Jump to content

Android Auto Options for 2015

UofAZCats
 Share

Recommended Posts

UofAZCats Enthusiast

UofAZCats

Posted
Posted

I am very interested in Android Auto but I don't really care to purchase an after market stereo unit, I like the stock radio. That said could I trade out a 2017 stock radio in order to get Android Auto? Is there some other component that I would need to trade out also/instead of/in addition to?

sk Senior Enthusiast

sk

Posted
Posted

You can't just swap out the radio -- it needs to be programmed to your VIN. There are guys on this forum that can do it for you. The reputable ones are GTPrix or the guys at MVI.

UofAZCats Enthusiast

UofAZCats

Posted
  • Author
Posted

Thanks for the info. Didn't realize they were tied to the VIN but it makes sense for Onstar and the wifi.

 

If I were to try this does the radio need to get replaced or is there a separate module that can be changed out? I thought I saw something about that somewhere in looking into this.

Badmunky Enthusiast

Badmunky

Posted
Posted

Interested as well.
Dealer said it would be an update when I bought the truck. They lied. :(

sk Senior Enthusiast

sk

Posted
Posted (edited)

Interested as well.

Dealer said it would be an update when I bought the truck. They lied. :(

 

It depends. If you have a 2014 or 2015 it is NOT an option. If you have a 2016 or 2017 it is a FREE update that the dealer can do for you.

 

The OP asked about a 2015 so it can't be done by the dealer (takes aftermarket updates).

Edited by sk
martha3065 Enthusiast

martha3065

Posted
Posted

 

It depends. If you have a 2014 or 2015 it is NOT an option. If you have a 2016 or 2017 it is a FREE update that the dealer can do for you.

 

The OP asked about a 2015 so it can't be done by the dealer (takes aftermarket updates).

Except for those that got a mid year 2016 that had the 2015 head unit and the $200 credit, when units supporting AA were not available.
Badmunky Enthusiast

Badmunky

Posted
Posted

 

It depends. If you have a 2014 or 2015 it is NOT an option. If you have a 2016 or 2017 it is a FREE update that the dealer can do for you.

 

The OP asked about a 2015 so it can't be done by the dealer (takes aftermarket updates).

Mine is also a 2015.

Dealer told me it would be a simple software update when I bought my truck. They lied to me.

They lied about more than a few things but that one to me was a big one as it's something I really wanted.

 

The aftermarket has jumped all over this infotainment system! And that's great.

What's not great is they want more for the same upgrade than GM did when the truck was new!!!!!!!

Example: Nav was a $495 option. But could be had from most dealers for $300 if you haggled with them.

Most aftermarket options start at $650 and go to over $1,000!!!!!!!!!! That's down right stupid.

The aftermarket should beat the OEMs prices not double them!

T_ClarkEx39 Enthusiast

T_ClarkEx39

Posted
Posted

so is android auto supposed to be on the 2017 radios? im trying to figure out how to get it to work with my android phone. i have android auto downloaded to the phone, but dont see it anywhere on the radio itself. when i go to system update, it says i have the latest update available.

martha3065 Enthusiast

martha3065

Posted
Posted

so is android auto supposed to be on the 2017 radios? im trying to figure out how to get it to work with my android phone. i have android auto downloaded to the phone, but dont see it anywhere on the radio itself. when i go to system update, it says i have the latest update available.

Yes, if you have a Projection icon, just plug the phone in via USB. The icon will change to Android Auto.
T_ClarkEx39 Enthusiast

T_ClarkEx39

Posted
Posted

Yes, if you have a Projection icon, just plug the phone in via USB. The icon will change to Android Auto.

Thanks, yea, i figured that out about 45 minutes after posting that.

  • 2 months later...
jdrampage Enthusiast

jdrampage

Posted
Posted

So what would be the cheapest option to add phone mirroring? I don't care if it is android auto or just mirrors my phone. I just think its ridiculous to spend $600 on a dang module.

halhawkins Enthusiast

halhawkins

Posted
Posted
9 hours ago, jdrampage said:

So what would be the cheapest option to add phone mirroring? I don't care if it is android auto or just mirrors my phone. I just think its ridiculous to spend $600 on a dang module.

Curious to know as well.

  • 1 month later...
  • 7 months later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • davester
      Bench seat swap for 2021-2024 suburban

      By davester · Posted

      probably won't get a response from that user, as they haven't returned to the site since making that one post.  users don't (at least I don't, and I haven't seen any setting which would notify me via say, email) get any notification other than going to this site, and checking if they got a response on their thread...
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Thanks - I wasn't quite caffeinated this morning. 2:1 makes sense, turning the crankshaft 360 degrees will turn the cam 180 degrees, and had I done that, the cam's dot would be at 6 and the crank's at 12 again.   I went ahead and took the sprocket off anyway, aligned everything dot-to-dot including the balance shaft just for s&g. I'm glad I did because I discovered no Loctite on the timing sprocket bolts. Maybe it's not required, but at only 20 ft-lb torque spec, those bolts aren't in there very tight. Cleaned and reassembled with some thread locker and torqued.   A general observation: Less is more with RTV. If a little doesn't stop a leak, a LOT probably won't, either. RTV is thinly veiled revenge, in a tube...      
    • richard wysong
      Wow I'm in a pickle. (Broke down truck) and a story.

      By richard wysong · Posted

      The timing marks are ok, that is #1, you can turn it over until they line up and it won't change anything, the crankshaft turns twice for every camshaft revolution, I have always set up SB Chevs as your pic shows using a straight edge
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Someone's been here before.... There is a receipt for a 3-piece timing set, purchased earlier this year.   Is this picture something, or, nothing?   I have the timing cover off and my crank is perfectly TDC and the keyed gear's locating mark is dead on 12 o'clock.   The cam gear locating mark is also at 12 o'clock. Now, I'm not an expert, but all the install guides say the two locating marks should meet and be perfectly aligned when installing a timing set. The mark on the crank should be dead on 12:00 and the cam gear's mark should be dead on 6:00, and both marks should be perfectly vertically aligned.   I believe the timing gear is keyed or has a dowel that ensures it can only be installed on the cam in one position, so I have to believe the cam is out of phase somehow. At the very least, with a triangular bolt pattern, it can only be installed in one of 3 different positions.   Before I pulled the front cover, the truck was running alright, no service engine soon lights except an occasional P0172 / rich condition. Timing -16 timing at idle (should be +16), and total -35% fuel trim, two conditions I haven't been able to figure out.   In related news, my injector tested pretty well, wasn't leaking, but I had it rebuilt anyway, and it's on it's way back to me.         Along with this discovery, the good and bad:   Good: The oil pan seal appears undamaged.   Bad: -The timing cover has been reused, and the positioning dowels have been broken. That could explain some of the leaking. -Some kind of white paste or grease was used to try to seal the oil pan seal and timing cover (since wiped off..). -Then, someone globbed silicone all over the front of the cover and also buried the ckp sensor in it. But, they didn't put any inside the cover or use RTV to try to seal the oil pan seal with the timing cover (good).
    • Grumpy Bear
      PF63 Oil Filters Going Away?

      By Grumpy Bear · Posted

      The guy that owns K&P filters last I checked in with him has over 300,000 miles on his Dodge base Hemi using his own 35 micron absolute stainless mesh filter from its first oil change.    The GM study I've posted a dozen times shows the relationship in engine life based in multiples of base units, not miles or years. That is the base unit is the number of miles the motor ran using the reference filter efficiency.    The above two paragraphs dismantle anecdotal arguments IF one changes oil often enough to prevent particle formation and the motor is in otherwise good shape. That is not full of silica (no air filter) or suffering a metallurgical issue that is not part of the lubrication discussion. Poor heat treat in example.   Data from UOA's I've reviewed from more than a few engines can show remarkably broad variations in oil cleanliness using the exact same filter over the course of an engines life.     Lastly there is the common sense of it. Wear debris WILL circulate the engine BEFORE it ever sees a filter in route to that filter and WILL harm the pump which NEVER sees filtered oil.    Alpha question then becomes, given the facts, how long do you believe is a reasonable service life from a vehicle you are certain you will not pass down? That is the junk yard will be it's resting place when you're done with it? (the moral issue most don't care about).    Omega question is then how diligent are you prepared to be in general mechanical, air & oil maintenance? Preventing particulates and keeping them sufficiently dilute; preventing the precursors from generation, amalgamation and precipitation.    If I get a good look at the engine bay of a vehicle I have a fair idea of the owners commitment to the inside of the power train. That 30 micron WIX is still more efficient than a sieve.                 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...