Jump to content

Recommended Posts

  • 2 weeks later...
Posted

New to this forum, purchased a 2015 Sierra Denali 2500.  It does not have wireless charging, what all would I need to do to convert it over?

 

If there is another post about this please point me in that direction.

 

Thanks

Posted
57 minutes ago, Mike3871 said:

Just got this info

18-NA-153 or doc ID 5045823

I ordered the module, just have been waiting on the cable. Any idea if this would apply to the Canyon/Colorados as well and if so, does that mean the dealer will install for free? Or is this just them acknowledging the gen I module has issues and to tell us what we already know? :P

 

Bit of a bummer my '18 Denali Canyon has the Gen I module.

Posted

Phil, have you gotten the parts to make the pigtails yet?  Remember that you said around August that you might get these.  I have already paid you for it.  Please advise.  

 

Thanks 

 

Mike

  • Like 1
Posted

Mike 3871:  Thanks for the info.  I had paid PGamboa for the pigtail already.   I had gotten the 2018 model charger and was hoping to get the pigtail soon.  Does this kit come with a new pigtail?  If it does can you purchase the pigtail by itself?

Posted

Ordered 2018 module for $72.  It came with pigtail to retro my 2017 Sierra.

 

It looked different (black and LG Brand) but works like a charm now.

  • Like 1
Posted
Ordered 2018 module for $72.  It came with pigtail to retro my 2017 Sierra.
 
It looked different (black and LG Brand) but works like a charm now.


You didn’t buy two part number pieces? It all came with the one part number? The 84526978?

Thanks!


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • are there any codes? with lots of rust, perhaps disconnect/clean both sides of the connection/examine cable ends (the wires) for corrosion going into the sheath & replace if necessary/reconnect ALL the power AND ground cables between the battery, engine, frame, cab, fuse box and starter charm.li (website) has a no-start diagnostic procedure you can work through to get it working.
    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...