Jump to content

Recommended Posts

Posted

Matches the truck nicely. :cheers:

 

Great concept, those 2-seaters. My wife would just continuously punch me in the ribs, so I opted for the single seat. :lol:

Haha well I still get the shots to the ribs, back of my arms pinched....she'll let me know when I'm doing something she doesn't like, which is more often than not lol. She loves going riding, but she's not the most confident behind the wheel. I've got a dirtbike too so I can still ride that as she's getting used to this

  • 2 weeks later...
Posted

My new Honda Pioneer 700-4. Not many miles on it so far but I think it will be around for a very long time.

post-127628-0-03438100-1444065662_thumb.jpg

post-127628-0-03438100-1444065662_thumb.jpg

post-127628-0-03438100-1444065662_thumb.jpg

post-127628-0-03438100-1444065662_thumb.jpg

  • 1 month later...
Posted (edited)
Has a full fold out windshield now.




ATVGURUFrontBrushGaurd001800x600.jpg

ATVGURUFrontBrushGaurd003800x600.jpg

Edited by Arkyrider
  • 3 weeks later...
Posted (edited)

My Gator XUV 825i. Cab heater. 72" blade.

 

post-122677-0-57941500-1450549947_thumb.jpg

post-122677-0-57941500-1450549947_thumb.jpg

post-122677-0-57941500-1450549947_thumb.jpg

post-122677-0-57941500-1450549947_thumb.jpg

Edited by Cowpie
Posted (edited)

Finally got some snow to fully check out the blade on my 825i. Worked great! I have about 600' of gravel drive and it cleaned everything off with no gravel displacement and I could roll on up into grass areas with no scalping. Let the wife take a few passes to get familiar with it and she loved it. Anyone wanting to stick a plow on a ATV/UTV and don't want to take out a mortgage to do so, this is the cat's meow. I can have the complete blade and mount off or back on in 15 seconds if I want to remove it. No hydraulics, no winch, etc. Blade angles for some fast throwing snow to the side either way. Gets the job done is a fraction of the time it took with my tractor/loader and a rear blade. Not a bad deal for a 72" blade, new, for under $1K.

 

http://www.agricover.com/snowsport/atv/

Edited by Cowpie
Posted

Got a 2005 Yamaha 350 raptor.

 

Mods done to it:

 

DG performance O-series exhaust

Pro-armor Nerf bars

Fly racing handlebars

Piaa extreme white headlights

Gytr jet kit

Fairly used ITP hole shot tires

And much more.

 

Believe it or not this bike beat a water cooled Yamaha yfz 450. But it was all luck only because he ran out of gas. But I don't wanna get to cocky. 8c2e92baabc3de6749f8b1785aa5a79f.jpg9ea84e6c656bcf287352d8d26a53b811.jpg3bc8c41d546cb5337200d2d8c49311f6.jpga03d1c8cc42e0fe3a651df5094537377.jpg222549ca803875092f8a94211aee2110.jpgb71543a044c3a4264ebf9a62f2092781.jpgd5ef6c4d5391f2ee3bdc54403a0c35fb.jpg2a49c38b193034a9cc5a8ceeddc6add3.jpg

 

 

 

 

Sent from my HTC Desire 626s using Tapatalk

Posted

I loved my Raptors. I want to get back into one when funds allow. I was tempted to trade my Arctic Cat for one but I love having the plow for snow season and 4x4 for towing the boat around when needed or a small trailer for firewood etc. I guess sometime being able to have both is my best choice :D

  • 2 weeks later...
Posted (edited)

Its been a few months since I've posted anything on this site. Here's my current quad, a 2006 Yamaha Grizzly 660

post-129158-0-15908300-1452339686.jpg

post-129158-0-67372600-1452339696.jpg

post-129158-0-98847400-1452339786_thumb.jpg

post-129158-0-15908300-1452339686.jpg

post-129158-0-67372600-1452339696.jpg

post-129158-0-98847400-1452339786_thumb.jpg

post-129158-0-15908300-1452339686.jpg

post-129158-0-67372600-1452339696.jpg

post-129158-0-98847400-1452339786_thumb.jpg

post-129158-0-15908300-1452339686.jpg

post-129158-0-67372600-1452339696.jpg

post-129158-0-98847400-1452339786_thumb.jpg

Edited by greg74
Posted

554945b1be1d7839a494aaf1e1197b21.jpg3fc353dacaa6b3b72894be9fe71f7083.jpg50919f9f7856e2e0a8d2e74415d1d3aa.jpga6071757eaa141276423a0e33e020447.jpg

Here are a few pics of mine. The Grizzlys are 2013 700s and the Ranger is a 2015 900.

 

Sent from my SM-N910V using Tapatalk

Posted

Just finished a rad relocate kit on my 1000, gonna be ordering new tires soon and also installing a heavy duty front bumper. Also need to finish up my steering upgrades

 

7964fae913f4a38755a88218480b9172.jpg

  • Like 1
Posted

Just finished a rad relocate kit on my 1000, gonna be ordering new tires soon and also installing a heavy duty front bumper. Also need to finish up my steering upgrades

 

7964fae913f4a38755a88218480b9172.jpg

I've been thinking about going to have a look at the outlander 570....any thoughts??

 

Sent from my Note 4

Posted

I've been thinking about going to have a look at the outlander 570....any thoughts??

 

Sent from my Note 4

My gf was looking at a 570 but settled for a renegade 500 because she got a killer deal on it. Haven't really heard much about the 570's honestly. I'm sure the smaller engine makes driveline parts last longer haha. As far as the build quality of a can-am I'm very happy with mine. Rides amazing, lots of low end, just an overall good bike. I understand a 1000 is not for everyone. That's a whole lot of power on tap and I only got mine cause I got it for a steal. But I love this bike, obviously has a few flaws just like any other bike but I really like the quality and fit and finish of the can am bikes so far. Plus I believe them to be the best looking utility bikes out there. I'd say go for it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • First off pay close attention to what Newdude pasted as he is a GM tech !.    I have a couple of questions which might cross off some questions others on this forum would be wondering about as well. So when was the engine oil changed prior to this trip, was it almost brand new oil or did it already have a fair bit of use on it before you started the trip.   Did you check the oil level on flat ground and was it at the full mark just before leaving on this trip which I gather from google map is about 700 miles or so. Why I ask and this is not the first time in history that has happened, that either a dealer or some other shop changed the oil on the vehicle and the vehicle left the shop and the owner ( you ) assumed the engine oil was full but in reality the person who changed the oil simply did not put enough oil into the engine .. it happens !. Also that a shop put the wrong viscosity oil in and an engine was not happy with that thinner viscosity and oil got past the rings at a higher rate than the proper viscosity. Not to mention if there was any leaking out of a drain plug or the filter gasket etc. 
    • You could, although in the end it really doesn't make much difference what comes out in exact terms since it comes down to putting enough back in so that there is enough volume so that something flows back out once the trans is up to temp for the check procedure. I presume your putting a pan on that has a drain plug but its probably the same pan mold/size as at least a while back no extra volume pan was made for the gas truck version due to the exhaust cross over pipe issue. All I can say as per volume I put back in and this was based on changing out the filter as some is trapped in it that does not come out until its removed because of the way its made inside and my truck had sat over night with the trans having been hot when shut down and dripping internally before I pulled the pan. I went off of what the trans shop suggested as a minimum volume he found worked which was 9 1/2 quarts and I had enough flow out of the stand pipe that I knew I was right on the money once it slowed to a dribble and never wasted hardly any oil but it would be totally fine to throw in a full 10 quarts too. I guess personally I wouldn't ruin a perfectly good pan by drilling a hole in it, not with the cost of replacement pans up here or the dorman one anyway with the drain was 500.00 when I priced one out a while back, totally stupid.    I might not have said before but this trans oil type really expands with heat and I think its been said on this forum and the trans shop said the same so I wanted to try and hit the lower temp of the range vs at the top or go shooting above it as that would allow more oil to flow out which wouldn't be ideal. 
    • Since I am going to be replacing the pan, I am just going to drill a hole in the original to drain it so I will be able to catch the fluid easier and measure how much I took out.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...