Jump to content

Recommended Posts

Posted

Setting of Lo, blower all the way up, seems to take forever to cool off the truck. Even after airing it out. I’m only in Wisconsin too, what about people in truly warm states?

 

My Tacoma would get so cold you could see your breath.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted
20 minutes ago, Controller23 said:

 

Setting of Lo, blower all the way up, seems to take forever to cool off the truck. Even after airing it out. I’m only in Wisconsin too, what about people in truly warm states?

 

My Tacoma would get so cold you could see your breath.

 

 

Sent from my iPhone using Tapatalk

 

You have to share the A/C with the people in the back seat now. :D

  • Like 1
  • Thanks 1
  • Haha 3
Posted (edited)

^ He isn't wrong. Since trucks don't have a separate rear system like the SUV's it takes away some of the power and efficiency from the front vents to power the inefficient rear vents. That is why all the complaints on not having rear vents and people being "hot" back there was comical with the K2's. The air coming out the back is warmer and moving much slower than what is shot out of the front vents. I have no doubt unless they made some significant changes to the system that the K2's are better at cooling the cab and rear passengers than the T1's. Every truck I have been in the rear vents were trickling out air that made my knee feel good, that was it. Being in Texas my truck cools off well and the rear passengers are fine, tons of cold air is coming out of the four front vents.

 

Is there a way to close the rear vents?


Tyler

Edited by amxguy1970
Posted

No problems with mine. We get mid to upper 90s with a lot of humidity 80-90% all summer. You have to remember you came from a small truck to a full size and it takes some time to get the heat out of the seats and interior.

Posted

I'd have it checked if I were you. I'm in hot humid La. and my A/C is cold. I have an A/C thermometer clipped in the vent and it gets to 38°.

Posted

I might go have it checked. It certainly shouldn’t take 20 minutes to get down to 70 when it’s 85 out.


Sent from my iPhone using Tapatalk

Posted

I've noticed that when the AC temp is at "low", it's really only cool and not ice cold like my previous GMC trucks.  I have to have it on "re-circulating" for the air coming out to be nice and cold. 

Posted

I'm in NC where it gets hot and humid. I have no complaints about the A/C in my 19. I also remote start my truck 99% of the time, so it's already nice and cool by the time I hop in. 

Posted (edited)

Is there still the option to adjust max blower speed as there was in the k2 trucks?

 

Edited by DeePa
Posted

My 2015 Yukon cooled much faster than my Trail Boss. I never had to turn the fan speed up past half way even on the hottest days here in Florida. I regularly turn the fan speed to the fastest setting in my Trail Boss.

 

The Yukon has a separate evaporator and controls for the rear seats and the Silverado does not.

Posted
3 hours ago, amxguy1970 said:

I have no doubt unless they made some significant changes to the system that the K2's are better at cooling the cab and rear passengers than the T1's

Not so.  The amount of air that comes out of both my front vents and the ones in the rear is very adequate and cold. Much improved over my 15

Posted
4 hours ago, Controller23 said:

 

Setting of Lo, blower all the way up, seems to take forever to cool off the truck. Even after airing it out. I’m only in Wisconsin too, what about people in truly warm states?

 

My Tacoma would get so cold you could see your breath.

 

 

Sent from my iPhone using Tapatalk

 

Mine is currently in the shop with an Evaporator leak that has rendered the system ineffective. And yes, the evaporator requires the dash to be removed! I have 2,300 miles and I'm already pissed off that I went with the Silverado. 

  • Sad 1
Posted

It's 92 here in Ohio today and I'm ice cold.  Must be a leak in your system, op.

Posted
29 minutes ago, BlackLS said:

My 2015 Yukon cooled much faster than my Trail Boss. I never had to turn the fan speed up past half way even on the hottest days here in Florida. I regularly turn the fan speed to the fastest setting in my Trail Boss.

 

The Yukon has a separate evaporator and controls for the rear seats and the Silverado does not.

The high fan speed helps move air around better but the air is not as cold with the blower on high as the air is rushing through the evaporator too fast. The lower the fan speed the colder the air will be out of the vents. Don't turn the recirculate on if your truck has been sitting in the hot sun all day because on recirculate it's sucking the 120° interior temp through the system taking it that much longer to cool down. With recirculate off the system is sucking the outside air instead of the hot cabin air. Once the interior cools down, then turn the recirculate on. It'll stay cold and run more efficient because the cabin air is cool and is recirculating.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,979
    Total Members
    8,960
    Most Online
    rayredbone
    Newest Member
    rayredbone
    Joined
  • Who's Online   2 Members, 0 Anonymous, 509 Guests (See full list)


  • Latest Articles

  • Posts

    • Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...