Jump to content

Recommended Posts

Posted
11 hours ago, FiatDale said:

To the comment above, most dealers will say it’s not possible to add after the fact, so I’d save your breath. Either attempt it on your own with more research and then report back to them, or don’t try. Most dealers will not want to mess with trying to reprogram as they don’t know how.

You are correct sir!  2 different dealers both said no option to add.....  1 recommended checking back later since the 2019s are still pretty new...  

Posted

Mirror came in, waiting on the camera, should be here Monday. Powers up perfect with the plug that’s glued inside the headliner. I’ll post a full install with PN needed next week.

e8d65c09f38d971209ddf2fa160d303f.jpg

  • Like 3
  • Thanks 1
Posted
1 hour ago, FiatDale said:

Mirror came in, waiting on the camera, should be here Monday. Powers up perfect with the plug that’s glued inside the headliner. I’ll post a full install with PN needed next week.

e8d65c09f38d971209ddf2fa160d303f.jpg

Oh snap!! Definitely saving my money and not spending any of it until I see if this works. Looks like you’ll need the wire cover for it as well.

Posted

Thanks for checking this out, I'm excited to see what happens with this!   So the rear camera is $267, how much is the mirror?  I don't recall seeing that (might have missed it). 

 

Thanks again!

 

Smitty

Posted
32 minutes ago, FiatDale said:

Mirror PN: 13532977

It’s not cheap.. around $550

Awesome, you’re the man!! Thank you for sharing! That will be my next upgrade for sure! Excited to see your final pictures!

 

Posted
37 minutes ago, FiatDale said:

Nope, this is completely separate from BCM. (Also I work at a dealer).

That’s great news, now I have to do this one!

Posted

Wonder if this could be retrofitted into the K2s since no Programming is required. [emoji848]

Posted

I have checked on adding cameras as well and dealer told me not possible. there is a completly different bcm used with these setups.. if you have the max trailering package it is not possible..   bcm is body control module  

Posted

I think it could. I have not looked at the factory add on camera for the K2 to check out the wiring, but it’s just a coax going from the mirror to the camera. The other wiring to the mirror I could provide a pinout - there’s nothing special there.

To the person above - dealerships don’t like doing retrofits. If they put their hands on it, they have to warranty it and be liable. I’ve been doing retro’s since the GMT800’s and also providing them to people. Most of their technicians do not take the time to see what matches what, they only look at their current situation at that time. So they never figure out what’s REALLY possible in between products and brands.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,897
    Total Members
    8,960
    Most Online
    ncleg
    Newest Member
    ncleg
    Joined
  • Who's Online   6 Members, 1 Anonymous, 831 Guests (See full list)


  • Latest Articles

  • Posts

    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
    • Yes your absolutely right, I been looking at the 4 inch BDS one and it acutely states you can use the stock 20’s just not the 17’s or 18’s, I also didn’t realize that with my 275/60r20 stock wheels I’m already running 33 inch diameter wheel setup lol so I can just run my stock wheels and tires atleast to start.
    • I would expect that to be lift-kit dependent.  If the kit has interference issues w stock wheels, then the kit/manufacturer should indicate that somewhere.
    • That’s what I’m wondering is if the stock backspacing of the factory wheels will clear new upper control arms and such  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...