2014+ Suspension Lifts

brettls1 · February 28, 2014

Fabtech 4" lift, 295/60/20 trail grapplers on 20" BMF REPR's

CAtaylor · March 2, 2014

6 inch pro comp premium with adjustable shocks

How do you like the ride of the ProComp coilovers? I plan on upgrading mine from the spacers pretty soon and I am debating going this route or some custom Icons, Fox's or SAW's.

CAtaylor · March 2, 2014

Pro Comp 6" Stage 1. Moto Metal 962 Wheels. 20x9 with 0 offset. 35x12.50 ProComp Xtreme MT2 tires.

Ljrussell94 · March 3, 2014

I'm not 100% sure, but mine had a 1/2" top mount spacer and it also had a bottom mount spacer that I thought measured 2". Here is something you can look at to see if your angles are maxed out. Look at your upper control arm (the top A arm) and see how close it is from hitting the droop stop right under it. If you have a half inch or so you'll be fine.

I thought this way too at first. I have a 2" level up front and its still 1.25" higher in the back. The block itself is only 1". So basically whatever the block measures to be.. Double it and thats your lift. Im thinkin about grttin 1/4 spacers for in top to raise it another half inch so itll get closer to level. These new trucks are raked too much now

navinke · March 5, 2014

Has anyone done the 2.5" lift and put bigger rubber on the factory 18s?

brettls1 · March 5, 2014

Fabtech 4" lift, 295/60/20 trail grapplers 20" BMF R.E.P.R's and debadged. I posted pics of the trimming needed in the fender well. Looks a lot better in person. Gears, black bear tune and corsa exhaust next.

KUUG · March 5, 2014

Fabtech 4" lift, 295/60/20 trail grapplers 20" BMF R.E.P.R's and debadged. I posted pics of the trimming needed in the fender well. Looks a lot better in person. Gears, black bear tune and corsa exhaust next.

Looks good in the pictures!

What offset did you go with on the wheels?

brettls1 · March 5, 2014

Looks good in the pictures!

What offset did you go with on the wheels?

Thanks, BMF only makes these wheels in 0 offset. It took some trimming but I think its the perfect offset, not too far in and not too far out.

LTZ2014 · March 6, 2014

Posting pics for ChandlerPerry5. I know it's a 5" rough country. He can chime in with the rest of the specs.

DLS-001 · March 6, 2014

Would love to know what size/offset those Rockstars are and what tires... looks killer!

Chandlerperry5 · March 7, 2014

Would love to know what size/offset those Rockstars are and what tires... looks killer!

Tires are 305/55/20 copper Zeon ltz tires, with 20x10 and a - 24 offset

jdthomas24 · March 8, 2014

How do you like the ride of the ProComp coilovers? I plan on upgrading mine from the spacers pretty soon and I am debating going this route or some custom Icons, Fox's or SAW's.

sorry---- they are about the same as y Dirtlogic from Fabtech i had.. nothing bad to say about them at all...

NitroDatsik · March 9, 2014

I have the same setup but my tires are Falken wild peak and it rubbed about 1/8" so I just cut a little bit of the fender mat n wacked the back side of the sheet metal n no issues nowfingers width of clearance now.

Wicked Galaxy Note 3

Onmytab · March 9, 2014

Hey there so right now I have a 2.5" leveling kit with 295/60/20 nittos. I was wondering if people on here with 4"-6" lift kits can still go through the automatic car wash. I'm thinking of putting a bigger lift on my truck. Would like to go 6". With winters like this in Michigan to cold to hand wash and I was it usually twice a week. Black truck gotta keep it clean. Thanks in advance!