Jump to content

Keyless Entry Keypad

Coolade
 Share

Recommended Posts

Coolade Enthusiast

Coolade

Posted
Posted

Has anyone purchased and installed this keypad?  Wondering if it works if the key fob is left in vehicle to keep the truck running instead of turning off after the predetermined set time.

 

spacer.png

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Ryno12
Ryno12

I finally got this programmed & installed. Not thrilled with the shape of it. It doesn’t look like the one pictured on GM’s website & it doesn’t quite look right on the truck, IMO. It does w

Basketcase
Basketcase

Curious about this. I leave my truck running often in the hot summer or cold winter as I bring my dog with me everywhere and he stays in my truck when I do site visits. I hate how the truck turns it

AT4 HD Ron
AT4 HD Ron

Agree, I checked tonight and you can lock the fob inside. The GM pic shows the front well, so I snapped a pic of the back for you.     

Posted Images

Basketcase Enthusiast

Basketcase

Posted
Posted

Curious about this.

I leave my truck running often in the hot summer or cold winter as I bring my dog with me everywhere and he stays in my truck when I do site visits. I hate how the truck turns itself off.


Sent from my iPhone using Tapatalk

  • Like 1
bharris515 Enthusiast

bharris515

Posted
Posted (edited)

Interested myself. I can't find any info on this online other than a GM-authority article. Does anyone know if this is wireless and just sticks on or how its installed?

Edited by bharris515
SkidooSteve12 Enthusiast

SkidooSteve12

Posted
Posted
29 minutes ago, bharris515 said:

Interested myself. I can't find any info on this online other than a GM-authority article. Does anyone know if this is wireless and just sticks on or how its installed?

 

I was keeping an eye on this device as well. This is copied from shopchevyparts.com

 

Designed for mounting above the door handle on the driver side, this keyless keypad can be placed on any blemish-free glass or painted surface on the vehicle. Forget the magnetic "hide-a-key" and use this Remote Keyless Keypad to unlock the doors securely.  Think digital "hide-a-key".
 

AT4 HD Ron Enthusiast

AT4 HD Ron

Posted
Posted

I have this.  I know you can lock the fob inside the truck with it, which is what I wanted. 

 

Not sure about keeping the truck running and wasn't even aware that the truck would shut itself off after some time.  I never let mine just idle for any amount of time.

 

It is a neat little device.  Dealer had to program it to the truck, then yes it just double-stick tapes wherever you want it on the truck.  It does seem a bit cheap and fragile so I do wonder about how long it will last, but so far so good.

BB&Chiveon Enthusiast

BB&Chiveon

Posted
Posted

first person i have heard with this on . got a pic? i like my ford work car with that on it - never take keys out

SkidooSteve12 Enthusiast

SkidooSteve12

Posted
Posted

Hmm now I wonder if it would survive the automatic car wash over time...

 

Wonder if you could stick it to the inside of the gas filler door? Then you run the risk of the gas fumes messing it up or the double stick tape. ?

AT4 HD Ron Enthusiast

AT4 HD Ron

Posted
Posted

I can snap a pic, but like Steve mentions, I have yet to mount it due to concerns about how it will hold up to the Ohio Winter.  I did consider inside the gas door, and that may / may not work as it looked to be a really tight fit.  My thought was to mount it in the area where the mirrors are mounted on the older trucks - keeps it hidden as I think it sticks out too much if you mount it on the B pillar.  I had a $100 accessories credit, so it only cost me $100 including dealer programming.  In hindsight, just not sure it was worth it as it looks to be disposable after 18 months - maybe I am wrong, but it just does not exude quality or resilience in my opinion!

SkidooSteve12 Enthusiast

SkidooSteve12

Posted
Posted

Thanks for the input. I think on the door where the previous mirrors mounted would be the safest place. I'd be curious if you can install it and then run a bead of clear silicone sealant around the outside end of it to seal it to the door panel?

BlancoSilverado Enthusiast

BlancoSilverado

Posted
Posted
22 hours ago, AT4 HD Ron said:

I have this.  I know you can lock the fob inside the truck with it, which is what I wanted. 

 

Not sure about keeping the truck running and wasn't even aware that the truck would shut itself off after some time.  I never let mine just idle for any amount of time.

 

It is a neat little device.  Dealer had to program it to the truck, then yes it just double-stick tapes wherever you want it on the truck.  It does seem a bit cheap and fragile so I do wonder about how long it will last, but so far so good.

Can you actually lock the key inside? im scared that it might think the key is "near the door" and will unlock if someone tries the button. 

Where do you put the key? 

Ryno12 Enthusiast

Ryno12

Posted
Posted
Can you actually lock the key inside? im scared that it might think the key is "near the door" and will unlock if someone tries the button. 
Where do you put the key? 

Yes, you can lock the fob inside.
AT4 HD Ron Enthusiast

AT4 HD Ron

Posted
Posted

Agree, I checked tonight and you can lock the fob inside. The GM pic shows the front well, so I snapped a pic of the back for you. 
 

 

E94F531E-4B6F-4352-99C9-4EF6C80A7FF7.jpeg

  • Like 1
Ryno12 Enthusiast

Ryno12

Posted
Posted

I just ordered one of these. I’ve always thought that was a good idea when I’d see my friends with Fords use them.

 

Are they backlit?

bharris515 Enthusiast

bharris515

Posted
Posted
8 hours ago, Ryno12 said:

I just ordered one of these. I’ve always thought that was a good idea when I’d see my friends with Fords use them.

 

Are they backlit?

was wondering same thing. Is it backlit? Also are they physical buttons you press or like a touch screen?

AT4 HD Ron Enthusiast

AT4 HD Ron

Posted
Posted

Yes, it is minimally backlit once you press a button.  There are five actual buttons - one in the section marked 1/2, one in the 3/4 section, etc.

 

You can lock the truck without putting your code in.  Inputting the code unlocks the driver door, you can press an additional button for it to unlock the other doors.  If you hold the buttons, it will fold/unfold the mirrors just like the fob does.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • JimCost2014
      Towing In Loose Gravel

      By JimCost2014 · Posted

      If what you are doing works, keep doing it:   4LO (Four-Wheel Drive Low) should only be used in extreme low-speed, high-torque situations such as deep mud, heavy snow, steep rock crawling, or extreme inclines/declines, and you must follow the correct engagement procedure to avoid drivetrain damage. Intended Use Cases Deep mud or snow where traction is extremely poor and you need maximum torque to get unstuck Trucks Only+1. Rock crawling on steep, uneven terrain forum.fullsizechevy.com+1. Extreme inclines or declines where you need to control speed and maintain traction solutionsphere.blog. Heavy towing in low-traction conditions (e.g., deep sand, ice) carclubsusa.com.
    • rdonarski
      Towing In Loose Gravel

      By rdonarski · Posted

      Hi,   I work a steep boat landing that has patchy blacktop going down the hill and soft sand/gravel at the bottom. Due to low water levels, it's not always possible reach the blacktop. I've had to help several people get out this year already and with fall coming, I'm anticipating more. I always use 4L. There was a gentleman there today with a 2500 HD (actually 2 - him and his son both have them) and they were trying to get his son's wake boat out. This gentleman swears that you should use 4H in the soft gravel. Says he was a farmer and you always use higher gear when stuck. I was wonder what your thoughts on this are? If I'm wrong, it would be good to find out before things get busy.
    • Bill Lemmond
      Roll up bed cover experiences

      By Bill Lemmond · Posted

      Looking for feedback from users of roll up aluminum slat bed covers who have had it for more than 3 years. I prefer the aluminum slat style over supported vinyl covers due to security and the capacity to support a light load. The slight loss of bed opening when rolled up is not an issue. Presently have BAK Revolver the "industrial grade vinyl overlay" on mine is shrinking & coming loose at the rear and on both sides in addition to cracking at some of the folding joints. Truck lives outdoors in NC latitude. Can't justify the steep price to replace it with another one if that's the expected lifespan. Do you have a better alternative?
    • Bill Lemmond
      BAK Revolver bed cover

      By Bill Lemmond · Posted

      Thanks, your last sentence is the root of my problem, outdoors truck and southern latitude = UV overload. Looking at replacing with Rough Country powder coated aluminum slat roll up model. 
    • JakeD
      Tire fitment

      By JakeD · Posted

      I’m looking at putting a lift in my 2024 gmc sierra 1500 elevation trim, has anyone had any luck with fitting a bigger tire under the rear for a spare?? Was gonna go with a 4 inch zone lift Also what wheel and tire size setup are you all running? Wondering if I can get away with keeping around the stock size a 33 inch, and just get some new wheels to have enough back spacing then I can just keep my original spare tire I have under the truck now.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...