Jump to content

Recommended Posts

Posted

I've come a long way in life.  In high school my family was homeless on the street.  We were so poor that we invented ways to eat potatoes so it would remain interesting since all we could afford for a 15-day pay period was potatoes, and a few extras that we spread thinly over those 15 days, such as butter, or cheese, or sour cream, etc.  I've busted my ass to have a better life.  The fact that I wake up everyday and have a nice new truck in my driveway is something I appreciate in ways most people would never comprehend.  This was the first vehicle I got to splurge on, and some of that splurging was an exhaust. 

  • Like 2
Posted
On 11/13/2021 at 5:03 PM, Black02Silverado said:

Speaking of first vehicles.  Mine was a 1968 Impala Custom, 2 door with the 250hp 327 and turbo 400 transmission.  I paid $450 for it with 75k miles on it back in 1980.    My parents let me put duals on it.  I used what they had back then called a turbo muffler. Wasn't loud but not stock either.  I wasn't allow to put a Thrush muffler on it.  Anyone remember them?  :lol:

I had the 300hp 327 4 speed, Impala in high school. With hindsight, I should have never gotten rid of that car when I did. It came with duals. Louder than stock but not so loud I woke up the neighborhood

  • Like 1
Posted
3 hours ago, txab said:

I had the 300hp 327 4 speed, Impala in high school. With hindsight, I should have never gotten rid of that car when I did. It came with duals. Louder than stock but not so loud I woke up the neighborhood

My 68 after a while the lifters went bad and so I upgraded the heads to double hump heads with 2.02 valves and a blueprinted Crane 300hp 327 came.  So basically it became a 300hp 327 after that.  Man, it was nice but then I had to run premium or it would ping for ever. LOL

  • Thanks 1
Posted

My third car was a 68 fastback 307 power glide. It took a little work to get it in the 15s. My first was an RX3.

  • Like 2
Posted

Me being a kid found out that if I put it in 1st and didn't shift that it would shift on it's own and hard. LOL  Then slowing down it would shift back down.  Good old turbo 400.  Bullet proof. Oh those were the days. :)

  • Like 1
  • Haha 1
Posted
2 hours ago, Black02Silverado said:

My 68 after a while the lifters went bad and so I upgraded the heads to double hump heads with 2.02 valves and a blueprinted Crane 300hp 327 came.  So basically it became a 300hp 327 after that.  Man, it was nice but then I had to run premium or it would ping for ever. LOL

I remember having to run premium too. Mine was a 64, my high school buddy had a 68, iirc. I'm sure mine was turned into somebody's lowrider after I sold it

  • Like 2
Posted
1 minute ago, Black02Silverado said:

Me being a kid found out that if I put it in 1st and didn't shift that it would shift on it's own and hard. LOL  Then slowing down it would shift back down.  Good old turbo 400.  Bullet proof. Oh those were the days. :)

My father had a 72 ss elcamino the first time he put in L1 and left it, I thought there she blows. She let out a bark when it hit second like speed shifting. He had dually that would do it too. It was hilarious. 

  • Haha 2
Posted
17 minutes ago, redwngr said:

No one bragging about having an old GM with the 2 speed powerglide automatic??

Drove a car with the Powerglide too

  • Like 1
Posted (edited)
33 minutes ago, redwngr said:

No one bragging about having an old GM with the 2 speed powerglide automatic??

I had one in a 69 Chevelle nomad station wagon a hand me down when I started driving with a 307 2bbl with a 2 speed powerglide and never had a problem with it. All you had was PNDL on the column.

 

That 307 would burn some oil I ran through 2qts of oil and a can of STP oil treatment every week or 2 but it got me around till the car just rotted out and wasnt worth putting money in the motor then I stepped up to a 75 Impala with a 350 4bbl and a turbo 350 trans, man redwngr you brought back some old times for me.

Edited by Silverado4x4
Posted

Don't rag on the powerglide!!!  A friend of mine had a 64 Nova with a worked on 235 ci and powerglide ran mid 11's with it.  It was a 4bbl Holley carbed 9,000 rpm monster that ran a highly modified torque converter with a 6500 stall in it.  It was a fun car to work on most of the internal parts were small block parts so we always had a few spare parts.. :jester:

  • Thanks 1
Posted

First car I bought. 66 Ford Galaxie 500. Looked identical to this one. Same color! Even kept the hub caps. 

 

BangShift.com This 1966 Ford Galaxie 500 Was Just Traded In To A  Dealership...Interested? - BangShift.com

 

.030" over 352 4V Interceptor, 3 speed FMX. 9" Nodular with a Detrtiot Locker and 4.30 gear. Bosteder Sr. (Arnie Beswick) built trans. HTC prepared 360 forged truck crank, ARS blueprinted 427 rods. 9:1 TRW pistons, 335/390 ported heads. 428 CJ cam/lifter (CZA6250B). 428 SCJ alloy dual plane intake. 427 high ratio rockers/stands. Holley R1850 600 😉  Mallory dual point ignitor. I did my own distributor and carb tuning and porting/bench work. Moroso air filter, windage tray, 6 quart pan, pump. Wolfs Head 10W30. SUNOCO 260. American Rod Shop (Roger Griffin) did the machine work. All FORD save the oiling system. I and a friend did the assembly work. Scott Evans did the paint and my wife stitched up the interior. 

 

A sweet little 357 Magnum. 

 

Custom made for the car Kustom Headers long tube (Michigan) with Castler 3" glasspacks hanging off the long collectors and H pipe and turndown tips. There was nothing off the shelf at the time. This rattled store windows on main street and the confidence of quite a few 60's BBC GM full size cars. A money maker people laughed at...until......  It was the early 70's. Cops never bothered me. 

 

At 55 mph down US 30 spun 3,000 and gave 8 mpg. A drive between Clinton and Cedar Rapids also required a a few aspirin and some ear plugs. Oh and more than a tank of gas. 

 

I drove this on the street for about 4 years. (had to pay for itself) Retired to the track for 1 year (cost to much). Gave the driveline to my painters older brother in exchange for some more paint work and cut the car up with a gas axe and put it in a dumpster. Everyone wanted to steal it, no one wanted to pay for it. So...no one got it. 

 

:rant:

  • Like 1
Posted
3 hours ago, Grumpy Bear said:

First car I bought. 66 Ford Galaxie 500. Looked identical to this one. Same color! Even kept the hub caps. 

 

BangShift.com This 1966 Ford Galaxie 500 Was Just Traded In To A  Dealership...Interested? - BangShift.com

 

.030" over 352 4V Interceptor, 3 speed FMX. 9" Nodular with a Detrtiot Locker and 4.30 gear. Bosteder Sr. (Arnie Beswick) built trans. HTC prepared 360 forged truck crank, ARS blueprinted 427 rods. 9:1 TRW pistons, 335/390 ported heads. 428 CJ cam/lifter (CZA6250B). 428 SCJ alloy dual plane intake. 427 high ratio rockers/stands. Holley R1850 600 😉  Mallory dual point ignitor. I did my own distributor and carb tuning and porting/bench work. Moroso air filter, windage tray, 6 quart pan, pump. Wolfs Head 10W30. SUNOCO 260. American Rod Shop (Roger Griffin) did the machine work. All FORD save the oiling system. I and a friend did the assembly work. Scott Evans did the paint and my wife stitched up the interior. 

 

A sweet little 357 Magnum. 

 

Custom made for the car Kustom Headers long tube (Michigan) with Castler 3" glasspacks hanging off the long collectors and H pipe and turndown tips. There was nothing off the shelf at the time. This rattled store windows on main street and the confidence of quite a few 60's BBC GM full size cars. A money maker people laughed at...until......  It was the early 70's. Cops never bothered me. 

 

At 55 mph down US 30 spun 3,000 and gave 8 mpg. A drive between Clinton and Cedar Rapids also required a a few aspirin and some ear plugs. Oh and more than a tank of gas. 

 

I drove this on the street for about 4 years. (had to pay for itself) Retired to the track for 1 year (cost to much). Gave the driveline to my painters older brother in exchange for some more paint work and cut the car up with a gas axe and put it in a dumpster. Everyone wanted to steal it, no one wanted to pay for it. So...no one got it. 

 

:rant:

Yup some the cars I had I wish I still had them.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,902
    Total Members
    8,960
    Most Online
    whenindoubtuseahammer
    Newest Member
    whenindoubtuseahammer
    Joined
  • Who's Online   1 Member, 0 Anonymous, 309 Guests (See full list)


  • Latest Articles

  • Posts

    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...