Jump to content

Recommended Posts

Posted

Has anyone found a good tailgate seal for the T1?

 

I've got a Bak X4 on my truck and I get a little road dust and water in around the tailgate. I'm wanting to get some sort of gasket to go around it to seal it when it is shut.

Posted

GM makes this, and I have it. Got it for Christmas, and installed it the same day. Took about 15-20 minutes total. I've never noticed a dirt or debris problem prior to installing it, and didn't notice a decrease afterwards. The Extang product looks good and might perform the job better than the GM Accessories part.

https://accessories.chevrolet.com/product/tailgate-gap-cover-84184471?vin=3GCPYFEL1LG353604&categoryId=98011

Sent from my SM-N960U using Tapatalk

Posted

As previously stated go with the GM version

Here are photos added to mine

0b6855f5099cd6ba23cf30ddef6b11aa.jpg6597245948c4db8614128e770bae3c4b.jpgb361be8a6a6470ba3b28d72d367540f1.jpg


Sent from my iPhone using Tapatalk Pro

  • Like 1
Posted

The GM only works along the bottom, and does not get the sides.

If you don't drive gravel roads you probably won't get a lot of dust, or drive in dry snow.

I get more dust and snow in the box than any other truck and its probably due to the multipro.

I also gotta delete the rear exit exhaust.

Sent from my SM-N975W using Tapatalk

Posted
40 minutes ago, RyanbabZ71 said:

As previously stated go with the GM version

 

How does it do with keeping dust and water out of the bed? It looks like it doesn't do anything for the vertical portions of the tailgate.

Posted
How does it do with keeping dust and water out of the bed? It looks like it doesn't do anything for the vertical portions of the tailgate.


It does not do anything for the drivers or pass side vertical. I can’t really comment how well it keeps dust out as I don’t have a bed cover.


Sent from my iPhone using Tapatalk Pro
Posted

This is the one I used and it covers everything. Got it off Amazon for around $25. They have them for the 2019 and up Silverado and Sierra with or without multipro tailgate. I have the multipro with a hard tri-fold from Gator and both together do a really good job. It will come with instructions on how to install also. Very easy.

 

Posted

I cant really add suggestions here, but I would like to ask a question in all honesty with no sarcasm intended:

 

Why do you need to seal off the bed of your truck, or to a greater extent why seal it water/dust tight?  

 

I guess I never really considered dust and dirt getting into the bed of a truck an issue seeing how its a truck, but that's the beauty of being able to customize a vehicle to personal desires right?  Regardless of your reasons, keep on keeping on, that's what makes customizing so fun!

Posted
18 minutes ago, Gangly said:

I cant really add suggestions here, but I would like to ask a question in all honesty with no sarcasm intended:

 

Why do you need to seal off the bed of your truck, or to a greater extent why seal it water/dust tight?  

 

I guess I never really considered dust and dirt getting into the bed of a truck an issue seeing how its a truck, but that's the beauty of being able to customize a vehicle to personal desires right?  Regardless of your reasons, keep on keeping on, that's what makes customizing so fun!

My bedcover does an excellent job of keeping water/dust/dirt out of the bed. The short fall is the tailgate isn't sealed. I have more issue with the dust/dirt and the dirt that comes from road water getting in the tailgate. I am a very neat person and opening my bed and seeing the black bedliner covered in dust/dirt on the last 1/3 of the bed drives me nuts (especially when I know I haven't hauled anything that would make it dirty). Not to mention that the little bit of water that gets in my bed is from the tailgate. I like to put stuff in the very back of the bed that would otherwise get wet if it was raining.

Posted (edited)
1 hour ago, Gangly said:

I cant really add suggestions here, but I would like to ask a question in all honesty with no sarcasm intended:

 

Why do you need to seal off the bed of your truck, or to a greater extent why seal it water/dust tight?  

 

I guess I never really considered dust and dirt getting into the bed of a truck an issue seeing how its a truck, but that's the beauty of being able to customize a vehicle to personal desires right?  Regardless of your reasons, keep on keeping on, that's what makes customizing so fun!

Sometimes people haul things they would prefer to keep reasonably clean and dry.

Edited by Salsa De Piña
Posted
15 minutes ago, Salsa De Piña said:

Sometimes people haul things they would prefer to keep clean and dry.

I guess I've never had an issue with water getting in the bed of my truck through the tailgate and ruining anything.  I completely understand the worry though, I'm OCD about certain things as well. ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Check the windshield washer reservoir bolt. They ALL are loose from the factory. 
    • If one can't be found, a good automotive upholstery shop should be able to replace/sew in a new panel where the damage is on the old cover. It might not be the cheapest option..
    • Does your dealer charge you for the tire rotation on top of the oil change price ?. I haven't had any service work done at my dealer yet other than when I brought it back soon after owning it to have the front end aligned to correct the steering wheel being off center a bit. Oh they called me at least twice hounding me to bring it in for an oil change and pushing a 300.00 package of oil change and tire rotation and whatever other quick simplistic checks they would do. Only going off of what a friend gets charged for his half ton for the basic oil change and its the same amount of oil as the L8T holds, it was about 150.00. Once one buys a set of tires from most shops these days or so I believe, they will do free tire rotations and some do free tire balancing as well as free tire repairs.    Certainly doing a tire rotation is no five minute job, and definitely not at home but because I run a set of winter tires on their own wheels, I swap them at home and its a one tire at a time deal because of the tire season swap although I jack up the rear and do it and drop it back down and then raise the front and do them and coordinate the tire rotation into that process for both sets of tires. I am using a floor jack though and if I need to raise both ends at once I use a couple sets of jack stands to have all four tires off the ground. I use either an air impact or battery impact and have electric impact as well so no shortage there of easy methods to spin the lug nuts, and then retorquing the lug nuts. None of it goes quick though but my wages are cheap though ... zero. I live an hour out of town, its easier just to do things like that myself than waste a bunch of time in town and having to make an appointment and probably a special trip and sit there at the tire shop waiting for them to get my vehicle in and get it done and not screw something up in the process. 
    • I do have the 8 speed.  Interestingly enough, after driving my truck for the past 2 days now, I have not had the clunking issue at all!  I am beginning to think it may have been suspension/leaf spring related, and somehow when the shop put my truck on the lift to do their initial inspection, it relieved some built up tension/pressure that was causing my problem.  I swear it felt I was a bull rider on a bucking bull the way the truck would almost rock back and forth slightly before the big thud/clunk when coming to a stop.  I am hoping I got lucky here and it's gone for good.
    • Bring it to discount tire. They do free rotations even if you didn’t buy your tires there. I didn’t believe it until I tried and they did. You can tip the employee if you would like 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...