Jump to content

Recommended Posts

Posted

Have a 2015 Silverado with 39,000 miles on it, the AC is not working. Turn it on and it blows warm air, compressor is not running.

Any TSB about this or any thoughts?

Thanks in advanced.

 

 

Sent from my iPhone using Tapatalk

Posted
36 minutes ago, yukonjackxl said:

 

Have a 2015 Silverado with 39,000 miles on it, the AC is not working. Turn it on and it blows warm air, compressor is not running.

Any TSB about this or any thoughts?

Thanks in advanced.

 

 

Sent from my iPhone using Tapatalk

 

 

Your condenser and/or your compressor discharge line are cracked. Congrats. No TSB that I’m aware of. GM has left us for dead on this one. 

Posted
1 hour ago, yukonjackxl said:

 

Have a 2015 Silverado with 39,000 miles on it, the AC is not working. Turn it on and it blows warm air, compressor is not running.

Any TSB about this or any thoughts?

Thanks in advanced.

 

 

Sent from my iPhone using Tapatalk

 

Go and take a screwdriver or something and depress the needle in the fill to see if there is any Freon in it, I just had to replace the condenser in mine 

Posted
29 minutes ago, Tahoe02 said:

I thought they had extended the warranty to 60,000 miles on the 15,16, and 17 year models.

Only the Suvs, which makes no sense because they are they same part numbers for the pickups. 

Posted

Condensor or ac line. VERY common on early ones. Mine went during the Florida summer in 97 degree heatwave. They were overwhelmed with backorders and had no part. It did take a charge and wasa slow leak, so we maintained the freon till the part became available. You will be able to get the part now.

Posted

certain vin numbers have a special policy to extend the warranty to 5/60 vs the original 3/36

Posted

like the others said, probably the condenser. I replaced my condenser this past Saturday. 

Posted (edited)

I had to replace my condenser on my 2015 GMC sierra yesterday.

 

luckly I have extended warranty on my truck but I had to pay $100 deductible.  Which I think with only 40,000 miles should of been covered completely by GM.

 

I wasnt too happy about that and was hoping that my dealer would of just taken care of the $100 bucks but they didnt want to offer that.    $100 bucks for a dealer would be pennies to keep the customer happy.   So I might be going to another dealer on my next truck purchase. 

Edited by ncd1966
Posted
On 5/13/2018 at 10:11 AM, Tahoe02 said:

I thought they had extended the warranty to 60,000 miles on the 15,16, and 17 year models.

I was under the same impression. I was told that the 2015 Silverado would be the last truck with the 60k miles or 5 year warranty because they were changing it to 36k miles or 3 years for the 2016 and up model. I need to double check my paperwork but I swear that's what I was told when I bought my 2015 back in October.

Posted

I took my truck to the dealer one time and mentioned to them that my AC had stopped blowing cold air. The one guy I talked to said it was probably the compressor and that the part wasn't covered under warranty and I would have to pay out of pocket to have it fixed. Needless to say, I told the guy never mind and left it as is since the weather at the time wasn't too bad. Well now, we're starting to get into the scorching hot temps of summer here in TX and phuk that shit!! I need some AC!! So I called the dealer again today and was told by another service guy that my truck was still under the bumper to bumper warranty and the repair would be covered. Hearing this great news I proceeded to make an appointment for this Thursday, first thing in the morning to drop it off. 

 

So I'm guessing that depending on who you talk to at the dealership, and the mileage on your truck, they will in fact cover the cost and repair under warranty. Granted, I don't think I should have had to speak or call multiple times for the same issue but in the end, GM is fixing it and covering the cost so I'm good with that. 

 

Here's a pic of where my condenser leaked from. It was more noticeable yesterday before it rained over here. You can still see on the side where it kind of looks "wet". 

Condenser leak found at weld.png

Posted

I’m pretty sure this was a very common issue.

I had mine replaced and leaked in same place on my 2014. I think I was at 30k on my truck when that happen.

They admitted it was a huge issue and happening to many truck owners; yet no recall.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • How did all that extra get added? AI bot! 
    • This is interesting. My quote tagged here is different from my original quote. After I’m driving them longer. That isn’t me. I don’t talk that way. I definitely wouldn’t express myself that way. Interesting.
    • I have the same running boards on my truck and I do agree they are bulky. I also find myself stepping over them when getting in and out of the truck. Besides providing protection to the rocker panels, they aren't very useful.  I will be replacing them soon with the Amp Powersteps. 
    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...