Jump to content

Recommended Posts

Posted

Hey does anyone know if 295 60 20 toyo open country at 2 extreme would fit on a 14 sierra with 2 inch front level kit on stock 20s???Thanks

  • Like 1
Posted

Hey does anyone know if 295 60 20 toyo open country at 2 extreme would fit on a 14 sierra with 2 inch front level kit on stock 20s???Thanks

If you look at the post 2 posts above yours, you should get a good idea.

Posted

If you look at the post 2 posts above yours, you should get a good idea.

Ya i saw that but those tires are over a inch smaller in dia..not worried bout the width!

Posted

I know its probably been asked before, but I can't find a decent answer to it. Will the Rancho Quicklift struts fit the Z71? It says "excludes Z71" on their website, but I'm not sure why it would be excluded. If the Quicklift doesn't work, will the Bilstein 5100 ride adjustable work?

Posted

Anyone have some pics of a truck running RC 2.5 leveled on Toyo Open Country MT or Cooper Discoverer STT on

285/65/17 or

285/65/18 or

Very close to that size, any opinions y'all have let me know, thanks in advance!!

I run cooper discoverer ATP with Xd's offset of +18 run run on 285-75-17.. this puts it just a hair outside of the fender but i say its dead even. putting on a new set monday going to a cooper st/maxx 295-70-18 TIS wheels with a 0 offset, it might rub a little not sure

Posted

I run cooper discoverer ATP with Xd's offset of +18 run run on 285-75-17.. this puts it just a hair outside of the fender but i say its dead even. putting on a new set monday going to a cooper st/maxx 295-70-18 TIS wheels with a 0 offset, it might rub a little not sure

Definitely keep us posted on the 295 70s. I really want to run those same tires but not sure on clearance issues.
Posted

Definitely keep us posted on the 295 70s. I really want to run those same tires but not sure on clearance issues.

will do, i also have a 2.25 level kit, the current tires I run are 33.75 tall and the new set they will run 34.25 and I calculated about 1" of easy clearance left so they shouldn't rub

Posted

Definitely keep us posted on the 295 70s. I really want to run those same tires but not sure on clearance issues.

 

This was always my dilemma. There are a few guys on here running 295/70/18 that do rub - I forget which offset though.

 

295/70/17 is not a problem and the way im leaning

Posted

Diameter wise 295/70/17 will likely be fine it will be offset that will be the question. 295/70/17 is roughly 33.3-33.5"x12ishx17. Again like most 33-34" tires the thickness will be the issue. I suggest +12-0-12 offset.

 

I think AZ has his 295/55/20s not rubbing with +19 offset on fuel Mavericks. I've since switched my choice to method mesh at 0 offset. Should he good to go on either 285/70/17 or 295/70/17

Posted

yes rancho quick lifts fit Z71 trucks

 

Thanks for the reply.

 

Anyone run Quicklift with 275/70-/18, stock Z71 wheels? Any rubbing?

Posted (edited)

I'm running 305 55 20 on a -12 offset3a84efcbb8146d8f7224c4a5bb0acf0a.jpg

No rubbing.

My tires are weak lol hate them, waitin till I do my 7" lift to change them tho

 

My Current Setup,2014 Silverado 2LT Z71,RCX 2.5 Level Kit,NittoTerra 33x12.50R20Lt's,Fuel - Octane D509 20x9 -12 Offset,All Chrome Plasti-Diped

My Up Coming Mod's,McGhauphy's 7"-9" Economy Lift Kit,Federal Couragia M/T's 35x12.50R20Lt's,OEM Tow Mirror's,Bushwaker OE Fender Flairs,Gtr Lighting Led Conversion Kit's 2,200 Lumen(High,Low,Fog),Black Spyder Venom Bull Bar,Iron Cross HD Step's.

Edited by 2014Sandylifted
  • Like 1
Posted

I'm running 305 55 20 on a -12 offset3a84efcbb8146d8f7224c4a5bb0acf0a.jpg

No rubbing.

My tires are weak lol hate them, waitin till I do my 7" lift to change them tho

 

My Current Setup,2014 Silverado 2LT Z71,RCX 2.5 Level Kit,NittoTerra 33x12.50R20Lt's,Fuel - Octane D509 20x9 -12 Offset,All Chrome Plasti-Diped

My Up Coming Mod's,McGhauphy's 7"-9" Economy Lift Kit,Federal Couragia M/T's 35x12.50R20Lt's,OEM Tow Mirror's,Bushwaker OE Fender Flairs,Gtr Lighting Led Conversion Kit's 2,200 Lumen(High,Low,Fog),Black Spyder Venom Bull Bar,Iron Cross HD Step's.

I'm surprised those don't rub. Good to know though my wheels have the same offset
  • Like 1
Posted

Definitely keep us posted on the 295 70s. I really want to run those same tires but not sure on clearance issues.

Got them on today, they look great will post pics later. a very slight rub on the wheel well on the backside middle of the front tire, very minor trimming will fix it, theres no rub on the front fender side. tires stick out almost an inch outside fenders

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,028 Guests (See full list)


  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...