Jump to content

Recommended Posts

Posted
This thread started Nov 14, 2018. It's been 18 months and windows are still leaking. 
 
We need a poll for what will come first:
 
1) Statement from GM on why the window frames crack and what the actual solution is
 
2) Vaccine for Covid19

[emoji23] Definitely the Vaccine


Sent from my iPhone using Tapatalk
  • Like 2
Posted
On 5/13/2020 at 10:18 AM, hotrodz37 said:


Wow that’s bad. I went through a similar situation, bad caulk job that I got to stop leaking myself. Mine came along with damaged interior panels, paint chips and the sunroof shade no longer working.

Rear window was replaced this past week due to cracks in the frame all damaged panels replaced and feel like I’m whole again. The new tech did a fantastic job and there are actually less rattles in the truck then before which I am thankful for.

Poured all day yesterday and new window is dry - for now.

Fayuo E4 is the replacement and I have heard of people having good luck with those. If it begins to leak, most likely going to fix it myself this go round.




Sent from my iPhone using Tapatalk

I'm tired of checking for water leakage every time it rains......after 14 mos. if it doesn't leak, it ain't gonna leak.

 

Fayuo E4 is for the glass and has nothing to do with the frame. Too bad not more pictures of the interior of the frame itself. And what's with this sealant? The number of casualties seem to be dropping off with time.......could it be that GM has already solved the problem but the solution too costly to retrolfit, let alone by half a$$ed attempts by inexperienced personnel at some dealerships? So all you get is the cheapest quick and dirty fix

 

I examined my frame and window carefully to compare what I could see in photos of failures. The top frame of my rear window is .065 cm or almost 3/10 of an inch thick at the spots where it typically cracks. Pretty thick to spontaneously crack....could be there is a rev on the frame and not the glass. In addition the whole frame is secured with black silicone rubber, not the snot they used to seal my leaking Silao Avalanche. Sealed to the body so tight there is no way in he!! that the dealer can remove that frame without breaking it apart and not practical to use the OEM silicone for field repair replacement installing a new frame because of prep time on surfaces, inconsistencies in bead placement and cure times........that's a job best suited for a GM robot on a freshly painted and cured surface and not some quickie job with a layer of crap they lay on top of leaking sealant that has already been compromised.

 

DSCN0948.JPG.51a11a92ad7678f784a4aaef7e05d786.JPGDSCN0950.JPG.b29127b1d48e45b963a3eb56c68d5ac5.JPGDSCN0953.JPG.1b705c81ab2140eb014466f53d6cfa86.JPG

 

 

Posted

Purchased a 19 Sierra at4, unfortunately I fell victim to this window leak. The truck is been at the dealership since May 8th, so its been about 10 days. Waiting on the bolts that hold the rear roof spoiler to the roof, my understanding is that the bolts have to be replaced after removing the spoiler. So that being said these bolts are on backorder with no ETA on arrival to the dealership. The truck does sit inside so I don't have to worry about more water getting in the truck, and they did give me a Camaro to drive in the mean time. But my question is has anyone had to wait for these bolts to come in and how long did it take to get some? 

Posted

Bamx31, iam with you there man, mine has to have the whole rear window replaced. Brand new 2020 LT TB, they have to basically disassemble the rear cabin, seats taken out, all trim removed, haven't even made the first payment. If they damage anything, they are replacing (plastic trim) or fixing it( paint damage). .

Posted

I'm not 100% sure, I'm assuming it has something to do with sealing the spoiler to the truck better than what the assembly line put on. 

Posted

@Nelly13 iam asking becuase i just fixed mine not too long ago, put a ton of blue gasket maker around the nut, hopefully it doesnt leak. The dealer gave me some nuts to put on there, he also said they are a one time thing. The ones he gave me didnt look like the ones that came off the truck(they were smaller and different design), so i just reused the originals, time will tell.

Posted

Yeah my service advisor told me they redesigned the nuts to pull the spoiler closer to help seal it better, as I've been told. Just hope they get the nuts soon. Driving a Camaro is fun but doesn't compare to these trucks. 

Posted

Nelly13 ill ask him to order me some also! Yeah these t1s are badass, i love my truck man, these little problems are annoying, but hell, nothings perfect or made to last forever. Lets enjoy it while we can. Hopefully you'll get yours back soon. 

Posted

I have a 2020 Silverado 1500 Z71 LT. It's certainly not a first-year problem because mine is leaking too. Same place everybody else is talking about, on the passenger, side upper right-hand corner of the rear window itself, not the slider. I live in California, the only way I noticed it was the hard water deposits dried up on the window after I washed it the second time. Not a major problem but has to be taken care of because it will get worse. I hate taking my Factory original built vehicle to those clowns at the dealer to half-ass a repair or r/r the window. It'll never be like the factory installation... But maybe that's a good thing!

Posted
2 hours ago, Nelly13 said:

Yeah my service advisor told me they redesigned the nuts to pull the spoiler closer to help seal it better, as I've been told. Just hope they get the nuts soon. Driving a Camaro is fun but doesn't compare to these trucks. 

Mind getting a part number for these redesigned nuts?  I hate walking into my dealership without something like a TSB or part number in hand and everyone claims to know nothing about it.  

Posted
21 hours ago, T1 slave said:

I have a 2020 Silverado 1500 Z71 LT. It's certainly not a first-year problem because mine is leaking too. Same place everybody else is talking about, on the passenger, side upper right-hand corner of the rear window itself, not the slider. I live in California, the only way I noticed it was the hard water deposits dried up on the window after I washed it the second time. Not a major problem but has to be taken care of because it will get worse. I hate taking my Factory original built vehicle to those clowns at the dealer to half-ass a repair or r/r the window. It'll never be like the factory installation... But maybe that's a good thing!

Then mine must be an odd one as that's the area I have been checking since I read this post, turns out mine is on the drivers side!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,949
    Total Members
    8,960
    Most Online
    Gkistler
    Newest Member
    Gkistler
    Joined
  • Who's Online   3 Members, 0 Anonymous, 881 Guests (See full list)


  • Latest Articles

  • Posts

    • Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...