Jump to content

Recommended Posts

Posted
16 minutes ago, JimCost2014 said:

You are very welcome, did you get the windows figured out?

10.4!!

  • Like 1
Posted
On 1/23/2019 at 1:53 PM, BB68 said:

This is the reason I dont buy used.

 

That article further enforces the reason why I dont use auto and why local GM dealerships stock transfercase clutches. Obviously the clutch isnt burnt out everytime you use it, but with the right spotty ice conditions they have worn out in under 120 miles. 

I'm no expert, but I doubt that very much

 

I don't think you can wear out the clutches in 120 miles unless you were purposely trying to destroy it or abuse it. I have heard of people leaving there trucks in Auto for the entire ownership of the vehicle (over 100 thousand miles) with no problems whatsoever. I definitely wouldn't recommend that either, but if you drive your truck properly it is completely fine to drive in Auto in mixed conditions. That's exactly what it is designed for.

 

Try to remember to turn back to 2wd when dry condition.

Posted
16 minutes ago, jjt said:

I'm am not an expert, but I doubt that very much

 

I don't think you can wear out the clutches in 120 miles unless you were purposely trying to destroy it or abuse it. I have heard of people leaving there trucks in Auto for the entire ownership of the vehicle (over 100 thousand miles) with no problems whatsoever. I definitely wouldn't recommend that either, but if you drive your truck properly it is completely fine to drive in Auto in mixed conditions. That's exactly what it is MARKETED for.

 

Try to remember to turn back to 2wd when dry condition.

fixed your quote.

 

I dont have any pics or VINs of the vehicle in question, but I do have friends and one of them replaced that clutch on a brand (at the time) pickup.

 

Even in the article posted it listed the clutch is only 5 - 20%(not going to reread and give exact) applied .... how can you even argue? Apply your brakes at 20% for 120 miles, tell me what happens.

Posted
4 minutes ago, BB68 said:

fixed your quote.

 

I dont have any pics or VINs of the vehicle in question, but I do have friends and one of them replaced that clutch on a brand (at the time) pickup.

 

Even in the article posted it listed the clutch is only 5 - 20%(not going to reread and give exact) applied .... how can you even argue? Apply your brakes at 20% for 120 miles, tell me what happens.

My Quote didn't need to be fixed. The transfer case was designed by an engineer not marketed. Driving in 4x4 in mixed conditions can be very stressful on certain components, especially in tight turning situations (parking lots).

 

This is my third GM/Chev truck with Auto, I live in Canada and drive in Auto quit often during the winter months. I have never had an issue. Everyone I know that has Auto does the same and none of them have had problems either.

 

How can you compare driving in Auto to driving with brakes at 20%?

 

Just because one guy you know had a problem doesn't mean it's a bad system and people shouldn't use it. 

Posted
11 minutes ago, jjt said:

My Quote didn't need to be fixed. The transfer case was designed by an engineer not marketed. Driving in 4x4 in mixed conditions can be very stressful on certain components, especially in tight turning situations (parking lots).

 

This is my third GM/Chev truck with Auto, I live in Canada and drive in Auto quit often during the winter months. I have never had an issue. Everyone I know that has Auto does the same and none of them have had problems either.

 

How can you compare driving in Auto to driving with brakes at 20%?

 

Just because one guy you know had a problem doesn't mean it's a bad system and people shouldn't use it. 

I have changed out 2 or 3 of them over the years, but they also had 80k + miles on them too. Our local dealers stock them.

One variable would change how long they last would be location. I see you are hiding behind a screen name with no location. We have much more time with in-climate weather vs someone in Texas.

 

Posted
4 minutes ago, BB68 said:

I have changed out 2 or 3 of them over the years, but they also had 80k + miles on them too. Our local dealers stock them.

One variable would change how long they last would be location. I see you are hiding behind a screen name with no location. We have much more time with in-climate weather vs someone in Texas.

 

I'm not hiding,  I'm in Calgary AB Canada.

 

I assume you work as a mechanic, or in the Auto industry if you have changed 2 or 3 of them. I'm not trying to argue with you and I appreciate your input. I'm not in the auto industry at all, so there's no doubt that you would be more knowledgeable and aware of problematic components. I know clutches are a wear item that will eventually fail, but under 120 miles would have to be severe abuse.

 

I think the Auto transfer case works great and should last a long time if used properly.

 

Just out curiosity, do you know what kind of cost to replace the clutches?

Posted (edited)
8 hours ago, jjt said:

My Quote didn't need to be fixed. The transfer case was designed by an engineer not marketed. Driving in 4x4 in mixed conditions can be very stressful on certain components, especially in tight turning situations (parking lots).

 

This is my third GM/Chev truck with Auto, I live in Canada and drive in Auto quit often during the winter months. I have never had an issue. Everyone I know that has Auto does the same and none of them have had problems either.

 

How can you compare driving in Auto to driving with brakes at 20%?

 

Just because one guy you know had a problem doesn't mean it's a bad system and people shouldn't use it. 

I believe it becomes factual when that guy knows a guy who knew a guy that it happened too. Just saying, can't argue logic like that.....

Edited by JimCost2014
  • Like 4
Posted
16 hours ago, JimCost2014 said:

I believe it becomes factual when that guy knows a guy who knew a guy that it happened too. Just saying, can't argue logic like that.....

The credibility is also strong when you reply to a post where the guy says he lives in canada by saying he's hiding his location and must live in Texas or something where he never needs 4WD...

Posted

Not specific to GM's however my mind is blown -  If you pay closer attention to the gas indicator light in your vehicle, you might notice that there is an arrow next to the pump. That arrow is indicating to you which side your fuel cap sits on. Other lights simply use the pump handle to indicate which side it is on.

 

 

Capture.JPG

Posted

LOL.  I just figured out the pump thing a few years ago.  I have two cars/trucks I regularly drive and the fill caps are on opposite sides.  For years I never remembered which side.  Now I look at that every time I fill up.  How'd I go a lifetime to only find that recently?!

Posted
40 minutes ago, Styles_888 said:

Not specific to GM's however my mind is blown -  If you pay closer attention to the gas indicator light in your vehicle, you might notice that there is an arrow next to the pump. That arrow is indicating to you which side your fuel cap sits on. Other lights simply use the pump handle to indicate which side it is on.

 

 

Capture.JPG

Very convenient when renting cars/trucks for sure...thankfully my 70 Chevelle doesn't need one :D 

Posted
6 minutes ago, parshal said:

LOL.  I just figured out the pump thing a few years ago.  I have two cars/trucks I regularly drive and the fill caps are on opposite sides.  For years I never remembered which side.  Now I look at that every time I fill up.  How'd I go a lifetime to only find that recently?!

LMAO I just discovered that in the last few years too and I thought I  was the last person on earth to know this...  so I am proud to pass title!

 

In my defence, I had my last truck for 17 years before this one though...

 

1998 GMC Sierra K1500 364,000 that I loved but was just rotting too much to work for me. Too bad...  if I’d known I was going to keep it that long I’d have had it sprayed every year. 

Posted

This is an old thread but one that applies...I had never heard of this feature called "Afterblow" but it's on our trucks but turned off by default, can only be turned on by the dealer...I think this will be especially good for high humidity areas:

 

 

Posted

Didn't search entire thread to see if it was mentioned yet - but on my '18 Denali - I just noticed that when you activate "trailer mode" on the shifter - the Battery Gauge in the cluster disappears and is replaced with a Transmission Temp Gauge.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   3 Members, 0 Anonymous, 2,142 Guests (See full list)


  • Latest Articles

  • Posts

    • So I'm in the middle of a DOD AFM delete on my 6.2 L86 Sierra. I had a pick holding the tensioner but after I got the Cam phaser gear off I was cleaning off all the rtv and apparently I didn't have the pick seated far enough in. I bumped it and the tensioner sprang forward.  I think everything is good but I want a second opinion. The top of the tensioner is just a looped piece of plastic that rides in that channel right? There is no spring or anything is there? I got the gear and chain back on and it seems tight and everything looks right. I'm hoping nothing fell out.
    • My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...