2014+ Suspension Lifts

zoomiejr2 · March 5, 2016

Yes I had to trim some. They catch in reverse it's tight but not unmanageable. Most trimming was done on the wheel well plastic.

I had to trim my front valence, lots of room in the back of the wheel well though

Sent from my E6853 using Tapatalk

graves_7 · March 5, 2016

Anyone running the Zone 6.5" lift with the the add a leaf? If so, how much rake do you have now?

Sent from my SM-T710 using Tapatalk

teaman · March 6, 2016

Ok...hoping someone has had experience with this. I have a 3-month old 2015 GMC Sierra 1500 with 1200 miles on it. I had the 6" lift put on about 6 weeks ago with 500 miles on it. Today, I'm driving down the road and the traction control and abs lights come on the dash. It says that I need to service Stabilitrak and ABS. I checked the cables in the front to make sure nothing is stretched out or disconnected...everything looks fine. I've driven it a couple of times since, the lights have remained on.

I did go over a speed bump at about 40mph yesterday (didn't see it), but this didn't seem like it was a big deal at the time. Also, the steering wheel lock seemed to have trouble engaging twice today after I parked and shut it off. Strange, but again, nothing serious. I baby this truck.

Any help would be appreciated.

Edited March 6, 2016 by teaman

Paulybee · March 6, 2016

try bring it to auto zone let them put The code reader on and reset it. Maybe it's something stupid that rattled loose. Probably easier than dealing with The dealers BS

teaman · March 6, 2016

try bring it to auto zone let them put The code reader on and reset it. Maybe it's something stupid that rattled loose. Probably easier than dealing with The dealers BS

I have a superchips programmer that reads codes, but it doesn't seen any. Are the codes for my problem something the superchips programmer won't see and the auto zone reader will?

zoomiejr2 · March 7, 2016

Ok...hoping someone has had experience with this. I have a 3-month old 2015 GMC Sierra 1500 with 1200 miles on it. I had the 6" lift put on about 6 weeks ago with 500 miles on it. Today, I'm driving down the road and the traction control and abs lights come on the dash. It says that I need to service Stabilitrak and ABS. I checked the cables in the front to make sure nothing is stretched out or disconnected...everything looks fine. I've driven it a couple of times since, the lights have remained on.

I did go over a speed bump at about 40mph yesterday (didn't see it), but this didn't seem like it was a big deal at the time. Also, the steering wheel lock seemed to have trouble engaging twice today after I parked and shut it off. Strange, but again, nothing serious. I baby this truck.

Any help would be appreciated.

Some people had troubles with this, I would go back to the shop that did the work get them to look at it.

Sent from my E6853 using Tapatalk