Jump to content

Recommended Posts

Posted
On 9/21/2019 at 6:33 PM, Ezekiel2517 said:

Looks great. Just curious.  When folks are going with 305s and aftermarket wheels, why not do a 20x10 wheel?  Wouldnt you need less backspacing then?  If seen several 305s on aftermarkets and they are all 9" wheels.

Because the 20x10 won’t fit without rubbing Or alot of trimming.  Unless you go with more lift.  Even with the 20x9 mine still rubbed.  Had to remove bracket behind mud flap for clearance.

Posted
On 9/20/2019 at 8:10 PM, jordanl010 said:

Great looking truck. Do you have a link to this kit by chance?

 

What height are you running your coilovers? If max, do you have a diff drop? Sorry for the question parade... lol super interested in this setup.

No problem on the questions. 

 

They don't show a specific c/o kit for the 19, but they have King build and tune them to match for you once ordered. 

 

Here is a link to the uppers. https://www.bajakits.com/i-31570226-19-silverado-sierra-1500-4wd-upper-arm.html?ref=category:1459192

 

I am running the full 3". I have been letting them settle before I adjust again. I am coming down about a 1/2" in the front. Although CV angles are pretty good and the truck drives great. 

 

JT at Baja Kits is awesome. Great customer service and they get back to you with any questions very quickly. 

Posted

New to the board and I just replaced my wheels from the stock 20" LTZ rims to the 22" Chevy rims... I do plan on keeping both sets of tires as I heard the Bridgestone Alenza tires are terrible during the winter time.

 

3BDB3E70-5406-45A9-B601-A351668B3066.JPG

  • Like 3
Posted (edited)

Kept the 22" OEM wheels on my High Country and went with the Fabtech 4" lift with 285/55R22 Nitto Ridge Grapplers. Used 1-1/4 Spacers and still had to trim a bit, but not too much at all.. 

fullsizeoutput_10f7.jpeg

Edited by Gamecock12
  • Like 7
Posted
Kept the 22" OEM wheels on my High Country and went with the Fabtech 4" lift with 285/55R22 Nitto Ridge Grapplers. Used 1-1/4 Spacers and still had to trim a bit, but not too much at all.. 
fullsizeoutput_10f7.thumb.jpeg.3e99819f95119f3d672f3ffb18167805.jpeg
Nice!!!

Sent from my SM-N960U using Tapatalk

Posted
7 hours ago, foxcoupefan said:

No problem on the questions. 

 

They don't show a specific c/o kit for the 19, but they have King build and tune them to match for you once ordered. 

 

Here is a link to the uppers. https://www.bajakits.com/i-31570226-19-silverado-sierra-1500-4wd-upper-arm.html?ref=category:1459192

 

I am running the full 3". I have been letting them settle before I adjust again. I am coming down about a 1/2" in the front. Although CV angles are pretty good and the truck drives great. 

 

JT at Baja Kits is awesome. Great customer service and they get back to you with any questions very quickly. 

How about your differential?  Did u have to drop it or chop crossmember at 3"?

Posted
1 hour ago, Ezekiel2517 said:

How about your differential?  Did u have to drop it or chop crossmember at 3"?

No and none of the companies doing similar set ups seem to require it. The CVs are definitely angled but from other trucks I have seen it seem minimal. 

  • Like 1
Posted
4 hours ago, Gamecock12 said:

Kept the 22" OEM wheels on my High Country and went with the Fabtech 4" lift with 285/55R22 Nitto Ridge Grapplers. Used 1-1/4 Spacers and still had to trim a bit, but not too much at all.. 

fullsizeoutput_10f7.jpeg

Looks great but you had to cut with OEM 22” wheels and 285/55R22’s? I’ve got the 3” kit and same tire and wheel set up and I have very little rub, only under certain situations it rubs, not enough to even trim. Something sounds odd. 

  • Like 1
Posted
20 hours ago, foxcoupefan said:

No problem on the questions. 

 

They don't show a specific c/o kit for the 19, but they have King build and tune them to match for you once ordered. 

 

Here is a link to the uppers. https://www.bajakits.com/i-31570226-19-silverado-sierra-1500-4wd-upper-arm.html?ref=category:1459192

 

I am running the full 3". I have been letting them settle before I adjust again. I am coming down about a 1/2" in the front. Although CV angles are pretty good and the truck drives great. 

 

JT at Baja Kits is awesome. Great customer service and they get back to you with any questions very quickly. 

Thank you so much!

  • Like 1
Posted

Had center cap stickers made

3D stickers.com

Should be here today

3910dc27320d9aa56a4ea44c58ad46f4.jpg

 

 

Sent from my iPhone using Tapatalk

 

  • Like 3
Posted
1 hour ago, Opiedeegs said:

Dipped my stock wheels waiting on black Center caps
8fe83acd497a960072d0e8566031f637.jpg


Sent from my iPhone using Tapatalk

How many coats did you do? Did you tape off the tire or just spray away and peel off the over spray? 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • That sir is a choice. And even if it were not for all the reasons stated, this disruption has zero to do with the reality of the actual logistics and everything to do with the greed of SPECULATION. Spot price is irrelevant to reality. 
    • What I think you're saying is there is supply here at home, and in Venezuela, and we could ease pricing if only it were favorable to do so.   Well, yes?   But that's not the current market. Supply isn't what could someday exist, if only, it's what producers are willing to produce and sell at a certain price point.   The national price of single family homes would come way down if we'd just slap together a few million homes this summer.   RAM and GPUs would get a lot cheaper if we just set up some factories to produce a bunch more and stopped using it to build out AI data centers.    
    • The turn signal/multifunction switch is faulty.  I've seen a few of these go bad at work.  
    • I am experiecing the same issue, I have gone in the setting and disabled rain sensing function but I am still experiencing this. Whe i use my turn signal they will redomly turn on. Sometime they stay on and others times we swipe 2 or 3 times and stop. Its super anoying, escpecially after a fresh wash. Anyone have any advice? . rain-sensing function, but I am still experiencing this issue Sometimes they stay on, and other times we swipe 2 or 3 times and stop.It's super annoying, especially after a fresh wash.When I use my turn signal, they will randomly turn on. I am experiencing the same issue. I have gone into the settings and disabled the rain sensing function, but I am still experiencing this.
    • If we actually used any significant amount of that source in the USA then I'd agree but we don't. We've had that discussion before. We drill and pump more than we use. Thing is, we sell. We export. Gas and Crude. It's more profitable so any shortage here is self inflicted and LEGAL.    I worked a gas plant that has multiple fuel sources available and I worked in the furnace and boiler plant in that facility. I'd had days we swapped fuel types four times in a twelve hour shift which isn't done on supply but on margin. Two of the fuel sources are internally generated. Tail gas and DAK, both of which are sold as well a consumed. We always had more than we needed to run the process but we chose the fuel that produced the best margin not bought at the cheapest price always. A good bit of math to that and back in the time that was done on a slide rule.     I worked the Shale Oil Semiworks of Chevron Research and CONOCO Research in Salt Lake City. That process never went into production although it was very successful. Why? Did we lack oil bearing shale? Nope. Price of crude never made the margins work. That was in the late 70's early 80's. Remember history? What was happening then was a reaction to that situation. It didn't drive it. If so then it's easy. This isn't a supply and demand thing. This is a profit and margin thing and AI rules that now.    In no refining situation that I was ever in would a bomb hitting a well anywhere in the world 'instantly' interrupt or even distress the supply. Most plants have more than a months worth of crude in the tank field and more in pumping stations. That yo-yo could play out over days, weeks and maybe months and have zero impact on plant operations. How many times has this been off and on in the last few months? These people and not stupid. These plants measure down time in hundreds of thousands of dollars per day. They are not sucking fumes or waiting on the next truckload with baited breath. Besides, as I noted, they are for the most part 'vertically integrated'. They own it from the dirt is sits in to the delivery rack and sometimes to the pump. It has a HUGE shock absorber built in. When production suffers, refining wins and when refining is winning exploration is killing. The rest of that crap in the news is a 'news cycle'. Government dipping in to reserves? Oil is stealing their milk money. There's a reason Chevron abandon Venezuela infrastructure and it had nothing to do with security of US citizens. Nationals run those plants. it has to do with MARGINS disappearing to corruption. They are in no hurry to return. Is there supply there? Oh yea. More than enough to offset what is bought in the middle east. Just isn't ???? Profitable.    We have supply. There are places in Illinois you can drive a pipe into the ground and run your homes natural gas furnace on it.    A refinery fire will gum up the supply works but not a localized war where the market is using a limited supply from. Now Europe, that's something other....
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...