Jump to content

Wireless charging

jrhoyt84
 Share

Recommended Posts

Nitrousbird Enthusiast

Nitrousbird

Posted
Posted
8 hours ago, mn camper guy said:

What does this kit provide for you over what is in the truck already? Or is this kit only for those that don't have wireless charging in their truck?

I have a 2017 Sierra, would this fix my pixel3 charging issue?

You likely need what P/N is for the 2018 module.

 

That said - why bother?  You can't do wireless Android Auto.  Just plug your phone in and be done with it.

  • Replies 557
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Ed36rgz71
Ed36rgz71

Have S8+ with a case did this quick and easy just flip the rubber part and you're good to go    

8lugCT
8lugCT

Because the charger is positioned toward the back, and with the way the pad is, the bumper on the backside pushes the phone forward away from the charger. So reversing the mat allows the phone to be p

David Ulbrich
David Ulbrich

The 2018 works just fine with my iPhone X.  I just went to the dealership and tested it out.  I got the part number for the 2018 wireless charger module which is 13507652.  The parts guy said that it

Posted Images

pewterliftedz Enthusiast

pewterliftedz

Posted
Posted (edited)
10 hours ago, mn camper guy said:

What does this kit provide for you over what is in the truck already? Or is this kit only for those that don't have wireless charging in their truck?

I have a 2017 Sierra, would this fix my pixel3 charging issue?

Sent from my Pixel 3 using Tapatalk
 

My 2017 factory wireless charger would not charge my iphone 8 plus, so I upgraded to the 2018 updated unit for $65 which does charge my phone now.  And yes it would most likely solve your wireless charging issue.

 

Now that I have 2 chargers I can have my phone connected to apple car play, and my wife can still charge her phone on the wireless pad.

Edited by pewterliftedz
bsprtsgrp Enthusiast

bsprtsgrp

Posted
Posted

My 2017 Yukon Denali is doing the same thing; it will not charge my iPhone 7 or X. Charging bolt comes on for a couple of seconds then goes off.

 

There are a couple of ways to do this from what I have found; swap out the module to an 18' (part number 13521066) and modify the 3-wire connection from your 17' to it, purchase a retrofit kit from Infotainment that has the connection extension already modified with the module for you, OR (and I have yet to confirm this) purchase an entirely new Center Console Armrest Assembly from GM that includes the new module and wire connection to your vehicle.

 

Has anyone here purchased an entire new Center Console Armrest Assembly (GM Part#84329326)  and just swapped them out to get the wireless charger to work in your 2016-2017?

 

 

Center Console 84329326.png

  • 3 weeks later...
ChrisGarcia818 New Member

ChrisGarcia818

Posted
Posted
On 2/1/2018 at 8:38 PM, ThunderBunny01 said:

Big shoot out to pgamboa and his video.  I was going crazy as to why my iPhone X would not charge in my 2016. I just got my 2018 module and ordered the new conncector.  Took about 15 minutes to put everything together and pin the new connector, now everything works like a charm.  I did not rotate my mat, and i can charge as long as the phone is touching the back stop.

 

I do have a 2016 module for sale...if anyone wants a nice paperweight. LOL

This is great info, thank you! Any chance you have the link to his video and the part number to order? 

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
This is great info, thank you! Any chance you have the link to his video and the part number to order? 



I stock the module kit as well. PM me so we can go over the validation.


Sent from my iPhone using Tapatalk
ram1067 Enthusiast

ram1067

Posted
Posted

im have issues with charging iphone  Xr when plugged into car play port CC'17....anyone else with this issue?

  • 4 months later...
ent_pa New Member

ent_pa

Posted
Posted

@pgamboa I have the 2017 Chevy Tahoe.  Would the module switch with the 2018 GM part work to upgrade/make compatible my charging pad with my iPhone X?  If so can you send me info on your cord where I won’t have to change those pin things and also can you send me the info on where to order the new module.  I did hear in your video that it was on back order...hopefully not now though!  My email is ukpa09 at gmail.com -thanks a bunch!!!! And by the way- I’m in medicine and am not mechanically inclined- thank you for breaking this down in a way I could understand!!!!

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
[mention=159655]pgamboa[/mention] I have the 2017 Chevy Tahoe.  Would the module switch with the 2018 GM part work to upgrade/make compatible my charging pad with my iPhone X?  If so can you send me info on your cord where I won’t have to change those pin things and also can you send me the info on where to order the new module.  I did hear in your video that it was on back order...hopefully not now though!  My email is ukpa09 at gmail.com -thanks a bunch!!!! And by the way- I’m in medicine and am not mechanically inclined- thank you for breaking this down in a way I could understand!!!!

Send me this message to [email protected]

 

I have these ready made and ships in 1-2 days.

 

Thanks!

 

 

Sent from my iPhone using Tapatalk

pavementprincess20 Enthusiast

pavementprincess20

Posted
Posted

My Samsung Galaxy s8 wireless charges in a magpul case. I did have to take the rubber mat out of the charger, rotate it 180 degrees, cut the alignment nub off the rubber mat, and put it back in for it to work. Took about 5 minutes and is a great feature that I use every day. Keeps the console area clean and free of wires which I like. 

 

Note on the fitment of the phone into the pad, it fits completely perfect with no wiggle room side to side and some room to go forward and back. I keep mine in the all the way back position and that works for me. The case is a good one for the phone too as far as drops and grip etc.

 

Just my $0.02

  • Like 1
  • 3 weeks later...
grafik Enthusiast

grafik

Posted
Posted (edited)

Has anyone got the Pixel XL to wireless charge in the GM wireless charge pads? I have the '17 High Country but it doesn't seem to want to work. It is like a millimeter too wide to sit perfectly flat. I tried searching, but you get 100's of replies because "Sent from my Pixel"....

 

But curious if anyone is wireless charging with any Pixel XL or similar 3" wide phones and how they got it to work. Really not pumped about trying to shave down the large plastic trim around the rubber mat to make it a hair wider but that seems like the next step...

Edited by grafik
  • 10 months later...
DrNick Enthusiast

DrNick

Posted
Posted

Wanted to provide some information regarding recent phones as of summer 2020. 

 

I just did a PnP retrofit kit from @pgamboa's site and had a great experience with it and the install videos.  As of this post I have not been able to find the updated 2018 model 10 rib charging mat in stock anywhere (if they can even track down the actual 10 rib version at all with the weird part# stuff), but was happy to see my Samsung Galaxy S20 5G+ is able to consistently charge without issue on the 2017 9 rib version mat with the tall backstop already in the truck.

I didn't see any of the install videos reference it specifically, but if you were preoccupied with not breaking the console and didn't notice exactly how the original wiring is ran, there are channels for it inside the console ribbing itself and a cutout to hold the wiring in place along the hinge included on the driver's side hinge area of the underside plastic cover. 

pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Wanted to provide some information regarding recent phones as of summer 2020. 
 
I just did a PnP retrofit kit from [mention=159655]pgamboa[/mention]'s site and had a great experience with it and the install videos.  As of this post I have not been able to find the updated 2018 model 10 rib charging mat in stock anywhere (if they can even track down the actual 10 rib version at all with the weird part# stuff), but was happy to see my Samsung Galaxy S20 5G+ is able to consistently charge without issue on the 2017 9 rib version mat with the tall backstop already in the truck.

I didn't see any of the install videos reference it specifically, but if you were preoccupied with not breaking the console and didn't notice exactly how the original wiring is ran, there are channels for it inside the console ribbing itself and a cutout to hold the wiring in place along the hinge included on the driver's side hinge area of the underside plastic cover. 

Thanks for sharing!

Hope this helps.

84199943 - Matt (10-Rib)
23264395 - Matt (9-Rib)


Sent from my iPhone using Tapatalk
jrabenaldt Enthusiast

jrabenaldt

Posted
Posted

How well are your devices charging?  I installed the charging pad into my '16 Denali and it seems to trickle at best.  If not using the phone (iphone 8 plus) it will very slowly add charge to the battery but if its being used for maps the charge drops but not as quickly as if not connected.  If I run Waze, that's a joke; the charge doesn't even begin to keep up.  

 

Am I just expecting too much?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...