Jump to content

Recommended Posts

Posted (edited)

I think its retarded to not have a handle to drop the gate.. My pops truck has been to the dealer twice for the tailgate now. All because the button isn't working...

Edited by 20Bowtie14
  • 2 months later...
Posted

I think everyone knows these are gravity drop and everything has to be perfect to drop.  I had a GM tri fold soft cover that locked it up tighter than a tick.  So I took the rear seal of the topper  out (it's directional) and reversed it.  Applied a small amount of silicone oil and as long as I'm level or up hill it releases every time. Any parking downhill and gravity does its thing. 

  • 4 weeks later...
Posted

I have the exact same issue. When I pull on the tailgate with even a little pressure (guessing about 5lbs with 1 hand) and press the release button with the other, I hear the clicking, but nothing happens. I noticed it when I had some doors for the house in the bed and I had to unload the bed one door at a time lifting over the sides because it wouldn't open.

 

I took it to the dealer today, they checked for recalls and service bulletins, found nothing. The dealer said they tried it on another truck on the lot and it did the same thing. Now I'm wondering if I should take it in again.

 

How "normal" is this issue? Members that aren't having a problem, have you tried pulling on the tailgate while you press the release button?

 

 

Posted

This is honestly the most ridiculous problem to have on a pickup! Sorry for the OP's problem, but there isnt even a key hole or handle to open it manually! My fathers had this same issue and he had to have the dealer reprogram something. He couldn't get his tools out of the bed to do a job we had because he has a hard tonneau cover!

Posted
8 hours ago, 20Bowtie14 said:

This is honestly the most ridiculous problem to have on a pickup! Sorry for the OP's problem, but there isnt even a key hole or handle to open it manually! My fathers had this same issue and he had to have the dealer reprogram something. He couldn't get his tools out of the bed to do a job we had because he has a hard tonneau cover!

 

Agreed! If there was a "manual tailgate" as an option I would have sought it out. Seems like a very gimmicky feature.

Do you know what your dad had done, and has it worked since they did whatever they did? I'm looking for a solution.

Posted

My 2019 trail boss tailgate does the same thing.  Most of the time the first button push just makes a click sound but doesn’t drop.  Then if I press it again the tailgate usually drops.  Mine has been that way since day one as well.  I’d much rather have a handle since this mechanism doesn’t seem to be all that reliable.  

  • 5 years later...
Posted

I am having this issue with my tailgate.  It won’t release more than one out of about 50 tries.  I have taken it apart and I see that the linkage system and electric actuator are a joke.  With the cover off the side of the tailgate, I can release it every time, quite easily, if I grab the linkages and release them manually.  Clearly there is an adjustment issue, or the switch actuator just doesn’t move far enough.  The linkage hooks into plastic bushings and and has about a half inch of free play.  If the play was not there, it would open fine…there seems to be a very obvious and bad design flaw in this electric release system.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
    • hello I recently bought a 2012 gmc 1500 with a 5.3 and have a AFM disabler on it I'm interested in doing a cam but I'm worried if I remove the AFM system I will fail smog does anyone have info if they are able to detect that or a work around to it (not talking about hot smogging) please let me know thank you  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...