Jump to content

Problems tinting windshield?

birdsdawordxxx
 Share

Recommended Posts

TNTSierra Senior Enthusiast

TNTSierra

Posted
Posted (edited)

During the summer time during college, I would help my buddy who owns a tint shop and we both used to tint our windshields 35%. The amount of UV protection,  along with heat rejection was awesome. We used to tint windshields inside the vehicles all the time, BUT, with the amount of electronics in these newer vehicles the "RISK" isn't worth it, I know first hand, I have seen a GMC Denali come back with messed up electronics in the dash! It cost my buddy almost $2k to have it fixed. He is not a guy who argues or wants to fight with the customer. He quite professional! He called the local Chevy dealership who he works with for tint jobs on new/used vehicles that are sold, and they admitted it was messed up.  So if someone wants it tinted from now on. He does it outside of the vehicle.

 

Meaning......if someone needs a new windshield installed, he will do it, then have it installed at the glass shop next door, or if you wanna pay $200 to have it removed, then reinstalled he would do that.  I love my front windshield tinted.....it's the best, but last month, I wouldn't do it because of this reason, if I ever need a new windshield, it will get done though!!  I only have a 5% strip along the top of the windshield now that goes evenly with the rear-view mirror mount

 

The other problem with tinting a windshield is that it requires a large amount of water for the tint to move properly on the glass without causing glue marks on the window and/or creases in the tint. Even when he has put down sheet after sheet on the dash, it still gets saturated pretty good. Before someone on here states that he doesn't know what he is doing.  He has been in business over 25 years, and actually went to Vegas and competed in there tinting contests in the 90's and placed, so he knows how to tint!  I actually get a kick out of going to tint shops when I see them in certain towns and will go there and ask questions, and also ask to see their work and it's always entertaining to see other peoples work. Some is very good, while others....not so much.

 

 

Edited by TNTSilverado
  • Like 2
  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

TNTSierra
TNTSierra

During the summer time during college, I would help my buddy who owns a tint shop and we both used to tint our windshields 35%. The amount of UV protection,  along with heat rejection was awesome. We

BlancoSilverado
BlancoSilverado

OK, lets stop right there.    Local/state laws can stop a shop legally from tinting the entire windshield. Here in CA you can tint 6 inches down from the top legally.  If you have a sig

topgear1224
topgear1224

Yep. Only film I've seen shops offer without a liability release is the 85% UV films. Btw here is a show truck (on the left) with 5% on the sides and 35% on the windshield. No way you aren't getting

Posted Images

jljii Enthusiast

jljii

Posted
Posted

Getting my windshield and front windows done today mainly for heat.  No mention of a any type of waiver.  

topgear1224 Enthusiast

topgear1224

Posted
Posted
Getting my windshield and front windows done today mainly for heat.  No mention of a any type of waiver.  
If tinting the front windshield is illegal in your state I would just assume that you are already "at your own risk".

Sent from my SM-N975U using Tapatalk

birdsdawordxxx Enthusiast

birdsdawordxxx

Posted
  • Author
Posted
1 hour ago, jljii said:

Getting my windshield and front windows done today mainly for heat.  No mention of a any type of waiver.  

Let me know if you run into any issues with your windshield. 

sharkeysierra Enthusiast

sharkeysierra

Posted
Posted

There is definitely a lot of water/solution used to clean or used to lube the tint before it’s squeeged. So that’s a viable excuse to sign that waiver. Especially with a POV story above. 
 

There are other tint shops around as well. 

Jsarver Enthusiast

Jsarver

Posted
Posted

Got my ceramic done today. 20 on front windows and 55 over factory tint and windshield. Guy has been in business 20 years and told me he covers the dash in an absorbent mat and crams a soak rope between the dash and windshield glass. Says it’s the only way to do it safely. Rang water out of that soak rope when finished. Short drive home with no noticeable flaws.  

  • Like 1
L87Powered Enthusiast

L87Powered

Posted
Posted

I've had no problems with tinting the windshield. '20 Sierra Denali. I asked before having it done if there were any issues, given the HUD, cameras and such. Guy said no problem tinting the windshield on this truck. Guy is a professional and has done my tint for years. 

Dersch Enthusiast

Dersch

Posted
Posted

I have 35% on my windshield and its perfect. Shop gave me no issues. I did 15% on all the other windows. I have ran this setup on 4 vehicles in a row now with no issue. Ive had work done in either ohio or indiana and never signed a waiver. 

 

I will say idk what type of tint he used this time but from the outside ivd never seen such a dark looking tint. Makes me nervous but it is what it is. On the inside for me its perfect 

topgear1224 Enthusiast

topgear1224

Posted
Posted
I have 35% on my windshield and its perfect. Shop gave me no issues. I did 15% on all the other windows. I have ran this setup on 4 vehicles in a row now with no issue. Ive had work done in either ohio or indiana and never signed a waiver. 
 
I will say idk what type of tint he used this time but from the outside ivd never seen such a dark looking tint. Makes me nervous but it is what it is. On the inside for me its perfect 
How is the night vision on back roads without street light?

My 03 2500 is 5% all around (no factory tint) and works really well. But this new truck we did 15 front 20 rear over factory tint and it looks way too light. Can see right into the back seat

Going in today to get it replaced wondering if doing something to the front glass would help.

Sent from my SM-N975U using Tapatalk

Dersch Enthusiast

Dersch

Posted
Posted
7 hours ago, topgear1224 said:

How is the night vision on back roads without street light?

My 03 2500 is 5% all around (no factory tint) and works really well. But this new truck we did 15 front 20 rear over factory tint and it looks way too light. Can see right into the back seat

Going in today to get it replaced wondering if doing something to the front glass would help.

Sent from my SM-N975U using Tapatalk
 

No issues here. 

 

Biggest issue us that with the tint and the stupid bright screen when in reverse the light blinds me and tends to reflect off my tint

  • Like 1
Libertas Enthusiast

Libertas

Posted
Posted

I have my entire front done at 35% - I have no issues seeing at night.  Sides are 15%, so front doesn't really look that dark.

lebag335 Enthusiast

lebag335

Posted
Posted
On 7/21/2020 at 5:23 PM, IlliniST said:

Yep. I'm in the Tomball area and had my Suburban done twice (had to replace the windshield) and never heard a thing about issues, waivers, etc.  Oh, and it was GREAT.  Kept the heat down considerably.

I’m in Texas too. How does the state sticker affect the windshield tint. I’m concerned about removing old sticker and damaging the tint? 

IlliniST Enthusiast

IlliniST

Posted
Posted
4 hours ago, lebag335 said:

I’m in Texas too. How does the state sticker affect the windshield tint. I’m concerned about removing old sticker and damaging the tint? 

I had no issues, but to be fair I didn't apply the sticker as hard-ass as I normally would. I pressed it into place and made sure it was stuck. Time to change and I picked the corner with a fingernail and it came off clean. Applied the next the same way. Just don't use a scraper or bad on it. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • bwiese
      seat base height *lowering* (base 40/20/40 seat, 2026 1500 WT std cab)

      By bwiese · Posted

      Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • bwiese
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By bwiese · Posted

      I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...