Jump to content

Recommended Posts

Posted

Let's use the favored lower numbers. This virus has an R0 of @ 2.5 at an interval of 7. 

The population of the USA is roughly 327 million. 

The entire population would be infected in roughly 145 days.

At a 1% MR 3,272,000 US Deaths. IS that acceptable? Is half that acceptable? That's your best case with 'let her rip'. 

 

Chicago Mayor is getting serious about containment. Police Super say WARING PERIOD IS OVER. Now we act. Ticket Arrest. What ever it takes for people to take it seriously. 

Mayor says if she has to shut down every park and street she will if people will not follow the LAW. 

City counsel has bought up over 2,700 hotel rooms to house homeless. 

State medical is say unless Shelter in Place compliance improves greatly that we will run out of med resourced in just a few more weeks. Beds mostly. Staff secondly. Swabs and Culture media. She also noted that Illinois by far already has the best compliance levels of the 50 states but more is needed. She reinforced there is NO CURE and there is NO VACINE. 

 

Med said phones have been used to anonymously track people movement for the entire USA.  

 

I don't mind, for one, watching from the sidelines. 

 

 

  • Like 1
Posted
1 hour ago, Likarok said:

I have seen a lot of commentary on Canadian tv pointing out that when stuff like this happens it shows that we need manufacturing back in North America and not in all these shit hole countries. If our economies were stronger we would be able to weather a storm like Corona better. Thanks to the lefties like the Clintons and our ahole Liberal party in Canada, we are on the damn near on the soup line now. 

 

 

Most of our pharmaceuticals are made in China. Maybe this will finally wake some people up. 

  • Like 1
Posted

L86 All Terrain: 

 

A call for Universal Morality. A state where it is not them or us but we as a race. Setting aside everything but the goal of life. 

 

Her final question. The answer is.....NO.  This tread alone makes that point. Division. It's what humans do. 

  • Like 2
Posted
1 hour ago, jlong1984 said:

Most of our pharmaceuticals are made in China. Maybe this will finally wake some people up. 

Plus about 90% of the junk at Walmart! That use to be made in North America. 

Posted

I heard an experience of a fellow the other day from his middle school years. Social Studies Exam asked the students to draw a line from the name of a Government to a set of definitions. Among them was Theocracy. The dictionary definition is: 

 

:a system of government in which priests rule in the name of God or a god.

 

The teacher copied it word for word. This fellow raised his hand and said the definition was incorrect thus there was no choice. Asked why he thought that he pointed to the Greek root of Theocracy. Theo thus rule by God, not priest. As there is but one God there wasn't a choice that reflected the true meaning of the word being offered. Teacher instructed the class to skip that question. She must have know her Greek. :) 

 

This is a health issue and it's been turned into poly-ticks, commercial interest  nationalism and ethnic origin division. No one here is going to fix anything but what they control under their own roof...me thinks. 

 

:seeya:

 

 

 

  • Like 1
Posted (edited)

In our company, we're taking precautions almost all the way. Hand sanitizers everywhere in the office and shop, half masks, glasses, gloves, disinfectant wipes and so on, to the disposal of the employees. And yes, of course it is meant to keep the guys around and not simply take the easy way out. 

Even if it is sometimes tricky, we're keeping the crews together and not rotating people as we need them.

Sure, it's very inefficient. But at the end it'll allow us to keep working and keep the economy going. At the same time, we're taking the pressure off the government aid and do our part that this money is going to the people who really need it.

Furthermore, our company is paying an extra 100 bucks weekly to compensate for the increased prices in the stores and for extra costs caused by the pandemic.

And those are just examples. We're trying to keep going. We have to. To get through this, we have to do our part.

 

And then you have this lady coming out of her house, approaching one of our slab saw operators to tell him that his work is not essential.

She's under self quarantine whit her two kids and want him to stop working.

So, she comes out to talk to the operator (she put herself under quarantine, remember?), who was cutting the road about 50-60 feet away from her house and asked him to stop.

He did the right thing and called the site supervisor who made his way down there to talk to the concerned citizen.

Before he got there, she already called the city main office and they eventually cancelled the job.

Duh!

 

so long

j-ten-ner

Edited by j-ten-ner
  • Like 1
Posted (edited)

+++ALERT+++ALERT+++ALERT+++

+++canada+++

+++food supply is ceasing+++

+++people are forced to eat toothpaste to survive+++

 
 
so long
j-ten-ner
 

alert.JPG

Edited by j-ten-ner
  • Like 1
Posted

15 days ago there were 200 confirmed cases in the USA. Today as of now...68,572. Yea, we got a handle on it. :rolleyes:

 

Chicago Mayor has the boys in blue in force on Lake Shore ramping up compliance. Next move. Close the lake front and city parks. People are bringing it on themselves. 

 

Earlier I crunched some numbers for the USA and made an assumption that the USA was like China with a single point of origin. Ground zero if you will but the truth is there were multiple first persons in several parts of the country. That multiples the geometric progression by the number of first case incidence. 

 

I get people making the choice to "Live Free or Die". To put THIER economy head of safety. For themselves. Question is, do you have the right to make that choice for everyone else. 

  • Like 3
Posted
1 hour ago, Grumpy Bear said:

To put THIER economy head of safety. For themselves. Question is, do you have the right to make that choice for everyone else. 

My personal opinion is, that our (Canadian) government should shut down everything for at least 21 days!!!

I can survive financially, no problem. But I am not the majority.

Yes, we make the choices for ourselves. But we're minimizing the impact for our company and for the economy as a whole.

I am telling our customers: "...ok, get the layout done and we'll take care of the rest...".

The intention is simply that my crew arrives on site, does the job and leaves. No interaction with other people required.

As of now, I'm not taking on time-sensitive jobs. Simply because that I can't commit to jobs. I don't know when an operator is calling in sick. And I am the last person to give anyone a hard time about it. I asked my boys to be straight up with me. A few guys did , and no, I didn't lay them off!! I respect their concerns and I pass it straight to our customers. "Sorry, I don't have a crew available". Simple as that. And our customers understand. Not one of them gave me grief about it. They actually appreciate my approach of things. They're adopting and give me 48 to 72 hours of notice.

 

so long

j-ten-ner

  • Like 1
Posted
7 hours ago, Grumpy Bear said:

Let's use the favored lower numbers. This virus has an R0 of @ 2.5 at an interval of 7. 

The population of the USA is roughly 327 million. 

The entire population would be infected in roughly 145 days.

At a 1% MR 3,272,000 US Deaths. IS that acceptable? Is half that acceptable? That's your best case with 'let her rip'. 

 

Chicago Mayor is getting serious about containment. Police Super say WARING PERIOD IS OVER. Now we act. Ticket Arrest. What ever it takes for people to take it seriously. 

Mayor says if she has to shut down every park and street she will if people will not follow the LAW. 

City counsel has bought up over 2,700 hotel rooms to house homeless. 

State medical is say unless Shelter in Place compliance improves greatly that we will run out of med resourced in just a few more weeks. Beds mostly. Staff secondly. Swabs and Culture media. She also noted that Illinois by far already has the best compliance levels of the 50 states but more is needed. She reinforced there is NO CURE and there is NO VACINE. 

 

Med said phones have been used to anonymously track people movement for the entire USA.  

 

I don't mind, for one, watching from the sidelines. 

 

 

Note, it's not just the direct deaths (those that catch COVID19 and for whatever reason, even with proper medical attention, die from it or from it causing other complications).  There's also the much larger group of people who catch it and need hospitalization (either just a "regular" bed, or a spot in the ICU).  And those two groups (those that need to be hospitalized, and would then either die or eventually get well with proper medical attention), is expected to (particularly if we go along with our fearless leaders plan of getting back to work really soon) exceed our hospitals capacity (both in beds and equipment).  And at that point, it becomes everyone's problem, as it's not just COVID19 patients being turned away at the hospital, it's everyone, from babies with complications, to accident victims to any other medical problem requiring hospitalization.

 

So that wack-job Lt. Gov in Texas's idea of just getting back to work and the old and infirm are willing to risk it so he can go back to making money, is lying in two ways:

1)  he's NOT risking his life in any way.  First sign of a cough, he's getting the nearest ambulance to toss out whoever's in it and get him to the nearest, best hospital with a police escort, and then drag someone out of their ICU bed for him to sit on until the best doctor in the hospital see's him and he says "I think I have a bit of a cough and I might have COVID19.  You need to help me right now!"

2) he's risking everyone else's life, as anyone who happens to need hospitalization during his planned trainwreck can lose their life simply because of lack of resources, even if they don't have COVID19 or have recovered from it already.

  • Like 1
Posted

You people have it wrong. It’s a virus period. It’s not about who lives or dies. Chances are we’ll get it eventually. The concern is overwhelming the hospitals. Period. Even ifs there’s a vaccine the effectiveness will vary from year to year, just like any flu. There’s only so much money in the kitty. There’ll come a time when economics vs our new status quo comes to play. Fear mongering doesn’t do anyone good.

 

 

Sent from my iPhone using Tapatalk

Posted

We’re about to be hit with the stay at home order. It basically covers business. You can still jam the store. My brother’s business among other things does eq repairs and sales. By design it spaced out. The technicians wear gloves. Are spaced by bays and usually work alone. They even have mask. The secretary’s are separated by at least six ft. The sales staff, my brother, nephew, have their own office. Parts guys too. One machine they work on usually has a crew of 4-6 waiting to work on a pipeline Row. So with a stay at home order he’ll be eligible for the basically free money to meet payroll and over head. The dilemma, some of the staff will actually make more than a 40hr paycheck on unemployment. They’ll be in a hurry to get back to work. Stupid, stupid, stupid. One of the new requirements for being a congressman should be a IQ test. I’ve could have done better.


Sent from my iPhone using Tapatalk

Guest
This topic is now closed to further replies.

  • Latest Articles

  • Posts

    • Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • How about them NICKS!!! 
    • Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...