Jump to content

Recommended Posts

Posted
1 minute ago, Bluerado23 said:

88699ae12c371e6e58fab453cbf2c4d3.jpga904cb77e56a9b5c6c3875bdcc549fbf.jpg

Ran these for a few days and liked the look
22” wheels off premier Tahoe.


Sent from my iPhone using Tapatalk

Looks nice. A member here had the same 22" wheels on his Sierra and after a few thousand miles he removed them to check and the caliper cut a groove on the back of his front wheels.  Here's a pic of his truck.  I'll try to find the pic of the groove cut in his wheels.  Just FYI.

20190225_070530.jpg

  • Like 1
Posted
Looks nice. A member here had the same 22" wheels on his Sierra and after a few thousand miles he removed them to check and the caliper cut a groove on the back of his front wheels.  Here's a pic of his truck.  I'll try to find the pic of the groove cut in his wheels.  Just FYI.
20190225_070530.thumb.jpg.c9b13dcfac92887ad3ac8c4b7b6f3157.jpg

Thanks I appreciate it, yeah I had to use a 3/8 small spacer to fit the front cause they wouldn’t even rotate one bit.
But they’re gone now, only had them two days
New setup goes on tomorrow 055698433a668b32424b3ac41b522f4e.jpg


Sent from my iPhone using Tapatalk
Posted
1 hour ago, Bluerado23 said:


Thanks I appreciate it, yeah I had to use a 3/8 small spacer to fit the front cause they wouldn’t even rotate one bit.
But they’re gone now, only had them two days
New setup goes on tomorrow 055698433a668b32424b3ac41b522f4e.jpg


Sent from my iPhone using Tapatalk

A spacer clears the caliper but now the bad thing is your truck isn't hub centric anymore and is now lug centric.  Gm trucks don't like to be lug centric.  The max spacer thickness that can be used is 3mm (1/8") to remain hub centric.  There's only one place I know that makes a 3mm spacers for these trucks.

Posted
3 hours ago, Bluerado23 said:

88699ae12c371e6e58fab453cbf2c4d3.jpga904cb77e56a9b5c6c3875bdcc549fbf.jpg

Ran these for a few days and liked the look
22” wheels off premier Tahoe.


Sent from my iPhone using Tapatalk

It did look good. 

 

Same wheels, different tires that came on my Centennial Edition. 

Posted
8 hours ago, mafd2 said:

Looks nice. A member here had the same 22" wheels on his Sierra and after a few thousand miles he removed them to check and the caliper cut a groove on the back of his front wheels.  Here's a pic of his truck.  I'll try to find the pic of the groove cut in his wheels.  Just FYI.

20190225_070530.jpg

 

Posted

On the sierra's if you want to run previous  model 22'' wheels you need spacers,looks like the calipers on the Sierra has a small tab on the face of caliper that the Silverado does not have.

some people just grind that tab.

I will try to find the video that the guy was showing  and explaining that there is a difference in the calipers and showing the tab on the gmc caliper.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,774
    Total Members
    8,960
    Most Online
    lanaderay
    Newest Member
    lanaderay
    Joined
  • Who's Online   3 Members, 1 Anonymous, 1,577 Guests (See full list)


  • Latest Articles

  • Posts

    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...