 6 and the crank's at 12 again.   I went ahead and took the sprocket off anyway, aligned everything dot-to-dot including the balance shaft just for s&g. I'm glad I did because I discovered no Loctite on the timing sprocket bolts. Maybe it's not required, but at only 20 ft-lb torque spec, those bolts aren't in there very tight. Cleaned and reassembled with some thread locker and torqued.   A general observation: Less is more with RTV. If a little doesn't stop a leak, a LOT probably won't, either. RTV is thinly veiled revenge, in a tube...      
    • richard wysong
      Wow I'm in a pickle. (Broke down truck) and a story.

      By richard wysong · Posted

      The timing marks are ok, that is #1, you can turn it over until they line up and it won't change anything, the crankshaft turns twice for every camshaft revolution, I have always set up SB Chevs as your pic shows using a straight edge
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Someone's been here before.... There is a receipt for a 3-piece timing set, purchased earlier this year.   Is this picture something, or, nothing?   I have the timing cover off and my crank is perfectly TDC and the keyed gear's locating mark is dead on 12 o'clock.   The cam gear locating mark is also at 12 o'clock. Now, I'm not an expert, but all the install guides say the two locating marks should meet and be perfectly aligned when installing a timing set. The mark on the crank should be dead on 12:00 and the cam gear's mark should be dead on 6:00, and both marks should be perfectly vertically aligned.   I believe the timing gear is keyed or has a dowel that ensures it can only be installed on the cam in one position, so I have to believe the cam is out of phase somehow. At the very least, with a triangular bolt pattern, it can only be installed in one of 3 different positions.   Before I pulled the front cover, the truck was running alright, no service engine soon lights except an occasional P0172 / rich condition. Timing -16 timing at idle (should be +16), and total -35% fuel trim, two conditions I haven't been able to figure out.   In related news, my injector tested pretty well, wasn't leaking, but I had it rebuilt anyway, and it's on it's way back to me.         Along with this discovery, the good and bad:   Good: The oil pan seal appears undamaged.   Bad: -The timing cover has been reused, and the positioning dowels have been broken. That could explain some of the leaking. -Some kind of white paste or grease was used to try to seal the oil pan seal and timing cover (since wiped off..). -Then, someone globbed silicone all over the front of the cover and also buried the ckp sensor in it. But, they didn't put any inside the cover or use RTV to try to seal the oil pan seal with the timing cover (good).
    • Grumpy Bear
      PF63 Oil Filters Going Away?

      By Grumpy Bear · Posted

      The guy that owns K&P filters last I checked in with him has over 300,000 miles on his Dodge base Hemi using his own 35 micron absolute stainless mesh filter from its first oil change.    The GM study I've posted a dozen times shows the relationship in engine life based in multiples of base units, not miles or years. That is the base unit is the number of miles the motor ran using the reference filter efficiency.    The above two paragraphs dismantle anecdotal arguments IF one changes oil often enough to prevent particle formation and the motor is in otherwise good shape. That is not full of silica (no air filter) or suffering a metallurgical issue that is not part of the lubrication discussion. Poor heat treat in example.   Data from UOA's I've reviewed from more than a few engines can show remarkably broad variations in oil cleanliness using the exact same filter over the course of an engines life.     Lastly there is the common sense of it. Wear debris WILL circulate the engine BEFORE it ever sees a filter in route to that filter and WILL harm the pump which NEVER sees filtered oil.    Alpha question then becomes, given the facts, how long do you believe is a reasonable service life from a vehicle you are certain you will not pass down? That is the junk yard will be it's resting place when you're done with it? (the moral issue most don't care about).    Omega question is then how diligent are you prepared to be in general mechanical, air & oil maintenance? Preventing particulates and keeping them sufficiently dilute; preventing the precursors from generation, amalgamation and precipitation.    If I get a good look at the engine bay of a vehicle I have a fair idea of the owners commitment to the inside of the power train. That 30 micron WIX is still more efficient than a sieve.                 
    • Tyler Gibbs
      PF63 Oil Filters Going Away?

      By Tyler Gibbs · Posted

      It also depends on what criteria someone is using for “best” when talking filters.  Are we going off best efficiency?   Best quality/QC?  Etc. because the two may not mutually exclusive.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...